You are here

Luthier Tools

Filter these results
Sort By:
products per page
View Mode: List View · Grid View


(7 pages)
S-T251Neck Support - 2-Way, For guitar

2-Way Neck Support for guitars. This natural wood, swing design neck support is great for any guitar shop front counter or repair bench and can be used for inspection or repairs of different sized guitars/basses with ease. No need for separate neck supports when switching between acoustic and electric guitars!

  • 2 way adjustable height is compatible with acoustic and electric guitars/basses
  • Large (15cmx15cm) square base keeps the guitar stable and steady during repair
  • Natural cork used at guitar contact points.

Click to read more
S-T263Knob & Bushing Puller - for Easy Removal From Guitar

Knob and bushing puller. Has a rubberized bottom rim for protecting the guitar’s surface while removing knobs and tailpiece stud bushings. Includes (6) bolts and (2) flat washers for pulling various bushing threads: • 5/16-20 • 5/16-24 • 5/16-18 • 10-32 • M6 x 1.0 • M5 x 0.8

Click to read more
S-T237Fret Rocker - for Identifying Uneven Frets

Fret rocker luthier tool. Four precision ground flat edges having lengths: 4.0”, 3.0”, 2.0” and 1.3”. Perfect for finding the source of fret buzz. Place the flat edge over three frets at a time and try to rock the tool. If the tool rocks, you’ve located the uneven fret.

Click to read more
S-T203String Spacing Ruler - Steel

Get accurate string spacing without the use of complicated tools with this easy-to-use String Spacing Ruler. "Mark outer string locations with pencil lines (high and low E strings on guitars), usually about 1/8" in from fingerboard edges. Turn ruler over (use marked side). With wide spacing toward bass side, narrow spacing toward treble side, find group of marks (six for guitar) which best fit your two pencil lines. Use a razor knife or thin mechanical pencil to mark the string positions through the ruler's slots.

Click to read more
S-T202Understring Radius Gauges - 9 Sizes, for Saddle Adjustments
Our low profile aluminum understring radius gauges have a precision radiused top and bottom for accurate measurement. The slim shape allows you to take measurements of several radii without removing the strings on your guitar.

  • Obtain accurate measurements of your instrument's fretboard radius using the bottom radius of the gauge. The bottom radius can also be used to set pickup polepiece height to the string radius.
  • Use the top radius of this gauge to determine the proper height adjustment for the bridge saddles.
  • The following gauges are included in this set: 7.25" 9.5" 10" 12" 14" 15" 16" 17" 20"
You save: 8%
Click to read more
S-F504XAdhesive - Bob Smith Industries, Maxi-Cure Extra Thick Cyanoacrylate
Multiple Options Available

Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)

  • Extra thick, gap filling consistency
  • 10-25 second cure time
  • For looser fitting applications where a low viscosity glue is required
  • Available in 1oz. and 2oz. sizes

WARNING*: These products are eye and respiratory irritants. Product can bond skin instantly.

Starting at $5.50
Click to read more
S-F502XAdhesive - Bob Smith Industries, Insta-Cure + Gap Filling
Multiple Options Available

Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!

Starting at $5.50
Click to read more
S-T235Precision Router Base - Support for Dremel Tool

A sturdy, adjustable-height support for Dremels.

Click to read more
S-F500XAdhesive - Bob Smith Industries, Insta-Cure Super Thin
Multiple Options Available

Bob Smith Industries™ Insta-Cure™ Super Thin Cyanoacrylate. A must have for luthiers! Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds (1-3 sec.). Surfaces to be bonded must be tight fitting (no visible gaps) and should be held together or clamped while you apply the CA around the edges of the seam. For glue applications with small gaps or looser fitting joints the higher viscosity Insta-Cure+™ is recommended.

  • Water-thin consistency
  • 1-3 second cure time
  • For tight fitting applications
  • Available in 1oz. and 2oz. sizes

WARNING: These products are eye and respiratory irritants. Product can bond skin instantly. Keep away from children!

Starting at $5.50
Click to read more
S-T264File - Diamond, for Frets, Straight
Multiple Options Available
Double sided diamond fret file.
Easily the best choice for fret crowning, diamond files cut in two directions(push and pull) rather than one with no chatter giving you a smoother fret after the crowning process
File cutting surface is impregnated with diamonds to give you a smooth cut with long lasting durability.
  • Made of solid steel with diamond cutting surface.
  • Soft rubber coating on the handle
  • 5-3/4” cutting surface
  • Double sided to cover different fret sizes
  • Available in 150 and 300 grit coatings
Starting at $59.95
You save: 5%
Click to read more


(7 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Luthier Tools