Knobs

Knob - Aluminum, Set Screw, Pinched with Line, 0.75" Diameter
Colors Available:
Solid aluminum control knob with set screw. This knob has a pinched grip and is similar in size and appearance to the Davies 1510 but with sharper angles for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.
  • Height: 0.575 in. (14.61 mm)
  • Diameter: 0.75 in. (19.05 mm)
  • Fits ¼" shaft with set screw
$1.89
Knob - Aluminum, Set Screw, Chicken Head
Colors Available:
New!:
Solid aluminum knob with a classic chicken head design. This knob has an infilled indicator line and counterbored base to hide potentiometer nuts. Fits 0.25” (6.35mm) shafts.
  • Height: 0.54 in. (13.72 mm)
  • Length: 1.25 in. (31.75 mm)
  • Fits ¼" shaft with set screw
$3.50
Knob - Davies, 1500, Daka-ware, Large, Stove Style
High-quality USA made knobs from Davies Molding. The large 1500 stove-style knob is made of solid phenolic and features an indicator line. The knob has a diameter of 1.125” with a .425” wide grip that runs the length of the entire knob. This classic Davies knob has been used on countless vintage electronics spanning many decades of use.
  • Height: 0.56 in
  • Diameter: 1.125 in.
  • Fits ¼" shaft with set screw
$2.85
Knobs - Marshall, for Amplifiers, push-on
Genuine Marshall push-on replacement knobs designed for use on Marshall amplifiers. Fits coarse knurled pot shafts.

For a similar generic knob, see P-K391.

$11.95
package of 8
Out of Stock
Knob - Black, Cap, Set Screw, Marshall Style, No Indicator
Black Marshall-style knobs with a silver cap. This is the taller 0.766” version of this knob. The silver cap has no indicator line matching those found on vintage fuzz pedals such as the Supa Fuzz, Tone Bender Professional MKII, Shatterbox, and MKIII and MKIV Tone Benders. Fits ¼" shaft pots using a slotted set screw.
  • Height: 0.766 in.
  • Top Diameter:0.594 in.
  • Bottom Diameter:0.766 in.
  • Fits ¼" shaft with set screw
$2.95
Knob - Davies, 1910 and 1913, Daka-ware, Skirted
High-quality USA made knobs from Davies Molding. The skirted 1900 series knobs are made of solid phenolic and feature an indicator line on the skirt. These classic knobs have been used on a variety of equipment throughout the decades and are still popularly used on synthesizers today. The smaller 1910 knob was used on many early Serge paperface panels. Davies 1910 (Small)
  • Height: 0.50 in.
  • Diameter: 0.75 in.
  • Fits ¼" shaft with set screw

Davies 1913 (Large)
  • Height: 0.625 in.
  • Diameter: 1.13 in.
  • Fits ¼" shaft with set screw
$2.75
Knob - Fender, Black 1-10, for Princeton 65 DSP
Original Fender Amplifier Knobs. Rotary "1-10" Numbered Style for push-on D-shaft. Silver cap. Package of 4. 7/8" D x 3/4" H.
Note: The flat is oriented to the space between 1 and 10.
$8.65
package of 4
Knob - Cliff, K5, Black, Short indicator, Set Screw, for Marshall
Black Cliff K5 knob with short indicator line. ¼" shaft with set screw. Replacement for Marshall. Measures 0.75" in height. See P-K342-NOI for a version with no indicator line.
$2.95
Knob - Pointer, Small, Knurled, 0.675” Diameter
Colors Available:
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs feature a slotted set screw, and fit ¼" solid shaft potentiometers. These are a close match to the Davies 1400.
  • Height: 0.43 in.
  • Length: 0.825 in.
  • Fits ¼" shaft with set screw
$0.69
Knob - Witch Hat, Black 1-10, Skirted, Set Screw, Thick Numbers
Sold individually. Slightly thicker numbers than P-K314-1. Made in Taiwan.
$2.25
On Backorder
Knob - Fender®, Witch Hat, Black Skirted for Blackface Amps
Fender® skirted knobs with numbers (1-10) as used on Fender® amps. Pack of 6 for 1/4" solid shaft pots.
$19.95
package of 6
Knob - Davies, 8005 & 8010, Daka-ware, Vintage Pointer
High-quality USA made knobs from Davies Molding. The 8000 series knobs are made of solid phenolic and feature a classic teardrop design. The detailed design makes these knobs a striking addition to any piece of equipment. This unique design has been used on a variety of tools and instruments. Davies 8005 (Small)
  • Height: 0.78 in.
  • Length: 1.05 in.
  • Fits ¼" shaft with set screw

