Luthier Parts & Tools

Replacement chrome tailpiece for Les Paul style guitars and others. M8 * 12.5 thread studs (anchor bushings included). Made in Korea.

Vibramate Standard V5 Adapter Mounting Kit, For Bigsby B5, Aluminum Now you can install a Bigsby Vibrato on your guitar without drilling any holes!

Kent Armstrong “Slimbucker” jazz pickup with slim profile (3/8" thick), side-mount configuration. Made in the style of Gibson’s early 1960’s Johnny Smith guitars with floating mini-humbucker pickups, this jazz pickup is perfect for use with traditional arch-top electric guitars. Its non-invasive mounting capabilities keep the guitar’s acoustic properties uninhibited.

High quality potentiometers from AxLabs. These linear taper pots feature a ¼” bushing and a ¼” (6.35mm) solid shaft. The dish back style matches the construction of many vintage guitars. Unlike any other potentiometers on the market, AxLabs pots were specifically designed for electric guitars, utilizing years of painstaking attention to detail in the industry. AxLabs potentiometers feature machined brass shaft sleeves and are lubricated with 3 different types of grease used in specific areas of the moving parts for ultra-smooth rotation. Shafts are then reinforced with a retainer ring positio­ned for strength and to reduce friction.

Precision Music Technologies V-Treb with 500KA CTS pot – Variable Treble Bleed Bypass Circuit. Made in USA. The V-Treb variable treble bleed/bypass circuit corrects the problem of high frequency losses at reduced volumes by allowing the player to control how bright or warm the tone will get as the volume control is reduced. Pot: 24 mm body diameter, ¼” knurled split shaft. Bushing diameter = 3/8”, Bushing Length = 3/4”. PCB dimentions: 1.06” x 0.46” x 0.07”

Everything you need to properly clean and maintain your guitar’s fingerboard, finish, and strings! The Dunlop System 65 Guitar Tech Kit will help you keep your guitar feeling great and shining like a new nickel. Set includes the following:

• Formula No. 65 cleaner/polish shines up your guitar’s body while eliminating any built up grime.
• Fretboard 65 Ultimate Lemon Oil cleans and conditions your fretboard to protect against drying and cracking.
• Ultraglide 65 String Cleaner/Conditioner cleans your strings and extends string life while eliminating string squeaks.
• Also includes 2 microfiber cleaning cloths, a micro fine fret polishing cloth, and a string winder

Step up and give that grimy guitar a fresh start!

Genuine Gretsch® screws for mounting Gretsch pickup rings to the guitar's body. These chrome oval-head wood screws come in a pack of 12.
Accessory to P-PUGRETMR-S

High quality made in Japan spoon-shaped gouges for luthier work. These gouges have a hardness of HRC64 and a total length of 180mm. The hardwood handle features a flat end for hammering and a decorative handle. The blade material is Shiragami white steel.

This kit consists of the precision router base for Dremel tools along with the routing jig for soundhole & rosette. Kit includes:

• S-T235
• S-T256

The precision router base is a stable and versatile way to support your Dremel tool. This base is the best way to hold a Dremel for freehand routing, inlaying, widening fret slots, and more. Made of brass, aluminum and machined steel, it features precision cutting depth adjustment with large thumbwheels to eliminate guesswork.

• Excellent control
• Easy installation
• Accurate freehand routing

Operation information for the precision router base: To install - simply unscrew the threaded collar on the nose of the Dremel and screw the Dremel directly into the Precision Router Base. Each turn of the large knurled thumbwheels adjusts your Dremel's cutting depth by .035"" (.889mm).

CP files have special file tooth pattern and it keeps file clean without clogging. Easy to control and fast to file clean with light strokes.

75 x 150mm diamond self-adhesive sheets, for S-T229-X sanding blocks.

Original, made in USA, 10-hole keeper bar for 50mm spacing. The keeper bar is designed for use with soapbar P-90 pickups. The spare holes are for the pickup mounting screws. This premium keeper bar is made of raw steel.

Gold anodized aluminum Telecaster style pickguard with 8 mounting holes. This pickguard has two pickup mounting holes for use with neck pickups that mount directly to the pickguard. All pickguard mounting holes are countersunk and the pickup mounting holes are flat.

Genuine Bigsby® conventional Telecaster bridge for use with Bigsby vibrato. This is the stock bridge assembly used in B16 vibratos.
2 13/16” stud spacing.

Genuine Bigby bridge for Guild Special Archtop guitars. This bridge has a 2-1/16" string spacing with a 3” stud spacing.

Genuine Bigsby® flat handle assembly for use with Bigsby vibrato units. The is the stock handle assembly to the Kalamazoo series vibratos. This unit attaches to vibratos using the included set screw.

Bigsby long B6-style hinge plate.

Designed for use on thin hollow body and semi-hollowbody guitars. Bigsby B30 Specifications

• Model Name: B-30
• Series: Licensed Line
• Manufacturing Method: Die Cast
• Manufacturing Material: Aluminum
• Approximate weight: 296 grams/10.4 oz.
• Overall Length: 7 ½"/190.5 mm
• Overall Width: 3 ¾"/95.3 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

The Gotoh GTC101 is a fixed bridge for hard tail guitars such as Strat® style guitars with through-body string mounting. The bridge includes plated brass saddles for a warmer tone and features a 52.5mm string spacing. Saddle intonation and height can be individually adjusted with the included hex wrench. Mounting screws included.

High quality SD90 tuners from Gotoh with brass posts and internal washers. Brass posts were used by Gibson® until 1975 and by Fender® until 1966. Unlike the common steel components, brass string posts and internal washers improve vibration transmission, resulting in a sound that is similar to the original vintage tuning machines. This 3-per-side metal oval button tuner set includes all bushings and mounting screws.

Precision 20:1 gear ratio enclosed Bass Guitar tuners. With a 7/16"-diameter string posts and threaded hex bushings. They require a 9/16"-diameter peghole for installation. Featuring sealed lubricated, cast housings and metal knobs. Mounting screws are included. Mounting hardware included. For 5-string bass. 2 Left, 3 Right.

This bridge features an artistic acanthus flower engraving that adds a custom look to Telecaster guitars. Designed for use with a Telecaster® single coil pickup, this bridge includes six adjustable chrome-plated brass saddles, and features a string-through design. The Gotoh Luxury-Mode series includes stylized parts made with an ultra fine, high-speed carving technology. These parts are replacements that can enhance the appearance of any guitar. Four mounting screws and a hex key for the saddle adjustments are included with this bridge plate.

Finding the right aftermarket tuners that match up with your guitar's mounting hole pattern can be a guessing game and if your new tuners don't match, you're stuck drilling new holes, filling the old holes and screwing in the new tuners. That's why Hipshot made the UMP™ (Universal Mount Plate). The UMP™ is a patent pending adapter plate that fits between your Hipshot tuners and the headstock of your guitar. Tabs on the face of the plate prevent the tuners from slipping against the headstock. At the same time, reach nuts inserted through the existing headstock holes into the tuners keep the whole assembly securely in place.

U.S. made quality .781 in. (short) stoptail studs in standard threading. Five step plating process for extra durability. Set of 2. This standard stop bar tailpiece stud made from brass works with US threaded bushings. Inserts sold separately.