Knobs

High-quality USA made knobs from Davies Molding. The small skirted 1610 knob is made of solid phenolic and features an indicator line on the 0.91” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.

• Height: 0.59 in.
• Diameter: 0.91 in.
• Fits ¼" shaft with set screw

The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.

• Height: 0.69 in.
• Diameter: 1.5 in.
• Fits ¼" shaft with set screw

This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs feature a slotted set screw, and fit ¼" solid shaft potentiometers. These are a close match to the Davies 1400.

• Height: 0.43 in.
• Length: 0.825 in.
• Fits ¼" shaft with set screw

Original Fender Replacement Knobs For Strat. Push-On. Fits both coarse and fine knurled pots.

Medium sized plastic control knobs with set screw and brass insert. These unique knobs have a subtle retro design that works well in many applications. They have a fine vertical knurl and a raised top with an infilled indicator line. This style of knob can be found on some versions of the ProCo Rat. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K410-X.

High-quality USA made knobs from Rogan Corp. These small knobs feature a metal insert, spun aluminum inlay, and a skirt with an infilled arrow indicator. The RB-67 Series from Rogan is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers..

• Height: 0.66 in.
• Diameter: 0.90 in
• Fits ¼" shaft with set screw

A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted

Plastic wing knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The grip diameter is 0.693 inches with a 1 inch clear skirt. Fits ¼” (6.35mm) pot shafts.

Replacement black rubber knob cover for Original MXR knob (P-ECB-130). Original Dunlop replacement part.

Small black plastic control knob with set screw and brass insert. These unique knobs are similar in style to the Davies 1140. They have a thick decorative knurl. A white dot as well as a vertical cutout channel serve as the indicator. Fits ¼” (6.35mm) pot shafts.

Large vintage style skirted pointer knob. This knob is styled after the RCA “fester” knobs found on countless vintage electronics. The knobs feature a hex set screw, and fit ¼" solid shaft potentiometers.

Anodized aluminum knob with channeled indicator line and set screw. This slim, solid aluminum knob has a diamond knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.

• Height: 0.56 in.
• Diameter: 0.496 in.
• Fits ¼" shaft with set screw

Gibson style speed knob. For 24 teeth knurled shaft.

High-quality USA made knobs from Rogan Corp. These small knobs feature a metal insert and a spun aluminum inlay with a black indicator line. The RB-67 Series from Rogan is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers.

• Height: 0.48 in.
• Diameter: 0.51 in.
• Fits ¼" shaft with set screws

A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted

Medium phenolic pointer knobs with a set screw and brass insert. These distinctive pointers are close matches for the classic knobs used on Fairchild compressors like the 660 / 670. Each pointer features a V-shaped painted inlay indicator. Fits ¼” (6.35mm) pot shafts.

• Grip Diameter: 0.75 in.
• Skirt Diameter: 0.935 in.
• Length: 1.275 in.
• Height: 0.765 in

Item Size P-K347-30-X Small P-K347-32-X Medium P-K347-52 Large P-K347-61 Extra Large

High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.71 in
• Diameter: 0.73 in
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.

Black Gibson style top hat knobs with gold caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.

Large knob with line indicator and set screw similar in style to the Davies 1500 and 1510 knobs. Pairs well with P-K380X. Fits ¼” (6.35mm) pot shafts.

• Knob Height = 0.60"
• Pointer Diameter = 1.06"
• Fits 1/4" shaft with set screw
• Oversized Davies 1510 Clone

Black pointer with white line. Fits a 3/16" knurled shafts. Push on Peavey part: 70902145

Gibson style top hat knob. Multiple color options available. Fits fine knurled pot shafts.

Genuine Fender® dual concentric knobs for Jazz Bass. Bottom knob fits ¼” solid shafts and top knob fits 3/16” solid shafts. Both attach with their included set screw. Top and bottom sold separately.

Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K310X.

Micro sized plastic control knobs for coarse knurled shafts. These super slim knobs are perfect for cramped panels, adding mods, and sub-controls on units with a variety of knobs. They have an infilled dot indicator. This style of knob can be found on many eurorack modules from Befaco and others. Fits T18 knurled shafts.

High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.84 in.
• Diameter: 0.62 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K272PS-W. A variety of different sizes are available from the PT Series.

High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.55 in.
• Diameter: 0.45 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.

Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.