Davies 8010 (Large)
  • Height: 1 in.
  • Length: 1.25 in.
  • Fits ¼" shaft with set screw
$3.95
Knob - Scalloped Edge, Indicator Line, Set Screw, Brass Insert
Colors Available:
The P-K801-BRASS is a custom built Davies 1900H clone. This knob features a brass insert in addition to a thick plastic build resulting in the most solid version of this knob available. The thick plastic eliminates the unfortunate hairline fractures that can commonly be found near the set screw of other versions. The P-K801-BRASS has an infilled painted indicator and fits ¼” (6.35mm) pot shafts.
$0.95
Knob - Fender®, Vintage "Cupcake", indicator line, set screw
Genuine Fender® Pure Vintage Radio Amplifier Knobs. From tone and volume knobs to pickup covers, bridge covers and more, Pure Vintage knobs and covers let you cosmetically customize your instrument or amplifier like never before. These genuine replacement parts are created with period-correct personality in mind to the same specifications as early Fender parts, allowing players to give any Fender amp, guitar or bass a shot of vintage-accurate looks and tone.
  • Set of six ribbed replacement amplifier control knobs with indicator lines
  • Introduced on Blonde and Brown-era amplifiers
  • Used on '63 Fender Tube Reverb, Vibroverb and Vibro-King® amplifiers
  • Fits most 1/4" solid shaft potentiometers on vintage and modern amplifiers and guitars
$19.95
package of 6
Knob - Davies, 1914, Daka-ware, Medium, Scalloped Edge
High-quality USA made knobs from Davies Molding. The 1914 knob is the larger version of the classic 1900H found on countless synthesizers and pedals. This knob is made of solid phenolic and features an indicator line on the top. The knob pairs perfectly with the smaller diameter 1900 knobs such as the P-K801-BRASS-X as well as the skirted P-K234X knobs.
  • Height: 0.50 in.
  • Diameter: 0.75 in.
  • Fits ¼" shaft with set screw
$3.55
Knob - Rogan, 155 Series, Witch Hat, Small Skirt, Indicator Line
High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay, a small skirt and an infilled indicator line. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
  • Height: 0.62 in.
  • Diameter: 0.84 in.
  • Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-2 0-10 Witch Hat P-K155-3 Large Witch Hat w/ Arrow
$2.75
Knob - Fender®, Black Chicken-Head
Original Fender chicken head knob. Black, comes in a package of six. Set screw. For 1/4" solid shaft pots.
$19.95
package of 6
Knob - Phenolic, Set Screw, Stealth Chicken Head
High quality chicken head style knob with a unique angular design. The stealth chicken head has a thin band that extends above the base allowing for easy manipulation of the knob. This solid phenolic knob has an infilled indicator line. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
  • Height: 0.7 in.
  • Length: 1.408 in.
  • Fits ¼" shaft with set screw
$1.99
Knob - Rogan, 155 Series, Witch Hat, Large, Arrow
High-quality USA made knobs from Rogan Corp. These large phenolic knobs feature a brushed aluminum inlay and a skirt with an arrow indicator. With its 1.5” skirt diameter, this knob is much larger than the standard Fender and Music Man witch hat knobs. 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
  • Height: 0.81 in.
  • Diameter: 1.50 in.
  • Fits ¼" shaft with set screw

A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-2 0-10 Witch Hat
$3.35
Knob - Black, Cap, Mini Marshall Style, Set Screw
Cap Colors Available:
Black with cap, shorter profile than P-K340. Measures 0.59" in height. Set screw.
$2.99
Knob - Phenolic, Set Screw, Retro Pointer
High quality phenolic pointer knob with a vintage design. The retro pointer has a thick band that extends above the base allowing for easy manipulation of the knob making it a great option for rotary controls and switches. This solid phenolic knob has an infilled indicator line with a decorative diamond shaped top. Fits 0.25” (6.35mm) shafts with set screw and brass insert. This knob pairs perfectly with the smaller P-K356 knob.
  • Height: 0.85 in.
  • Length: 1.63 in.
  • Fits ¼" shaft with set screw
$2.20
Knob - Davies, 1919, Daka-ware, Large, Skirted Pointer
High-quality USA made knobs from Davies Molding. The large skirted 1919 pointer knob is made of solid phenolic and features an infilled indicator line. The pointer has an overall length of 1.25” and the skirt’s diameter is 1.13”. This knob shares design elements of the Davies 19xx knobs allowing for a uniform look while using a variety of knob shapes and styles.
  • Height: 0.625 in
  • Length: 1.25 in.
  • Fits ¼" shaft with set screw
$2.95
Knob - Marshall, Brown, Gold Cap, Push-On, Single
Original Marshall, brown with gold cap, push on. 5/8" height. For 18 teeth knurled pot shafts. Used on the MG100HDFX, G100RCD, and other models. Sold individually. Note: The brown color found on the body of the knob is very subtle.
$3.95
Knob - Plastic, Set Screw, Skirted w/ Dot, 1.01" Diameter
Large black plastic control knob with set screw and brass insert. This skirted knob features a radial-brushed metal cap. The grip has large fluting with a white dot indicator on both the top of the grip and on the skirt of the knob. The style is similar to the Cosmo knobs found on many Moog synthesizers. Fits ¼” (6.35mm) pot shafts.
Starting at $1.05