Luthier Parts & Tools

Plastic electric guitar nut.

Stratocaster guitar nut - plastic construction

Bone nut for Fender® , 44.45mm x 3.3mm x 6.35mm at highest point with flat bottom.

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom feel and appearance.

• Measures 45mm x 10mm x 4.95mm
• Sold individually

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.

• Measures 56 mm x 11 mm x 6.35 mm
• Sold individually

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom fit and appearance.

• Measures 52.5mm x 10mm x 4.95mm
• Sold individually

Graphite nut for Fender® This graphite nut will work for most Fender® and similar style guitars. It is slotted, but does require final shaping and fitting to exact size.
PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 41/64 inches (41.52mm)
• Height #1 (fretboard side) = 13/64 inches (5.06mm)
• Height #2 (headstock side) = 13/64 inches (5mm)
• Thickness at bottom = 9/64 inches (3.46mm)
• Thickness at top = 1/8 inches (3.1mm)

This graphite nut will work for most Gibson® and similar style guitars and basses. It is slotted but does require final shaping and fitting to exact size. PLEASE NOTE: Because this nut tapers in both thickness from top to bottom and height on the fret board side vs. the headstock side all measurements for those dimensions were taken at the center of the nut.

• Length = 1 23/32 inches (43.75mm)
• Height #1 (fretboard side) = 5/16 inches (7.81mm)
• Height #2 (headstock side) = 9/32 inches (7mm)
• Thickness at bottom = 15/64 inches (6.1mm)
• Thickness at top = 3/16 inches (4.78mm)

This graphite nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size. It has a radiused bottom.

• Length = 2 1/64 inches (51.25mm)
• Height = 11/64 inches (4.55mm)
• Thickness = 1/8 inch (3.1mm)

Set of two Fender® high-quality melamine (simulated bone) string nuts with 9.5" radius, for use with most Fender instruments

Bone nut for Gibson®, 43mm x 5.9mm x 8mm at highest point with flat bottom.

This brass nut blank will work for most Fender® and similar style guitars and basses. It is NOT slotted and does require final shaping and fitting to exact size.

• Thickness = 9/64 inches (3.47mm)
• Flat Bottom Length = 1 11/16 inches (43 mm)
• Height at ends = 13/64 inches (5.25mm)
• Height at middle = 15/64 inches (6mm)

High-quality Micarta (synthetic bone) pre-slotted string nut for use on American Standard Precision Bass and other U.S.- and Mexico-made basses with 9.5"-radius fingerboards.

Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 7.25” radius. A 7.25” fingerboard radius originated in the early 1950s and was used for most Fender® electric instruments until the 1980s.

• Height - 5.4 mm
• Width - 42.86 mm
• Thickness - 3.3 mm
• Radius - 7.25 in.

For a version of this nut with a 9.5” radius, see P-GTNN21.

Pre-slotted black bone nuts for Gibson necks with a 12” radius. A 12” fingerboard is the common radius used on most Gibson guitars. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.

• Height - 9.3 mm
• Width - 43.4 mm
• Thickness - 4.8 mm
• Radius - 12 in.

Pre-slotted black bone nuts for Stratocaster®, Telecaster®, and other Fender® necks with a 9.5” radius. A 9.5” fingerboard has been the standard Fender® neck radius since the 1980s. The bone used for the pre-shaped and pre-slotted nuts is dyed black using a process that results in a fully black nut.

• Height - 5.4 mm
• Width - 42.86 mm
• Thickness - 3.3 mm
• Radius - 9.5 in.

For a version of this nut with a 7.25” radius, see P-GTNN20.

Genuine Fender® pre-slotted melamine nut for Telecaster and Stratocaster guitars. This nut has 9 1/2 in. top radius and 7 1/4" bottom radius with an overall length of 1.695 in.

The PQ-5042-00 is a great option to upgrade the nut on your Fender style electric guitar (or a guitar with similar specs). It is pre-slotted for a quick and simple install. It is 3/16" tall so make sure that is enough height for your guitar. Dimensions: Length - 1.653 in. (41.98mm) Width - 0.126 in. (3.22mm) Height - 0.196 in. (4.98mm) E to E - 1.388 in. (35.25mm)

The 4025-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a ¼" thick slab of TUSQ XL. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 2.5 in. (63.5mm)
• Width - 0.25 in. (6.35mm)
• Height - 0.437 in. (11.1mm)

The 5000-00 is a perfect option to replace and upgrade the nut in almost all Fender style electric guitars. It will work in both a flat bottom or curved bottom nut slot due to its ingenious design. The 5000-00 nuts have a 9.5 in. radius This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.687 in. (42.85mm)
• Width - 0.128 in. (3.25mm)
• Height - 0.198 in. (5.03mm)
• E to E - 1.39 in. (35.31mm)
• Radius - 9.5 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-1.

The PT-4187-00 is a great option to replace and upgrade the nut on just about any guitar or bass. It is a 3/16” thick slab of TUSQ XL. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 2.5 in. (63.5mm)
• Width - 0.187 in. (4.75mm)
• Height - 0.437 in. (11.1mm)

The PQ-M644-00 is the perfect option to replace and upgrade the nut on your Martin style acoustic guitar. It has an angled bottom and comes pre-slotted to make for a quick and easy install. Dimensions:

• Length - 1.745 in. (44.32mm)
• Width - 0.224 in. (5.69mm)
• Height - 0.361 in. (9.17mm)
• E to E - 1.418 in. (36.02mm)

The PQ-M100-00 is a TUSQ nut blank specially designed to be used on Martin style guitars. It has an angled bottom and needs to be slotted. Dimensions:

• Length - 1.89 in. (48.01mm)
• Width - 0.226 in. (5.74mm)
• Height - 0.42 in. (10.67mm)

The PQ-4187-00 is a 3/16" thick block or slab of pure TUSQ. It can be used to make a nut, small saddle or just about anything you can imagine.
Dimensions:

• Length - 2.5 in. (63.5mm)
• Width - 0.187 in. (4.75mm)
• Height - 0.437 in. (11.1mm)