Knobs

Knob - Chicken Head, Push-On, for knurled shaft
Colors Available:
High quality black plastic chickenhead knob. 1-1/4" in length. Push-on for split knurled shaft.
Starting at $1.20
Knob - Scalloped Edge, Indicator Line, Set Screw, Brass Insert
Colors Available:
The P-K801-BRASS is a custom built Davies 1900H clone. This knob features a brass insert in addition to a thick plastic build resulting in the most solid version of this knob available. The thick plastic eliminates the unfortunate hairline fractures that can commonly be found near the set screw of other versions. The P-K801-BRASS has an infilled painted indicator and fits ¼” (6.35mm) pot shafts.
$0.95
Knob - Davies, 1470, Daka-ware, Large, Pointer
Colors Available:
High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.
  • Height: 0.50 in.
  • Length: 1.13 in.
  • Fits ¼" shaft with set screw
Starting at $1.99
Knob - Plastic, Set Screw, Skirted w/ Dot, 1.01" Diameter
Large black plastic control knob with set screw and brass insert. This skirted knob features a radial-brushed metal cap. The grip has large fluting with a white dot indicator on both the top of the grip and on the skirt of the knob. The style is similar to the Cosmo knobs found on many Moog synthesizers. Fits ¼” (6.35mm) pot shafts.
Starting at $1.05
Knob - Davies, 1910 and 1913, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)
  • Height: 0.50 in.
  • Diameter: 0.75 in.
  • Fits ¼" shaft with set screw

Davies 1913 (Large)
  • Height: 0.625 in.
  • Diameter: 1.13 in.
  • Fits ¼" shaft with set screw
$2.75
Knob - Plastic, Set Screw, Neve / Marconi Style, 0.495” Diameter
Colors Available:
Plastic knobs with a set screw and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.495 inches. Fits ¼” (6.35mm) pot shafts.
$0.99
Knob - K5, Black, Set Screw, for Marshall
Cap Colors Available:
Black K5 knob with gold or silver cap and long indicator line. ¼" shaft with set screw. Replacement for Marshall. Measures 0.75" in height. See P-K342-NOI for a version with no indicator line.
$2.95
Knob - Plastic, Set Screw, Boss Style, 0.63” Diameter
Colors Available:
Plastic control knob with set screw and brass insert. This skirted knob is similar in style to the knobs found on many Boss pedals. It features a fluted grip with a radial-brushed metal top. The indicator line extends from the top of the down down through the bottom of the skirt. Fits ¼” (6.35mm) pot shafts.
See P-K370X for a skirted version.
$0.95
Knob - Plastic, Set Screw, Pinched w/ Line, 0.630" Diameter
Colors Available:
Small plastic control knob with set screw and metal insert. This knob has a pinched grip similar to the Davies 1510 but features a smaller diameter and scooped cutout for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.
Starting at $0.85
Knob - Plastic, Set Screw, Skirted w/ Top Line, 0.87" Diameter
Black plastic control knob with set screw and brass insert. The grip has a thick vertical knurl with an indicator line on a raised top. This skirted knob is a close match to the knobs used on some late 1960s Fuzz Face® pedals as well as the Eric Johnson signature model. Fits ¼” (6.35mm) pot shafts.
  • Height: 0.77 in.
  • Diameter: 0.87 in.
  • Fits ¼" shaft with set screw
$0.99
Knob - Mini Indicator, Set Screw, 15mm x 11mm
Colors Available:
Mini fluted knob with infilled indicator line. Pairs well with the larger P-K850X. Fits ¼” (6.35mm) pot shafts.
  • Height: 11mm
  • Diameter: 15mm
  • Fits 1/4" shaft with set screw
Starting at $0.75
Knob - Plastic, Set Screw, Vertical Line, 0.525" Diameter
Colors Available:
Small plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top and a stylish vertical knurl. The style is similar to the Boss middle knobs used on many pedals. Fits ¼” (6.35mm) pot shafts.
$0.95
Knob - Plastic, Set Screw, Neve / Marconi Style, Wing, Skirted, 1” Diameter
Colors Available:
Plastic wing knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The grip diameter is 0.693 inches with a 1 inch clear skirt. Fits ¼” (6.35mm) pot shafts.
$1.85
Knob - Davies, 1400, Daka-ware, Small, Pointer
Colors Available:
High-quality USA made knobs from Davies Molding. The small 1400 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals and audio equipment such as the Pultec EQP-1A.
  • Height: 0.38 in.
  • Length: 0.84 in.
  • Fits ¼" shaft with set screw
Starting at $1.75
Knob - Rogan, 155 Series, Witch Hat, 0-10
High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay and a skirt numbered 0-10. This knob was used on many vintage Music Man amps and the 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
  • Height: 0.65 in.
  • Diameter: 1.13 in.
  • Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-3 Large Witch Hat w/ Arrow
$3.15
Knob - Rogan, PT Series, 1PS, Small, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
  • Height: 0.71 in.
  • Diameter:0.57 in.
  • Fits 6mm D Shafts
  • Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
$1.65
Knob - Top Hat, Embossed Numbers, Gibson Style
Colors Available:
Gibson style top hat knob with embossed numbers. Multiple color options available. Fits fine knurled pot shafts.
$2.25
Knob - Gotoh, Dome, set screw, knurled for grip, 1/4” Solid Shaft
Colors Available:
¼” (6.35mm) solid shaft versions of Gotoh’s dome knobs. These premium knobs feature a diamond pattern knurl, a high quality finish and a matching set screw. For the 6mm solid shaft versions, see P-K250X
Starting at $6.50
Dial Plate - 0 to 100, Black on Brushed Metal
Dial plates with 0-100 indicator marks. These plates are a simple way to add panel graphics to controls. They are easy to install beneath the nut of a potentiometer like a washer. The silk screened graphics on the brushed metal plate gives projects a clean and professional appearance. 40mm Dial Plate
  • 40 mm (1.575”) outer diameter
  • 9.95 mm (0.392”) inner diameter
  • Best for 25.4mm (1”) or smaller knobs

60mm Dial Plate
  • 60mm (2.362”) outer diameter
  • 9.95mm (0.392”) inner diameter
  • Best for 40.6 mm (1.59”) or smaller knobs
$1.70
Knob - Cliff, K1C, Set Screw, 25.4 x 15.1mm
Cap Colors Available:
Skirted knob with dot indicator and a unique fluted grip. The Cliff K1C knob can be found on classic equipment such as the Zonk Machine fuzz pedal and most notably on the EMS Synthi synthesizers.
  • Height: 15.1mm
  • Diameter: 25.4mm
  • Fits ¼" shaft with set screw
Starting at $1.85
Knob - Plastic, Push-On, Micro, Dot Indicator, 0.305" Diameter
Colors Available:
Micro sized plastic control knobs for coarse knurled shafts. These super slim knobs are perfect for cramped panels, adding mods, and sub-controls on units with a variety of knobs. They have an infilled dot indicator. This style of knob can be found on many eurorack modules from Befaco and others. Fits T18 knurled shafts.
$0.55
Knob - Top Hat, Black with Silver Cap, Gibson Style
Black Gibson style top hat knobs with silver caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
$2.25
Knob - Plastic, Set Screw, Knurled w/ Top Line, 0.724" Diameter
Colors Available:
Medium sized plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. This style of knob can be found on some versions of the ProCo Rat. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K410-X.
$0.98
Knob - Aluminum, Set Screw, Notched Tip, 1.25" Diameter
Colors Available:
1.25" diameter knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.
$3.99