Luthier Parts & Tools

Nut - Bone, Oversized, 56mm x 11mm x 6.35mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
  • Measures 56 mm x 11 mm x 6.35 mm
  • Sold individually
$4.25
Nut - Bone, for Fender, 44.45mm X 3.3mm X 6.35, Flat
Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.
$3.95
Nut - Bone, for Gibson, 43mm X 5.9mm X 8mm, Flat
Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.
$5.55
Fret Wire - 18% Nickel-Silver, 2 ft lengths, Jumbo sizes
High quality 18% Nickel-Silver fret wire in jumbo sizes.
  • 2.6mm - 3.0mm Crown Widths, (0.102" - 0.118")
  • 1.0mm - 1.45mm Crown Heights, (0.039" - 0.057")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-J-1 28 PRICE P-GTFW-J-2 26 PRICE P-GTFW-J-3 25 PRICE P-GTFW-J-4 22 PRICE P-GTFW-J-5 18 PRICE P-GTFW-J-6 21 PRICE P-GTFW-J-7 19 PRICE For additional sizes and options please see:
  • Small Sizes - P-GTFW-S-X
  • Medium Sizes - P-GTFW-M-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-J-1 2.6 mm (0.102") 1.0 mm (0.039"
Starting at $4.95
Nut - Graphite, for Gibson, slotted
This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 23/32 inches (43.75mm)
  • Height #1 (fretboard side) = 5/16 inches (7.81mm)
  • Height #2 (headstock side) = 9/32 inches (7mm)
  • Thickness at bottom = 15/64 inches (6.1mm)
  • Thickness at top = 3/16 inches (4.78mm)
$4.55
Nut - Fender®, Pre-slotted, Bone, for Tele and Strat
Original Fender pre-slotted bone nut for Teles and Strats.
$15.85
Nut - Gold Tone, Zero Guide Slotted
The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only takes a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included (multiple sizes). Comparison Standard Nut Zero Glide Open String Tone Absorbs energy. Fret reflects energy, making the open strings more vibrant. Tuning Friction causes string binding. 93% less surface area. More accurate tuning. String Bend/Whammy Bar Whammy bars and string bends cause the strings to bind in the nut and not return to pitch Reduces string binding and "returns to zero" after every tug of the whammy bar or bend Durability Slots wear down over time. Minimal wear.
Starting at $24.00
Fret Wire - Stainless Steel, 2 ft lengths, various sizes
High quality stainless steel fret wire available in popular sizes. Straight 2ft lengths sold individually or by the pound. For standard 18% Nickel-Silver options please see:
  • Small Sizes - P-GTFW-S-X
  • Medium Sizes - P-GTFW-M-X
  • Jumbo Sizes - P-GTFW-J-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-STEEL-1 2.0 mm (0.079") 1.0 mm (0.039") 2.8 mm (0.110") 0.6 mm (0.024") 0.95 mm (0.037") Similar size to Dunlop 6260, Stew Mac 147, commonly used on Vintage Fender, Banjos, Pre-War Gibsons P-GTFW-STEEL-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.6 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-STEEL-3 2.7 mm (0.106") 1.4 mm (0.055") 3.2 mm (0.126")
Starting at $5.25
Nut - Graphite, for Fender, with Slots
Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.
  • Length = 1 41/64 inches (41.52mm)
  • Height #1 (fretboard side) = 13/64 inches (5.06mm)
  • Height #2 (headstock side) = 13/64 inches (5mm)
  • Thickness at bottom = 9/64 inches (3.46mm)
  • Thickness at top = 1/8 inches (3.1mm)
$4.55
Nut - Fender®, Pre-slotted, Melamine, for Tele and Strat
Original Fender pre-slotted melamine nut for Teles and Strats.
$8.45
Fret Wire - 18% Nickel-Silver, 2 ft lengths, Small sizes
High quality 18% Nickel-Silver fret wire in small sizes.
  • 2mm - 2.1mm Crown Widths, (0.079" - 0.083")
  • 0.9mm - 1.3mm Crown Heights, (0.035" - 0.051")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-S-1 38 PRICE P-GTFW-S-2 31 PRICE P-GTFW-S-3 32 PRICE P-GTFW-S-4 26 PRICE P-GTFW-S-5 35 PRICE For additional sizes and options please see:
  • Medium Sizes - P-GTFW-M-X
  • Jumbo Sizes - P-GTFW-J-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-S-1 2.0 mm (0.079") 0.9 mm (0.035") 2.5 mm (0.098") 0.5 mm (0.020") 0.83 mm (0.033")
Starting at $4.50
Locking Nut - Gotoh, for Floyd Rose Style Tremolos, Top Mount
Colors Available:
Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 1-11/16'' (43mm). Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.
