Knobs

Knob - Aluminum, Matte Finish, Set Screw, Short Line, 0.5" Diameter
Colors Available:
Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.5”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K611-X. For a brushed finish version of this knob, see P-K655X.
$1.95
Knob - Rogan, RB-67 Series, Small
Colors Available:
High-quality USA made knobs from Rogan Corp. These small knobs feature a metal insert and a spun aluminum inlay with a black indicator line. The RB-67 Series from Rogan is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers.
  • Height: 0.48 in.
  • Diameter: 0.51 in.
  • Fits ¼" shaft with set screws

A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted
$2.65
Knob Cover - Dunlop, rubber, for MXR knobs
Replacement black rubber knob cover for Original MXR knob (P-ECB-130). Original Dunlop replacement part.
$1.80
Knob - Pointer, Skirted, RCA Style, 1.28” Diameter
Colors Available:
Large vintage style skirted pointer knob. This knob is styled after the RCA “fester” knobs found on countless vintage electronics. The knobs feature a hex set screw, and fit ¼" solid shaft potentiometers.
$1.15
Knob - Scalloped Edge, Indicator Line, Set Screw
Colors Available:
Set screw knob with indicator line and scalloped edge. Measures .50" in diameter and .6" in height. Davies 1900H clone
$1.50
Knobs - Fender®, Stratocaster, 1 Volume, 2 Tone
Package of 3
Colors Available:
Original Fender Replacement Knobs For Strat. Push-On. Fits both coarse and fine knurled pots.
Starting at $6.25
Knob - Cliff, K1C, Set Screw, 25.4 x 15.1mm
Cap Colors Available:
Skirted knob with dot indicator and a unique fluted grip. The Cliff K1C knob can be found on classic equipment such as the Zonk Machine fuzz pedal and most notably on the EMS Synthi synthesizers.
  • Height: 15.1mm
  • Diameter: 25.4mm
  • Fits ¼" shaft with set screw
Starting at $1.85
Knob - Small Chicken Head, Black, Set Screw
Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.
$0.95
Knob - Black Control, White "V" Line
Set screw with brass insert, ¼" shaft. Measures 1.28" diameter x .71" tall.
$1.55
Knob - Phenolic, Set Screw, Gaunt Chicken Head
High quality chicken head knobs with vintage gaunt design. The gaunt chicken head has a thinner band that extends above the base allowing for easy manipulation of the knob. This knob has a thick infilled indicator line and is made of solid phenolic. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
  • Height: 0.67 in.
  • Length: 1.26 in.
  • Fits ¼" shaft with set screw
$1.20
Knob - Push-On, Marshall Style, black base
Cap Colors Available:
.77" diameter x .62" tall. Fits both fine and coarse knurled pot shafts.
$1.45
Knob - Top Hat, Gibson Style see-through
Colors Available:
Gibson style top hat knob. Multiple color options available. Fits fine knurled pot shafts.
$1.95
Knob - Vintage Cupcake, 1 Volume, 1 Tone, Push-On
Package of 2
Colors Available:
Cupcake push-on volume and tone knobs. 0.985" diameter, 0.625" tall These knobs are just perfect for that retro effect, whether you're restoring an old Kay or Harmony guitar, or even an old Philco radio! Press fits on both fine and coarse knurled pots.
$4.50
Potentiometer Adapter Sleeve - Converts 4mm shaft to 6mm
This nickel-plated steel adapter sleeve converts a 4mm shaft potentiometer to 6mm shaft, allowing for 6mm knobs to be used on a wider range of potentiometers. An additional 6mm to 6.35mm adapter R-VADAPT-25 can then be used to fit 1/4” knobs (sold seperately).
$0.85
Knob - Fender®, Dual Concentric, For Jazz Bass
Genuine Fender® dual concentric knobs for Jazz Bass. Bottom knob fits ¼” solid shafts and top knob fits 3/16” solid shafts. Both attach with their included set screw. Top and bottom sold separately.
Starting at $5.25
Knob - Speed, Gibson Style see-through
Colors Available:
Gibson style speed knob. For 24 teeth knurled shaft.
$1.95
Knob - Dunlop, Jimi Hendrix Fuzz Face JH-F1
Genuine Dunlop replacement knob for Jimi Hendrix JH-F1 Fuzz Face. Knob is designed for use with solid/plastic 1/4” shafts and features set screw attachment. Two washers are included.
$2.40
Knob - Plastic, Set Screw, Neve / Marconi Style, Wing, Skirted, 1” Diameter
Colors Available:
Plastic wing knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The grip diameter is 0.693 inches with a 1 inch clear skirt. Fits ¼” (6.35mm) pot shafts.
$1.85
Knob - Aluminum, Set Screw, Skirted w/ Line, 1.125" Diameter
Colors Available:
Large skirted aluminum knob with indicator line and set screw. This solod aluminum knob has a 1.125 in. diameter skirt and ¾” grip that features a minimalistic style of fluting. The knob uses dual set screws to ensure no slipping once set on the pot’s shaft. Fits ¼” (6.35mm) pot shafts.
$4.75
Knob - Plastic, Set Screw, Neve / Marconi Style, Skirted, 1” Diameter
Colors Available:
Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line and a clear plastic skirt. The skirt diameter is 1 inch. Fits ¼” (6.35mm) pot shafts. For a non-skirted version see P-K398-X.
$1.85
Knob - Phenolic, Set Screw, Fairchild Style, Pointer
Phenolic pointer knobs with a set screw and brass insert. These distinctive pointers are close matches for the classic knobs used on Fairchild compressors like the 660 / 670. Each pointer features a V-shaped painted inlay indicator. Fits ¼” (6.35mm) pot shafts. Pairs nicely with P-K348 (see photo)
Starting at $4.70
Knob - Gotoh, VK1-19, Dome, set screw, knurled for grip
Colors Available:
Fits .237" solid shaft pots. Set screw, .75" diameter, .73" height. Fits on Bourns miniature solid shaft pots.
$6.55
Knob - Davies, 2310, Daka-ware, Triangle Pointer
High-quality USA made knobs from Davies Molding. This vintage-style 2310 pointer knob is made of solid phenolic and features a unique triangular shape. This classic design has fine vertical ridges on the sides providing grip when in use. The 2310 can be found on vintage equipment as well as boutique tube amplifiers from brands like Budda.
  • Height: 0.50 in.
  • Length: 1.19 in.
  • Fits ¼" shaft with set screw
$2.85
Knob - Aluminum, Matte Finish, Set Screw, Short Line, 0.75" Diameter
Colors Available:
Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K655X.
$2.15