Luthier Parts & Tools

Genuine Fender® chrome bridge cover plate for vintage style Telecaster bridges. This cover is made of stamped steel and finished with chrome just like the originals from the 1950s were made. These will fit most standard spec, three saddle, ashtray type bridges.
Features:

• Genuine Fender plated-steel bridge cover
• Introduced on 1950 Esquire® guitar
• Fits most left- or right-handed Telecaster guitars equipped with a vintage-style three-saddle bridge

Set of 6 Ratio InvisoMatch standard installation plates, designed for easy installation of Ratio Calibrated Machine Heads. These have the modern Fender style two-pin mounting system (slightly larger than the Ratio two-pin mount). Use your guitar's existing mounting holes for a fast, perfect Ratio Installation.

High quality vintage-style locking tuners from Gotoh.

Direct replacement for most Fender P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included.

Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.

Alnico 5 rod magnets with a .187” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for vintage Strat style pickups and many others.

Genuine Fender® pre-slotted melamine nut for Telecaster and Stratocaster guitars. This nut has 9 1/2 in. top radius and 7 1/4" bottom radius with an overall length of 1.695 in.

Gretsch® Original Filtertron Pickup Ring, for bridge or neck.

U.S. made threaded posts for ABR-1 bridges. The brass posts feature a high quality plating and a #6-32 threading. Each post is 1 1/16” in length. This vintage style of post is meant to mount directly to the body of the guitar.

Fender offers a wide selection of Pure Vintage electronics to players looking to restore or upgrade their guitar or amplifier with classic Fender in mind. From potentiometers to select capacitors, tube sockets and more, these electronics are created to closely replicate original-era Fender parts and have been used on a number of Fender reissue instruments and amplifiers, including our American Vintage series of guitars and basses.

Rubber caps / switch tips for mini toggle switches in a variety of colors. These are made for short sized toggle bats. Available in 11 different colors. See P-HTCAP-X for standard-length caps.

Get rid of the gunk! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand! Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use.

• 4 oz. spray bottle
• Polishes and protects
• Will not build up

Replacement bushings for Gibson® headstocks with 8.85mm outside diameter and 6.35mm inside diameter These Kluson® replacement push-in bushings are designed to appear like current Gibson® production with the more rounded flange. Same mounting specs as the bushings that accompany the current Kluson® production tuning machines so they will easily replace similar bushings with the same spec requirements

A smaller version of the regular size ROTO-GRIP® lockers for the in line and smaller headstocks or for those who prefer a lighter feel.

Original, made in USA, covers for mini humbucker pickups. These premium humbucker covers are made of nickel silver and have a 50mm spacing.

Edge cut nut files in popular gauges specially designed for slotting nuts. These files cut a smooth, round bottom slot. Also great for slotting tune-o-matic bridge saddles! Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.

• 4.5” cutting edge
• Double sided (both sides are the same gauge)
• 10 gauges available
• Sold individually*
• Made In Japan

*See S-T213-SET for a set of all 10 sizes.

This modern cupstyle Tele® jackplate is milled from brass and has a shiny plated finish. Mounts with (2) screws that are included. No more having to deal with that sharp piece of steel used to secure the old original cups. Super easy to install! The cup is even threaded so no need for the lockwasher and nut from the jack. Just simply screw the jack into the cup, solder the wires and install into your instrument!

Original Fender® black thumb rest replacement for Precision and Jazz Bass. Mounting hardware included.

Vintage style diagonal mount tuning machine set featuring a solid metal Schaller-style knob and are finished in chrome. These stamped tuners feature a classic diamond shaped back cover that can be removed for a more traditional look. The gear ratio is 15:1. All mounting hardware is included in this six in a line tuner set.

Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs

• DPDT ( Double Pole/ Double Throw) switch
• 0.354" bushing length
• 0.409” bat length
• ¼" chassis hole diameter
• Solder terminals

These parts are born from GOTOH's latest, state of the art manufacturing processes. In order to breathe life into these parts and build the finest machine heads in the world, they are exquisitely finished by skilled artisians, with absolutely no compromise. The work of craftsmen on each individual part has gained the classic machine heads of the 35G series, critical acclaim and trustworthiness in the eyes of musicians all over the world. These feature a 14:1 gear ratio for great tuning stability. Mounted 3-per-plate, 2 plates. Mounting hardware included.

Genuine Fender® set of six nickel-plated chrome bridge saddles for use on American Vintage series Stratocaster models manufactured from 1986-present. Centered intonation screws, intonation springs and saddle-height adjustment screws included. Features:

• Set of six nickel-plated chrome bridge saddles
• Centered intonation screws, intonation springs and saddle-height adjustment screws included
• For American Vintage Stratocaster models (1986-2012)

Replacement pickguard for Fender® '62 Strat® models. These pickguards have eleven mounting holes with one of the holes centered between the middle and neck pickups for compatibility with most American, Japanese, and Mexican '62 Stratocasters®.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 5 magnets, bobbins, poll screws, slug screws, baseplate, and coil lead wires.