Knobs
Knob - Davies, 8005 & 8010, Daka-ware, Vintage Pointer
High-quality USA made knobs from Davies Molding. The 8000 series knobs are made of solid phenolic and feature a classic teardrop design. The detailed design makes these knobs a striking addition to any piece of equipment. This unique design has been used on a variety of tools and instruments. Davies 8005 (Small)
Davies 8010 (Large)
- Height: 0.78 in.
- Length: 1.05 in.
- Fits ¼" shaft with set screw
Davies 8010 (Large)
- Height: 1 in.
- Length: 1.25 in.
- Fits ¼" shaft with set screw
$3.95
Knob - Davies, 1470, Daka-ware, Large, Pointer
High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.
Colors Available:
- Height: 0.50 in.
- Length: 1.13 in.
- Fits ¼" shaft with set screw
Starting at $2.55
Knob - Rogan, PT Series, 1P, Small, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
For a D-shaft version of this knob, see P-K281P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
- Height: 0.55 in.
- Diameter: 0.45 in.
- Fits T18 Knurled Shafts
For a D-shaft version of this knob, see P-K281P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65
Knob - Rogan, PT Series, 1PS, Small, Skirted, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
For a D-shaft version of this knob, see P-K281PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
- Height: 0.71 in.
- Diameter: 0.57 in.
- Fits T18 Knurled Shafts
For a D-shaft version of this knob, see P-K281PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K272P-W 2P Medium Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65
Knob - Rogan, PT Series, 2P, Medium, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
For a D-shaft version of this knob, see P-K282P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272PS-W 2PS Medium Skirted Pointer
- Height: 0.68 in.
- Diameter: 0.50 in.
- Fits T18 Knurled Shafts
For a D-shaft version of this knob, see P-K282P-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272PS-W 2PS Medium Skirted Pointer
$1.65
Knob - Rogan, PT Series, 2PS, Medium, Skirted, Pointer, Knurled Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm T18 knurled shafts.
For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
- Height: 0.84 in.
- Diameter: 0.62 in.
- Fits T18 Knurled Shafts
For a D-shaft version of this knob, see P-K282PS-W. A variety of different sizes are available from the PT Series. See the links below for the full selection of knurled shaft knobs from this series. P-K271P-W 1P Small Pointer P-K271PS-W 1PS Small Skirted Pointer P-K272P-W 2P Medium Pointer
$1.65
Knob - Rogan, PT Series, 1P, Small, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These small pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.
- Height: 0.55 in.
- Diameter: 0.45 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K271P-W. A variety of different sizes are available from the PT Series.
$1.65
Knob - Rogan, PT Series, 1PS, Small, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
- Height: 0.71 in.
- Diameter:0.57 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
$1.65
Knob - Rogan, PT Series, 2P, Medium, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These medium pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K272P-W. A variety of different sizes are available from the PT Series.
- Height: 0.68 in.
- Diameter: 0.50 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K272P-W. A variety of different sizes are available from the PT Series.
$1.65
Knob - Rogan, PT Series, 2PS, Medium, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These medium, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K272PS-W. A variety of different sizes are available from the PT Series.
- Height: 0.84 in.
- Diameter: 0.62 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K272PS-W. A variety of different sizes are available from the PT Series.
$1.65
Knob - Rogan, PT Series, 3PS, Large, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
A variety of different sizes are available from the PT Series.
- Height: 0.71 in
- Diameter: 0.73 in
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
A variety of different sizes are available from the PT Series.
$1.75
Knob - Rogan, PT Series, 5PS, Wide, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
A variety of different sizes are available from the PT Series.
- Height: 0.45 in.
- Diameter: 0.84 in
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
A variety of different sizes are available from the PT Series.
$1.85
Knob - Rogan, PT Series, 6PS, Extra Large, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These extra large, puck-shaped, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
A variety of different sizes are available from the PT Series.
- Height: 0.63 in.
- Diameter:1.25 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
A variety of different sizes are available from the PT Series.
$1.95
Knob - Phenolic, Set Screw, Gaunt Chicken Head
High quality chicken head knobs with vintage gaunt design. The gaunt chicken head has a thinner band that extends above the base allowing for easy manipulation of the knob. This knob has a thick infilled indicator line and is made of solid phenolic. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
- Height: 0.67 in.
- Length: 1.26 in.
- Fits ¼" shaft with set screw
$1.20
Knob - Pointer, Large, Knurled, vintage index line
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers. Davies 1470 clone.
Colors Available:
$1.10
Knob - Pointer, Small, Knurled, 0.675” Diameter
This vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs feature a slotted set screw, and fit ¼" solid shaft potentiometers. These are a close match to the Davies 1400.
Colors Available:
- Height: 0.43 in.
- Length: 0.825 in.
- Fits ¼" shaft with set screw
$0.69
Knob - Plastic, Set Screw, Neve / Marconi Style, Wing, Skirted, 1” Diameter
Plastic wing knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The grip diameter is 0.693 inches with a 1 inch clear skirt. Fits ¼” (6.35mm) pot shafts.
Colors Available:
$1.85
Knob - Chicken Head, Zonk Style, Set Screw
High quality chicken head knobs that resemble the style of knob found on the Zonk Machine II and Shatterbox fuzz pedals. The Zonk chicken head knob has a contoured center band with a textured finish. The outer dome has a shiny finish offering a visual contrast. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
Colors Available:
- Height: 0.75 in.
- Length: 1.065 in.
- Fits ¼" shaft with set screw
$0.99
Knob - Small Chicken Head, Black, Set Screw
Small black plastic chicken head knob with an off-white indicator line for a vintage look. Fits 6.35mm (1/4") potentiometer shafts.
$0.95