Luthier Parts & Tools

If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.

A tremolo-unit includes the following accessories. Arm, spring, spring-holder, wrench, stud-bolt, screws. U.S.A. threads screws. String spacing:

• 56mm from low E string to high E string
• 11.2mm between each string

Two piece rosewood bridge with metal saddle. Adjustable style. 6” wide. For 6 or 12-string guitars with a tailpiece.

Made in U.S. vintage spec ABR-1 bridge with no retaining wire and nylon saddles. Hardware sold separately. See P-GKLU-KLP1273N for a complete set. The bridge uses string tension along with the set screws to secure the nylon saddles onto the bridge.

• Post spacing: 2.93 inches (74.5mm)
• Radius: 12 inches (30.48cm)
• String Spacing: 10.4 mm

Original Fender® Stratocaster tremolo arm (also known as "whammy bar"). Includes one tremolo arm with a white and an aged tremolo knob.
Fits most American Series and American Standard (USA) instruments manufactured from '86-Present. Tremolo arm threading is the same as American Vintage models.

Genuine Fender synchronized bridge assembly for USA made Deluxe/ Ultra Stratocasters manufactured after 1986. This assembly is also used on the Elite series Stratocasters and an assortment of vintage-style and modern models. Also an upgrade for American Standard Stratocasters. Kit includes the following:

• 1 × Steel block
• 1 × Pop-in tremolo arm
• 6 × Block style saddles with offset intonation screws
• 2 × Pivot pins
• 2 × Pivot pin bushings
• 5 × Tremolo springs
• 1 × Tremolo claw
• 1 × String Tree

Fender part number: 007-7092-049

Gotoh 510TS Series Tremolos are machined with Chrome Molybdeumn Steel knife edges to withstand years of abuse and trouble free use. Comes stock with a vintage steel block with more mass and better tone. These are top of the line Gotoh tremolo units. Tremolo-unit includes the following accessories: Arm, Spring, Spring-holder, Wrench, Stud-bolt, Screw etc… Hardware included.

Gotoh's unique grooving on the “In-Tune” saddles results in more exact intonation compared to traditional vintage-style saddles. Each saddle is reversible and can be used in any position. Titanium construction is used for rich harmonic overtones and long sustain. The brass saddles create a bright sound. 10.8mm string spacing

Made in U.S. Vintage spec ABR-1 bridge. Non-wired. Hardware included.
ABR-1 bridge with nylon saddles. True to specs like the original with no retaining wire. The saddles are held in place with a combination of string tension and the intonation screw end fitting into the frame. Adjustable in height with thumbwheels and threaded rod that uses no body inserts just like the originals!

The PQ-9280-C0 is a great option to replace or upgrade the saddle on your acoustic guitar. It is our most popular saddle and will work with many other guitars. It is 1/8" thick and is compensated to help improve the playability of your guitar. Dimensions:

• Length - 2.88 in. (73.15mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.43 in. (10.92mm)

Original Fender® Tremolo arm for Vintage '62 Jaguar/Jazzmaster.
Features:

• Chrome tremolo arm
• Arm tip not included
• For American Vintage series Jaguar and Jazzmaster models (1998-present)

A modern version of the Tune-o-matic style bridge for guitars. Pre-notched titanium saddles with an individual saddle intonation screw retained by mini hex nuts for each saddle. Standard mounting post style. Hardware included.

Stud Mount Adjustable Bridge, Hardware, 2-1/16" String, 3-¼" Stud. Hardware included.

Genuine Fender replacement chrome bridge assembly for use with most Standard series Telecaster models manufactured from 2004-present (does not retrofit to a three-screw mounting design without modification). Bridge pickup and mounting hardware not included.

• Chrome bridge assembly
• Six adjustable block saddles
• Four-screw mounting design
• Mounting hardware not included
• For Standard Series Telecaster models (2004-present)

Made in U.S. vintage spec ABR-1 bridge made to the same specifications as the original 1950s version. Wired. Hardware included.
The bridge features the vintage-style retaining wire that secures the brass saddles and intonation screws onto the bridge. The spacing and mounting hardware also match the original spec of this bridge with threaded posts that mount directly to the body and thumbwheels for height adjustments.

The PQ-9000-00 is a blank TUSQ acoustic saddle with a slight radius on top. It is a great option for someone who wants to custom shape a new saddle. A lot of the work is already done for you.
Dimensions:

• Length - 3.02 in. (76.72mm)
• Width - 0.124 in. (3.16mm)
• Height - 0.45 in. (11.42mm)

Original Fender® set of two threaded steel bridge-pivot screws used to mount two-point synchronous tremolo systems on American, Ultra, and American Standard Stratocaster® models (and some Custom Shop Stratocaster models) manufactured from 1986-present.
Features:

• Set of two threaded steel bridge-pivot mounting screws
• For American, Ultra, American Standard and some Custom Shop Stratocaster models (1986-present).

This bridge features an artistic acanthus flower engraving that adds a custom look to Telecaster guitars. Designed for use with a Telecaster® single coil pickup, this bridge includes six adjustable chrome-plated brass saddles, and features a string-through design. The Gotoh Luxury-Mode series includes stylized parts made with an ultra fine, high-speed carving technology. These parts are replacements that can enhance the appearance of any guitar. Four mounting screws and a hex key for the saddle adjustments are included with this bridge plate.

Genuine replacement arm for the Wilkinson/Gotoh VS-100N Tremolo. Internally threaded, sturdy knobless .216"-diameter (5.5mm) stainless steel; extends approximately 5-⅝" (142.88mm). Sturdy VS-100N tremolo arm. Multiple color options available.

The Vibramate Mini Super Grip is custom made specifically to fit the arm of locking tremolo systems (like Floyd Rose). The textured design adds contour to the overall grip and a soft comfortable feel for subtle vibrato techniques. The Vibramate Super Grip easily slides onto your existing tremolo arm without any modifications or special tools. The tapered design ensures a snug fit once installed but can be removed just as easily by sliding it back off. Made in USA.

Bridge A modern version of the Tune-o-matic style bridge for the solidbody guitar. Pre-notched saddles with an individual saddle intonation screw retained by mini hex nuts for each one. Standard mounting post style and features hard zinc saddles. Hardware included.

U.S. made replacement retaining wire for wired ABR-1 bridges. Made of high quality spring steel. Fits our U.S. made bridges as well as Gibson spec bridges.

Genuine Fender® set of six plated steel bridge saddles with offset intonation screws, for use on American and American Standard series guitars manufactured from 1986-2007. Intonation springs and mounting hardware included.
Features:

• Set of six plated steel bridge saddles with offset intonation screws
• Intonation springs and mounting hardware included
• For American and American Standard series guitars (1986-2007)

Brass saddle version of the EV510T series tremolo bridge featuring Gotoh’s patented stud lock system and FST block. Gotoh 510T Series Tremolos are machined with Chrome Molybdenum Steel knife edges to withstand years of abuse and trouble free use. The tremolo block is designed to allow the strings to contact the saddle without touching the block as it passes through which increases sustain and tuning stability. Studs, anchors, claw with screws, springs, arm, and hex keys for adjustments are all included with this tremolo. Gotoh's original FST feature (PAT.) is located between the saddle and ball end. The large channel keeps the strings from touching the plate. This feature improves the tremoloʼs ability to return to the tuned position after using the tremolo arm.