Luthier Parts & Tools

Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.

• 0.354" bushing length
• 2 Position On-On
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)

Adapter bushings to retrofit US 1/4 inch post Kluson tuners in a headstock drilled for modern die cast tuners. Nickel plating. Set of 6. These Kluson® steel replacement - adapter bushings are intended for use in converting a modern 10mm drilled headstock to accept a vintage Kluson stamped steel tuning machines with the original US 1/4 inch string post diameter. Many repair shops use these to convert a vintage instrument back to original peg head specs

Genuine Carling DPDT 3-position mini toggle switch with solder lugs. These switches feature a flattened actuator.

• 0.354" bushing length
• 3-Position
• ¼" chassis hole diameter
• DPDT ( Double Pole/ Double Throw) switch
• Solder Lugs

Gotoh’s Telecaster bridge has the vintage look and mounting layout with a few modern additions: The In-Tune saddles give you the vintage look with unique grooves cast into the saddle to move the contact point of each string for more accurate intonation. Each saddle is reversible and can be used in any position. This gives you a huge advantage over traditional barrel style saddles that were never designed with precision intonation in mind. The brass saddles will give you that bright Tele twang! The stamped steel base plate’s cut down sides give you the unrestricted string access that many modern players prefer.

Original, made in USA, #2 x ½” wood screws. These premium screws are made of raw brass and are perfect for mounting bobbins to baseplates. These are reproductions of the PAF style mounting screws.

These super tuners are recognized as such around the world. The SG381 feature a 16:1 gear ratio and has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing---they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These come with a Schaller-style head and are perfect for your six-in-a-line setup. Mounting hardware included.

1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.

Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On

Gold Gibson style top hat knobs with gold caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.

Mini Carbon Element, Push Pull Switch, Dual Audio, Solid Shaft. 17 mm body diameter. 1/4" watt, 300° rotation. DPDT, 6mm shaft diameter. Solder lugs. 3/8" bushing. Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch. Used for Split-Coil Pickup Switching Electric guitar manufacturing is a multi-billion dollar industry with major manufacturers established worldwide. From the introduction of the first mass-produced electric guitar in 1950, guitarists have been mesmerized with advances in technology and the wide array of after- market parts commercially available for guitar upgrades. Specialty products such as Bourns® Model PDB183-GTR21 Guitar Potentiometer with Push-Pull Switch allow the guitarist multiple functions utilizing a single control such as split-coil switching for humbucking (double-pole) pickups or stacked single-coil pickups, active electronics activation, and pickup phase switching.

Genuine Fender®. Package of 12 pieces of rubber tubing for pickup mounting on most Fender instruments with pickguard-mount pickups.

Original Fender pickguard screws. Set of 24 Phillips head screws (4x1/2") for pickguard and control plate mounting on most Fender instruments.

Genuine replacement arm for the Wilkinson/Gotoh VS-100N Tremolo. Internally threaded, sturdy knobless .216"-diameter (5.5mm) stainless steel; extends approximately 5-⅝" (142.88mm). Sturdy VS-100N tremolo arm. Multiple color options available.

Dual MN taper blend-balance with center detent. Solid shaft. 17 mm body diameter. ¼ watt, 300° rotation. 6mm shaft diameter. Solder lugs. 3/8" bushing.

Grover Strap Locks feature the 'quick release' mechanism players want and need. This strong, yet lightweight accessory provides security along with the ability to easily remove the strap for use on another instrument or storage.

These super tuners are recognized as such around the world. The SG381 feature a 16:1 gear ratio and has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing---they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These come with a metal schaller style button and are perfect for your three-on-a-side setup. Mounting hardware included.

Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.

Gotoh’s JCB-2 jackplate is a curved football style plate for guitars and basses with edge mounted jacks. This high quality jack plate comes with two matching screws.

Get accurate string spacing without the use of complicated tools with this easy-to-use String Spacing Ruler. "Mark outer string locations with pencil lines (high and low E strings on guitars), usually about 1/8" in from fingerboard edges. Turn ruler over (use marked side). With wide spacing toward bass side, narrow spacing toward treble side, find group of marks (six for guitar) which best fit your two pencil lines. Use a razor knife or thin mechanical pencil to mark the string positions through the ruler's slots.

Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.

Designed to for use with the Telecaster® single coil pickup; this heavier brass bridge plate features six allen-adjustable brass saddles. Strings mount through the guitar body and all of the mounting screws are included. Hardware included.

Fits .237" solid shaft pots. Set screw, .75" diameter, .73" height. Fits on Bourns miniature solid shaft pots.

These parts are born from GOTOH's latest, state of the art manufacturing processes. In order to breathe life into these parts and build the finest machine heads in the world, they are exquisitely finished by skilled artisians, with absolutely no compromise. The work of craftsmen on each individual part has gained the classic machine heads of the 35G series, critical acclaim and trustworthiness in the eyes of musicians all over the world. These feature a 14:1 gear ratio for great tuning stability. Mounted 3-per-plate, 2 plates. Mounting hardware included.

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 5 position super switch with knob and mounting hardware.