Luthier Parts & Tools

Tremolo springs - Replacement for Fender Style Tremolos
Tremolo tension springs. Similar to P-GTSPRN-5 but generic manufacture.
Starting at $1.15
Threaded Post - #6-32 x 1 1/16”, Plated Brass, USA
Package of 2
Colors Available:
U.S. made threaded posts for ABR-1 bridges. The brass posts feature a high quality plating and a #6-32 threading. Each post is 1 1/16” in length. This vintage style of post is meant to mount directly to the body of the guitar.
$1.25
Retaining Wire - For Wired ABR-1, USA
U.S. made replacement retaining wire for wired ABR-1 bridges. Made of high quality spring steel. Fits our U.S. made bridges as well as Gibson spec bridges.
$1.75
Thumbwheel - ABR-1 Style, Plated Steel, USA
Package of 2
Colors Available:
U.S. made vintage style ABR-1 thumbwheels. These steel thumbwheels feature high quality plating and are tapped for 6-32 threaded posts.
Starting at $1.95
Screws - Original Fender, Vintage Style Strat Bridge Mounting
Package of 12
Genuine Fender® vintage-style Strat bridge mounting screws. Some of Fender’s most requested replacement screws. Made for Fender® and used on a variety of vintage and contemporary models.
  • Set of 12 replacement screws
  • Genuine vintage specifications
  • Nickel plating
  • Phillips oval-head (6-32 x 7/16")
  • Used on American Vintage Stratocaster® guitars
$3.25
Tremolo arm tip - Fender®, for capping tremolo arms
Package of 2
Colors Available:
Get better leverage and grip on your whammy bar by replacing the plastic tip, package of two.
$3.55
Bridge Pin Set - Original Fender, for acoustic
Package of 7
Colors Available:
Set of seven slotted bridge pins for use with most Fender acoustic guitars as well as other manufacturers. Includes extra bridge pin and matching strap end pin.
$4.25
Anchor Bushings - Fender® Bridge Pivot Screw Inserts
Package of 2
Original Fender® inserts for American Standard Tremolo, set of 2.
$4.35
Tremolo arm - for Vintage Stratocaster
Tremolo Arm, Screw-Down, Steel 5mm-0.8p
  • Material: Steel 5mm
  • Handle Type: Screw-down
  • Thread: M5.0 - 0.8p
  • Plating: Chrome
  • Tip: White
$4.50
Screws - Fender®, Saddle Height Screws
Package of 12
Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.
  • Set of 12 hex set screws
  • For American Vintage Stratocaster and Telecaster guitars
  • Comes with four 4-40 x 3/8" hex screws and eight 4-40 x 5/16" hex screws.
$4.95
Bridge Saddle - Bone, Acoustic, Oversized, 83mm x 12mm x 6mm
High quality bone saddle blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance. Measures 83 mm x 12 mm x 6 mm. Sold individually.
$6.95
Tremolo Springs - Fender®, American Series
Package of 12
This spring helps set your tremolo arm in a fixed position when used with any Fender® American series or American Standard series tremolo. Simply insert spring into tremolo arm receptacle prior to installing tremolo arm. Package includes twelve tension springs. Used in Custom Shop, American Series, American Vintage, American Standard (USA), and Classic, Deluxe, and Road Worn® Series (Mexico) instruments.
$6.95
Bridge Post - For Nashville Bridges, Plated Brass, USA
Package of 2
Colors Available:
U.S. made bridge posts for Nashville style bridges. These bridge posts are made of solid brass and are finished with a high quality plating. Matching anchors are included. Note: These posts have 4.95mm diameters. Check your bridge for compatibility.
Starting at $7.25
Tremolo Arm - Fender®, Mexican Standard
Colors Available:
With white tip, for Mexican Standard Strat.
Starting at $7.79
Anchor - Fender®, for American standard tremolo, set of 2
Package of 2
Original Fender® anchors for American Standard Tremolo, set of 2.
$7.95
Tremolo Stopper - Brass Block, Hex Screw, Allen Key
Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)
$8.50
Vibramate - Mini Grip for Floyd Rose Style Locking Tremolos
The Vibramate Mini Super Grip is custom made specifically to fit the arm of locking tremolo systems (like Floyd Rose). The textured design adds contour to the overall grip and a soft comfortable feel for subtle vibrato techniques. The Vibramate Super Grip easily slides onto your existing tremolo arm without any modifications or special tools. The tapered design ensures a snug fit once installed but can be removed just as easily by sliding it back off. Made in USA.
$8.95
Tremolo Arm - Wilkinson by Gotoh VS-100N
Colors Available:
Genuine replacement arm for the Wilkinson/Gotoh VS-100N Tremolo. Internally threaded, sturdy knobless .216"-diameter (5.5mm) stainless steel; extends approximately 5-⅝" (142.88mm). Sturdy VS-100N tremolo arm. Multiple color options available.
Starting at $9.00
Tremolo Arm - Gotoh, B2, for GE101TS, chrome
Genuine Gotoh replacement tremolo arm for GE101TS
  • Chrome with black tip
  • #10-32 thread
$9.00
Tremolo Springs - Fender®, Tension, Package of 5
Package of 5
Set of five Stratocaster® tremolo tension springs for use on American Vintage series and Custom Shop instruments.
  • Set of five nickel-plated steel tremolo tension springs
  • For American Vintage series and Custom Shop instruments
$9.45
Tremolo arm - Fender®, for American Stratocaster
Original Fender® Stratocaster tremolo arm (also known as "whammy bar")
$10.75
Saddle - Tusq, Acoustic, Martin Style, 3/32”
The PQ-9100-00 is a great option to upgrade or replace the saddle on your Martin acoustic guitar. It is pre-shaped for a quick and simple install.
Dimensions:
  • Length - 2.908 in. (73.87mm)
  • Width - 0.100 in. (2.56mm)
  • Height - 0.383 in. (9.73mm)
$11.60
Saddle - Tusq, Acoustic, Taylor Style, Compensated, ⅛”
The PQ-9200-C0 is a great option to replace or upgrade the saddle on your Taylor acoustic as well as many other popular guitars. It is compensated to help improve the playability of your guitar.
Dimensions:
  • Length - 2.8 in. (71.12mm)
  • Width - 0.22 in. (3.1mm)
  • Height - 0.392 in. (9.99mm)
$11.60
Saddle - Tusq, Acoustic, Compensated
The PQ-9280-C0 is a great option to replace or upgrade the saddle on your acoustic guitar. It is our most popular saddle and will work with many other guitars. It is 1/8" thick and is compensated to help improve the playability of your guitar. Dimensions:
  • Length - 2.88 in. (73.15mm)
  • Width - 0.128 in. (3.25mm)
  • Height - 0.43 in. (10.92mm)
$11.60