Luthier Parts & Tools

Pick guard screws, phillips, ovalhead. Great for mounting countersunk pickguards, control plates, etc.

• 7/16” threaded portion
• Available in Black, Gold, Nickel, and Chrome plating
• Package of 100

• Body Diameter: 24 mm
• Power Rating 1/3 watt
• Bushing Diameter: 3/8" (Threading: 3/8-32)
• Bushing Length: ¼"
• Shaft Diameter: ¼"
• Shaft Length: 3/8"
• Shaft Material: Aluminum - Solid Shaft

CTS Linear potentiometer,1/4 in. bushing length, solid shaft, 3/8 in. bushing diameter.

• Body Diameter: 24 mm
• Power Rating ⅓ watt
• Bushing Diameter: ⅜" (Threading: 3/8-32)
• Bushing Length: ¼"
• Shaft Diameter: ¼"
• Shaft Length: ⅜"
• Shaft Material: Aluminum - Solid Shaft
• Includes (1) Nut and (1) Lock Washer

Standard fit for most vintage American made tube amps.

Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:

• Non- inductively wound polyester film/foil construction
• Radial lead
• 10% tolerance
• 100v voltage rating
• Rated for 85°C operation
• Tinned copper-clad steel leads

Mod® Electronics Oil Caps are high quality, hand-crafted capacitors that are the perfect choice for guitars, amplifiers, and all audio equipment. Each capacitor is impregnated with mineral oil for a void-free winding providing highly stable capacitance. The capacitor is hermetically sealed in an aluminum casing to ensure a long life. The detailed construction results in a precise capacitance with a tolerance of ±10%. Mod® Oil Caps also feature a red stripe to designate the outside foil.

Switchcraft Switch Tip for Gibson Pickup Selectors. Threading: 8-32. Replacement for Gibson: PRTK-010

Brass tremolo stopper. Used as a floating bridge stop for Fender and Floyd Rose style tremolo systems. Prevents inadvertent vibrato effects produced by resting the picking hand over the bridge while playing. Allows for down-bends and prevents up-bends for a stabilized return of the whammy bar. Allen screw can be easily reversed to allow for a floating bridge setup again. Includes: (1) brass block (1.05" L x .39" W x .49" H) (1) allen key, 2 mm (1) allen screw (M4 x .70 thread, 20 mm length) (1) hex nut (M4 x .70 thread) (2) countersunk mounting screws (10 mm length)

Bourns Audio Taper Potentiometer. Carbon Element, Split Shaft, Solder Lugs.

• 24mm Body Diameter
• ¼ watt
• 300° rotation
• ¼" Knurled 18-Spline Split Shaft
• ⅜" Bushing Length
• Tolerance: ±20 %
• Maximum Operating Voltage: 250V

Solid shaft, audio taper. 24mm body diameter, 1/4 watt, 300 degree rotation, 1/4" shaft diameter, solder lugs, 3/8" bushing.

The 24mm body knurled shaft potentiometer features a 1/3 watt rating and a 3/8" bushing. 24 teeth slot and knurled shaft.
Includes:

• 1 nut
• 1 lock washer

One of the most rugged and durable switches available for your Gibson Les Paul or similar two pickup guitars.

Designed to polish all types of fret wire. Includes 24 × polish pads, 2 × fretboard guards, 1 × finishing cloth

These parts are born from GOTOH's latest, state of the art manufacturing processes. In order to breathe life into these parts and build the finest machine heads in the world, they are exquisitely finished by skilled artisians, with absolutely no compromise. The work of craftsmen on each individual part has gained the classic machine heads of the 35G series, critical acclaim and trustworthiness in the eyes of musicians all over the world. These feature a 14:1 gear ratio for great tuning stability. Mounted 3-per-plate, 2 plates. Mounting hardware included.

These super tuners are recognized as such around the world. The SG381 feature a 16:1 gear ratio and has evolved through improvement without compromise at any stage and come equipped with a considerable application of high-technology as standard. With the improvement of precision fitting gears, marvelous touch on playing---they have gained a considerable reputation and are trusted as the No.1 machine head by many musicians all over the world. These come with a Schaller-style head and are perfect for your six-in-a-line setup. Mounting hardware included.

Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.

High quality USA made Gavitt. This wire features an outer waxed cotton braid over a celanese braid. The wire is stranded 22AWG with a tinned overcoat (topcoat) so no additional tinning with a soldering iron is required for use. Sold by the foot.

Pure Tone has developed a high quality 1/4" two pole (mono) jack using a new patented design that improves upon and offers a more reliable connection than standard 1/4" jacks. The Pure Tone design features two springs per pole that secure the plug into place and create a 100% greater surface area connection at all contact points to improve stability and signal integrity. These jacks also increase the current capability of 1/4" connections.

Nut slot graphite lubricant. Doesn't collect dust or absorb sound. Self drying, all natural, non-petroleum, non-toxic

Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications.

A specialized tool for cleanly pulling out frets. The narrow jaws are designed specifically to allow for a clean grip on frets. The special flush ground 1/2" jaws can easily bite the frets without damaging the fretboard.

Grover Vintage Tuners. 'Gibson Deluxe' Style. 3-Per-Side. Package of 6. 'Grover Deluxe' on tuners. 14:1 gear ratio This vintage machine uses a die-cast, two-piece housing for additional strength and precision. The unique bearing surface in the housing provides a rigid string post enhancing the alignment of the gear and worm. The 14:1 gear ratio provides for fine tuning.

Designed for use on arch top electric guitars. Bigsby B7 Specifications

• Model Name: B-7
• Series: Original Kalamazoo Line
• Manufacturing Method: Cast
• Manufacturing Material: Aluminum
• Approximate weight: 354 grams/12.5 oz.
• Overall Length: 8 ¾" /222.3 mm
• Overall Width: 3 5/8" /92.1 mm
• Arm adjusts with 1/8" Allen wrench and 5/16" socket wrench

Bigsby B7 Includes:

• Tremolo
• Arm Assembly
• 6 Mounting Screws
• Spring
• Plastic Washer
• Installation Instructions

50V ceramic capacitors with 5mm footprints for use in amplifiers, stomp boxes, and any other electronic project. These capacitors are small and should easily fit in any sized project. These also feature 1” lead lengths so they work great for point to point wiring.