Knobs
Knob - Aluminum, Matte Finish, Set Screw, Short Line, 0.5" Diameter
Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.5”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K611-X. For a brushed finish version of this knob, see P-K655X.
Colors Available:
$2.19
Knob - Aluminum, Matte Finish, Set Screw, Short Line, 0.75" Diameter
Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.75”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a smaller version of this knob, see P-K656-X. For a brushed finish version of this knob, see P-K310X.
Colors Available:
$2.25
Knob - Aluminum, Notched Tip Indicator, Set Screw, .75" Diameter
¾" dia. Knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.
Colors Available:
$2.99
Knob - Aluminum, Set Screw, Chicken Head
Solid aluminum knob with a classic chicken head design. This knob has an infilled indicator line and counterbored base to hide potentiometer nuts. Fits 0.25” (6.35mm) shafts.
Colors Available:
New!:
- Height: 0.54 in. (13.72 mm)
- Length: 1.25 in. (31.75 mm)
- Fits ¼" shaft with set screw
$3.50
Knob - Aluminum, Set Screw, Diamond Knurl, 0.496” Diameter
Anodized aluminum knob with channeled indicator line and set screw. This slim, solid aluminum knob has a diamond knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.
Colors Available:
- Height: 0.56 in.
- Diameter: 0.496 in.
- Fits ¼" shaft with set screw
$3.50
Knob - Aluminum, Set Screw, Notched Tip, 1.25" Diameter
1.25" diameter knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.
Colors Available:
$3.99
Knob - Aluminum, Set Screw, Pinched with Line, 0.75" Diameter
Solid aluminum control knob with set screw. This knob has a pinched grip and is similar in size and appearance to the Davies 1510 but with sharper angles for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.
Colors Available:
- Height: 0.575 in. (14.61 mm)
- Diameter: 0.75 in. (19.05 mm)
- Fits ¼" shaft with set screw
$1.89
Knob - Aluminum, Set Screw, Short Line, 0.495" Diameter
Anodized aluminum knob with short indicator line and set screw. This slim, solid aluminum knob has a straight knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.
Colors Available:
$1.85
Knob - Aluminum, Set Screw, Skirted w/ Line, 1.125" Diameter
Large skirted aluminum knob with indicator line and set screw. This solid aluminum knob has a 1.125 in. diameter skirt and ¾” grip that features a minimalistic style of fluting. The knob uses dual set screws to ensure no slipping once set on the pot’s shaft. Fits ¼” (6.35mm) pot shafts.
Colors Available:
$4.75
Knob - Black Control, White "V" Line
Set screw with brass insert, ¼" shaft. Measures 1.28" diameter x .71" tall.
$1.55
Knob - Black, Cap, Mini Marshall Style, Set Screw
Black with cap, shorter profile than P-K340. Measures 0.59" in height. Set screw.
Cap Colors Available:
$2.99
Knob - Black, White Line, Silver Top, Set Screw, Boss Style
Black knob with white line, silver top, set screw and brass insert. Fits ¼" shaft with set screw. These Boss style knobs come in a variety of sizes. See P-K383X for an unskirted version.
Starting at $1.50
Knob - Chicken Head, mini, high-quality, brass insert, Set Screw
High quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.
Colors Available:
Starting at $0.99
Knob - Chicken Head, Raised, set screw, brass insert
Raised plastic chickenhead knob with brass insert and set screw. 1.20" in length. Davies 2300 clone.
Colors Available:
$1.10
Knob - Chicken Head, set screw, brass inset
Colors Available:
- Fits ¼" Solid Shafts (Set Screw)
- Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
- Brass Set Screw and Insert
- High Quality Plastic
Starting at $1.30
Knob - Cliff K5, Black, Set Screw, for Marshall
Black K5 knob with gold or silver cap and long indicator line. ¼" shaft with set screw. Replacement for Marshall. Measures 0.75" in height. See P-K342-NOI for a version with no indicator line.
Cap Colors Available:
$3.45
Knob - Davies, 1470, Daka-ware, Large, Pointer
High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.
Colors Available:
- Height: 0.50 in.
- Length: 1.13 in.
- Fits ¼" shaft with set screw
Starting at $2.55
Knob - Davies, 1500, Daka-ware, Large, Stove Style
High-quality USA made knobs from Davies Molding. The large 1500 stove-style knob is made of solid phenolic and features an indicator line. The knob has a diameter of 1.125” with a .425” wide grip that runs the length of the entire knob. This classic Davies knob has been used on countless vintage electronics spanning many decades of use.
- Height: 0.56 in
- Diameter: 1.125 in.
- Fits ¼" shaft with set screw
$2.85
Knob - Davies, 1550, Daka-ware, Large, Skirted Pointer
High-quality USA made knobs from Davies Molding. The large skirted 1550 pointer knob is made of solid phenolic and features a white indicator line. The pointer has an overall length of 1.19” and the skirt’s diameter is 1.13”.
- Height: 0.625 in
- Length: 1.19 in.
- Fits ¼" shaft with set screw
$1.75
Knob - Davies, 1600 & 1610, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The small skirted 1610 knob is made of solid phenolic and features an indicator line on the 0.91” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
- Height: 0.59 in.
- Diameter: 0.91 in.
- Fits ¼" shaft with set screw
The large skirted 1600 knob is made of phenolic and features an indicator line on the 1.5” diameter skirt. This classic knob has been used on a variety of equipment and most notably on the Buchla 100 Series as well as some 200 Series modules.
- Height: 0.69 in.
- Diameter: 1.5 in.
- Fits ¼" shaft with set screw
$3.09
Knob - Davies, 1910 and 1913, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)
Davies 1913 (Large)
- Height: 0.50 in.
- Diameter: 0.75 in.
- Fits ¼" shaft with set screw
Davies 1913 (Large)
- Height: 0.625 in.
- Diameter: 1.13 in.
- Fits ¼" shaft with set screw
$2.75
Knob - Davies, 1914, Daka-ware, Medium, Scalloped Edge
High-quality USA made knobs from Davies Molding. The 1914 knob is the larger version of the classic 1900H found on countless synthesizers and pedals. This knob is made of solid phenolic and features an indicator line on the top. The knob pairs perfectly with the smaller diameter 1900 knobs such as the P-K801-BRASS-X as well as the skirted P-K234X knobs.
- Height: 0.50 in.
- Diameter: 0.75 in.
- Fits ¼" shaft with set screw
$3.55
Knob - Davies, 1919, Daka-ware, Large, Skirted Pointer
High-quality USA made knobs from Davies Molding. The large skirted 1919 pointer knob is made of solid phenolic and features an infilled indicator line. The pointer has an overall length of 1.25” and the skirt’s diameter is 1.13”. This knob shares design elements of the Davies 19xx knobs allowing for a uniform look while using a variety of knob shapes and styles.
- Height: 0.625 in
- Length: 1.25 in.
- Fits ¼" shaft with set screw
$2.95
Knob - Davies, 2150, Daka-ware, Vintage Pointer
High-quality USA made knobs from Davies Molding. This vintage-style 2150 pointer knob is made of solid phenolic and features an infilled indicator line. The detailed design has a mixture of ridges, curves and lines giving it a distinctively vintage appearance. The 2150 can be found on vintage equipment such as the Echoplex tape delay and test equipment from RCA and National Radio Company.
- Height: 0.56 in.
- Length: 1.25 in.
- Fits ¼" shaft with set screw
$3.45