Knobs

Genuine Fender® Pure Vintage Radio Amplifier Knobs. From tone and volume knobs to pickup covers, bridge covers and more, Pure Vintage knobs and covers let you cosmetically customize your instrument or amplifier like never before. These genuine replacement parts are created with period-correct personality in mind to the same specifications as early Fender parts, allowing players to give any Fender amp, guitar or bass a shot of vintage-accurate looks and tone.

• Set of six ribbed replacement amplifier control knobs with indicator lines
• Introduced on Blonde and Brown-era amplifiers
• Used on '63 Fender Tube Reverb, Vibroverb and Vibro-King® amplifiers
• Fits most 1/4" solid shaft potentiometers on vintage and modern amplifiers and guitars

Original Fender® Jazz Bass knob set, black, package of 3.

Original Fender Replacement Knobs For Strat. Push-On. Fits both coarse and fine knurled pots.

Plastic skirted knob with set screws and brass insert. This massive knob features a textured matte finish and closely matches the look of Raytheon knobs used on vintage test equipment, radios, and studio equipment. It features a painted inlay arrow indicator on the skirt. The large skirt has a diameter of 1.812 inches. Fits ¼” (6.35mm) pot shafts.

Sold individually. See P-K368X for knob caps

Genuine Fender replacement knob cap for S-1 switch, which can be retrofitted to nearly any U.S.- and Mexico-made Stratocaster manufactured from 1954-present.
Direct Replacement for P-K358X

Cupcake push-on volume and tone knobs. 0.985" diameter, 0.625" tall These knobs are just perfect for that retro effect, whether you're restoring an old Kay or Harmony guitar, or even an old Philco radio! Press fits on both fine and coarse knurled pots.

Ampeg classic knob. D shaft. Original Ampeg replacement part.

Large MXR knob with set screw for MXR pedals. Original Dunlop replacement part. Skirted knob with white line and dot indicator.

High-quality USA made knobs from Davies Molding. The 1914 knob is the larger version of the classic 1900H found on countless synthesizers and pedals. This knob is made of solid phenolic and features an indicator line on the top. The knob pairs perfectly with the smaller diameter 1900 knobs such as the P-K801-BRASS-X as well as the skirted P-K234X knobs.

• Height: 0.50 in.
• Diameter: 0.75 in.
• Fits ¼" shaft with set screw

Black pointer with white line. Fits a 3/16" knurled shafts. Push on Peavey part: 70902145

Black with grey line, Set screw Peavey part: 70902033

Genuine Dunlop / MXR knob for use with T18 knurled pot shafts. This is a smaller version of the classic MXR knob P-ECB-130. This knob is great for use on projects where a stylish knob is needed and space is limited.

Gibson style speed knob with embossed numbers. For 6mm 24 teeth knurled shaft.

Gibson style top hat knob with embossed numbers. Multiple color options available. Fits fine knurled pot shafts.

Generic white or brown vintage, priced per single knob. Set Screw. Height: ½", Top Diameter: ¾", Base Diameter: 13/16" Replacement for Fender: 099-0933-000 Multiple color options available.

Gibson style speed knob. For 24 teeth knurled shaft.

Transparent lampshade style knobs similar to the ones found on PRS guitars. The lampshade knob sits somewhere between a tophat knob and speed knob but with a unique deco design. These knobs feature 0-10 numbering and fit 6mm coarse knurl (T18) pot shafts.

• Height: 0.5 in.
• Diameter: 0.94 in.
• Fits 6mm T18 knurled pot shafts

Gibson style top hat knob. Multiple color options available. Fits fine knurled pot shafts.

Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line and a clear plastic skirt. The skirt diameter is 1 inch. Fits ¼” (6.35mm) pot shafts. For a non-skirted version see P-K398-X.

Skirted knob with dot indicator and a unique fluted grip. The Cliff K1C knob can be found on classic equipment such as the Zonk Machine fuzz pedal and most notably on the EMS Synthi synthesizers.

• Height: 15.1mm
• Diameter: 25.4mm
• Fits ¼" shaft with set screw

Plastic wing knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The grip diameter is 0.693 inches with a 1 inch clear skirt. Fits ¼” (6.35mm) pot shafts.

Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.685 inches. Fits ¼” (6.35mm) pot shafts. Note: Pair with R-VADAPT-125 to fit 0.125” potentiometer shafts. For a skirted version see P-K397-X. See P-K696 for the dual concentric knob lower.

• Fits ¼" Solid Shafts (Set Screw)
• Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
• Brass Set Screw and Insert
• High Quality Plastic