Starting at $21.75
Nut - Tusq XL, Pre-slotted, Strat and Tele Style
The PQL-5000-00 is a perfect option to replace and upgrade the nut in almost all Fender style electric guitars. It will work in both a flat bottom or curved bottom nut slot due to it's ingenious design.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.687 in. (42.85mm)
  • Width - 0.128 in. (3.25mm)
  • Height - 0.198 in. (5.03mm)
  • E to E - 1.363 in. (34.62mm)
$12.71
Nut - Bone, for Acoustic, 45mm x 10mm x 4.95mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom feel and appearance.
  • Measures 45mm x 10mm x 4.95mm
  • Sold individually
$4.25
Nut - Fender®, replacement for American standard P-Bass
Fender® replacement string nut for American Standard Precision Bass
$7.25
Nut - Bone, for Acoustic, 52.5mm x 10mm x 4.95mm
High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.
  • Measures 52.5mm x 10mm x 4.95mm
  • Sold individually
$4.25
Nut - Plastic construction, for Stratocaster
Stratocaster guitar nut - plastic construction
$1.95
Nut - Plastic, for Electric Guitars
Plastic electric guitar nut.
$1.95
Fret Wire - 18% Nickel-Silver, 2 ft lengths, Medium sizes
High quality 18% Nickel-Silver fret wire in medium sizes.
  • 2.3mm - 2.4mm Crown Widths, (0.091" - 0.095")
  • 1.1mm - 1.3mm Crown Heights, (0.043" - 0.051")

Straight 2ft lengths sold individually or by the pound. For additional sizes and options please see:
  • Small Sizes - P-GTFW-S-X
  • Jumbo Sizes - P-GTFW-J-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-M-1 2.3 mm (0.091") 1.1 mm (0.043") 2.6 mm (0.102") 0.65 mm (0.026") 0.95 mm (0.037") A popular medium size for electric guitars P-GTFW-M-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.60 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-M-3
Starting at $4.75
Nut - Brass, for Fender, blank un-slotted
This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.
  • Thickness = 9/64 inches (3.47mm)
  • Flat Bottom Length = 1 11/16 inches (43 mm)
  • Height at ends = 13/64 inches (5.25mm)
  • Height at middle = 15/64 inches (6mm)
$6.50
Nut - Tusq XL, 3/16” Slab, Black, 63.5mm x 4.75mm x 11.1mm
The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16" thick slab of Black TUSQ XL.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 2.5 in. (63.5mm)
  • Width - 0.187 in. (4.75mm)
  • Height - 0.437 in. (11.1mm)
$11.60
Nut - Tusq XL, Pre-slotted, Epiphone Pre 2014
The PQL-6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install.
This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq.
Dimensions:
  • Length - 1.730 in. (43.94mm)
  • Width - 0.239 in. (6.08mm)
  • Height - 0.357 in. (9.08mm)
  • E to E - 1.344 in. (34.14mm)
  • Radius - 15 in.
$12.71
Nut - Tusq, 3/16” Slab, 63.5mm x 4.75mm x 11.1mm
The PQ-4187-00 is a 3/16" thick block or slab of pure TUSQ. It can be used to make a nut, small saddle or just about anything you can imagine.
Dimensions:
  • Length - 2.5 in. (63.5mm)
  • Width - 0.187 in. (4.75mm)
  • Height - 0.437 in. (11.1mm)
$11.60
Nut - Original Fender, Pre-Slotted Brass, for Strat / Tele
High-quality solid-brass string nut as used on the Yngwie Malmsteen Stratocaster®, for use with Stratocaster and Telecaster® guitars. Designed for 9.5"-radius fingerboards and pre-slotted with string location grooves to simplify spacing and positioning during final slot filing. Note that some filing and shaping modifications may be required to ensure proper fit and performance. • High-quality solid-brass string nut • For 9.5" fingerboard radius • Pre-slotted • 9.5" (241mm) top and bottom radius • 1.620” (41.15mm) wide
$14.95