Luthier Parts & Tools

50V ceramic capacitors with 5mm footprints for use in amplifiers, stomp boxes, and any other electronic project. These capacitors are small and should easily fit in any sized project. These also feature 1” lead lengths so they work great for point to point wiring.

Original, made in USA, #2 x ½” wood screws. These premium screws are made of raw brass and are perfect for mounting bobbins to baseplates. These are reproductions of the PAF style mounting screws.

Ceramic disc capacitors rated for up to 2kV, ± 10% tolerance.

Original, made in USA, 3-48 x 1-¼” machine screws. These premium screws are perfect for mounting humbucker pickups.

Original, made in USA, #3 x 1-3/8” wood screws. These premium screws are nickel plated and are perfect for pickups that are directly mounted to the guitar body such as P-90 and Thunderbird pickups.

Original, made in USA, 3-48 x 1” machine screws. These premium screws are perfect for mounting humbucker pickups that need a shorter screw.

Rubber caps for mini toggle switches in a variety of colors. These are made for standard sized toggle bats.

Original, made in USA, steel slugs for making humbucker pickups. These premium slugs are made of 1215 steel. These parts are made using the same materials and processes as the most sought after vintage parts.

Genuine Carling Technologies dress nuts for use with Carling mini toggle switches. These plated dress nuts feature a chamfered edge for a professional look and work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.

20 AWG fiberglass sleeving is varnished and closely resembles early style spaghetti. 11 AWG also available as part number S-M401W. Minimum order is 10 feet.
This product has a Class F electrical insulation, manufactured by impregnating and coating a finely braided fiberglass sleeving with a dielectric film of acrylic resin.

Alnico 5 rod magnets with a .187” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for vintage Strat style pickups and many others.

Original, made in USA, fillister head screws for use as polepieces in pickups. These premium polepieces have a 5-40 threading with a 0.75” length.

High quality USA made Gavitt. This wire features an outer waxed cotton braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning with a soldering iron is required for use. Sold by the foot.

Sold individually. Vintage 90 degree blunt tip pointer washer made from steel. This is a replacement for instruments requiring the vintage correct appearance of the pointer washer under the knobs.

High quality USA made Gavitt wire. This wire features an external braided shield covering a waxed black cotton cloth braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning on the inner wire is required for use. Sold by the foot.

High quality USA made steel anchor bushings available in long or short lengths with a coarse or fine knurl for a variety of stop tailpiece uses. These bushings fit 5/16 – 24 US Threaded studs. Studs sold separately.

Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.

Genuine Bigsby® replacement vibrato handle washer.

2 pole open 1/4" jack, 2 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs

Genuine Bigsby® replacement washer for tremolo units. This white plastic washer sits beneath the spring in the cup located on the frame. These washers reduce noise and potential damage to the spring and cup.

U.S. made threaded posts for ABR-1 bridges. The brass posts feature a high quality plating and a #6-32 threading. Each post is 1 1/16” in length. This vintage style of post is meant to mount directly to the body of the guitar.

3 pole open 1/4" jack, 3 contacts, with washer and nut, panel thickness 3.5 mm, with 0.205" faston tabs

Original Switchcraft Copper Alloy Knurled Locknut (Nickel Plated)
Outside Diameter:5/8"
Inside diameter threading:15/32"
Width: 3/32"

Standard size slide switches, cadmium plated solder connections. 0.3A 125V, DPDT. Good for Fender® bright switch. Can be used as a 'bright' switch on Fenders. Screws not included.