Knobs

Sold individually. USA made vintage 90 degree blunt tip pointer washer made from steel. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs.

High-quality USA made knobs from Davies Molding. The large 1500 stove-style knob is made of solid phenolic and features an indicator line. The knob has a diameter of 1.125” with a .425” wide grip that runs the length of the entire knob. This classic Davies knob has been used on countless vintage electronics spanning many decades of use.

• Height: 0.56 in
• Diameter: 1.125 in.
• Fits ¼" shaft with set screw

Mini witch hat knobs in the style of vintage Fender® amps knobs. These small skirted knobs fit coarse knurled (T18) pot shafts. The skirt diameter is 0.912” inches and has 1-10 printed on it.

Gibson style top hat knob. 24 spline (for knurled split shaft pots).

High-quality USA made knobs from Davies Molding. The 1914 knob is the larger version of the classic 1900H found on countless synthesizers and pedals. This knob is made of solid phenolic and features an indicator line on the top. The knob pairs perfectly with the smaller diameter 1900 knobs such as the P-K801-BRASS-X as well as the skirted P-K234X knobs.

• Height: 0.50 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw

High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.55 in.
• Diameter: 0.45 in.
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.

Phenolic skirted knobs with a set screw. These unique knobs closely match the style of knobs used on vintage test equipment, radios, and studio equipment and are similar to the Davies 4104, 4106, and 4107. They feature an inlay indicator line in the skirt. Fits ¼” (6.35mm) pot shafts.

High-quality USA made knobs from Rogan Corp. These large phenolic knobs feature a brushed aluminum inlay and a skirt with an arrow indicator. With its 1.5” skirt diameter, this knob is much larger than the standard Fender and Music Man witch hat knobs. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.

• Height: 0.81 in.
• Diameter: 1.50 in.
• Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-2 0-10 Witch Hat

Gibson style top hat knob. Fits fine knurled pot shafts.

High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay, a small skirt and an infilled indicator line. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.

• Height: 0.62 in.
• Diameter: 0.84 in.
• Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-2 0-10 Witch Hat P-K155-3 Large Witch Hat w/ Arrow

High quality phenolic pointer knob with a vintage design. The retro pointer has a thick band that extends above the base allowing for easy manipulation of the knob making it a great option for rotary controls and switches. This solid phenolic knob has an infilled indicator line with a decorative diamond shaped top. Fits 0.25” (6.35mm) shafts with set screw and brass insert. This knob pairs perfectly with the smaller P-K356 knob.

• Height: 0.85 in.
• Length: 1.63 in.
• Fits ¼" shaft with set screw

Set screw. Designed to replicate an "aged" look.

Fender Telecaster / P-Bass knurled flat-top barrel knobs in chrome.

High-quality USA made knobs from Davies Molding. The 8000 series knobs are made of solid phenolic and feature a classic teardrop design. The detailed design makes these knobs a striking addition to any piece of equipment. This unique design has been used on a variety of tools and instruments. Davies 8005 (Small)

• Height: 0.78 in.
• Length: 1.05 in.
• Fits ¼" shaft with set screw

Davies 8010 (Large)

• Height: 1 in.
• Length: 1.25 in.
• Fits ¼" shaft with set screw

Black plastic control knob for both coarse and fine knurled shafts. This distinctive pointer knob is similar in style to the Davies 1550 but in a smaller size. It features an inlay line indicator. The skirt has a diameter of 0.93 inches. Fits T18 and T24 knurled pot shafts.

High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.

• Height: 0.55 in.
• Diameter: 0.45 in.
• Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K281P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer

Original Orange™ amp knob with hex set screw. Fits 6 mm diameter shaft. Black top-hat style knob with with white dot indicator.

High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.

• Height: 0.71 in.
• Diameter: 0.57 in.
• Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K281PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer

High-quality USA made knobs from Rogan Corp. These medium knobs feature a metal insert, spun aluminum inlay, and a skirt with an infilled arrow indicator. The RB-67 Series from Rogan is popularly used on Buchla 200 Series modular synthesizers and can be found on many contemporary eurorack synthesizers..

• Height: 0.77 in.
• Diameter: 1.15 in.
• Fits ¼" shaft with set screws

A variety of sizes and colors are available from the RB-67 Series. See the links below for the full selection of knobs from this series. P-K770-X Small P-K770S-X Small Skirted P-K771S-X Medium Skirted P-K772S-B Large Skirted

Original Fender® Jazz Bass knob set, black, package of 3.

Painted phenolic knobs with a set screw and brass insert. These unique knobs closely match the colorful RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. These classic knobs are painted to match the style of the original painted RCA knobs. The paint is a durable chip-resistant coating. The RCA style knobs feature an inlay indicator line. Fits ¼” (6.35mm) pot shafts.

• Height: 0.792 in. (20.1 mm)
• Diameter: 1.293 in. (33 mm)
• Fits ¼" shaft with set screw

Genuine Marshall push-on replacement knobs designed for use on Marshall amplifiers. Fits coarse knurled pot shafts.

High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.

• Height: 0.84 in.
• Diameter: 0.62 in.
• Fits T18 Knurled Shafts

For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer

High-quality USA made knobs from Davies Molding. The Davies 1700 is made of solid phenolic and has a classic style that fits nicely on any piece of equipment. The 1700 can be found on vintage radios and amplifiers, most notably the Filmosound projector amps that are popularly converted to guitar amplifiers.

• Height: 0.59 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw