 | Radius Gauges - NotchedSolid, high quality stainless steel radius gauges, notched version. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench.
Narrow gauges are used for measuring at the nut to the 7th fret, while the wide gauges are used for measuring at the 7th and higher numbered frets.
- Gauge 1+2 has 7.25", 9.5", 10", and 12" radiuses
- Gauge 3+4 has 14", 15", 16", and 20" radiuses
- Notched version great for taking measurements with strings on
- Set of 4
| $29.95 | Click to read more about this product. |
 | Fret Puller - Narrow JawsA specialized tool for cleanly pulling out frets. The narrow jaws are designed specifically to allow for a clean grip on frets.
| $7.95 | Click to read more about this product. |
 | File Set - Standard Super Fine, 5 TypesSuper fine set of files for ultra-fine file work. Swiss Model. 200 mm in length Includes:
- (1) flat
- (1) half round
- (1) round
- (1) square
- (1) three square (i.e. triangular)
| $52.25 | Click to read more about this product. |
 | File Set - Standard Fine, 5 TypesSet of fine files for precise file work, 2nd cut. Made in Japan. 190 mm in length. Includes:
- (1) flat
- (1) half round
- (1) round
- (1) square
- (1) three square (i.e. triangular)
| $33.35 | Click to read more about this product. |
 | Fret Slot Cleaning Saws - Ryoba Multiple Options Available Fret slot saw with two blades, one for push-cutting and another for pull-cutting.
| $21.95 | Click to read more about this product. |
 | Fret Slot Cleaning Saws - StandardMultiple Options Available Fret slot cleaning saw with 45 degree angle and pencil grip. Dimensions:
- 0.40 mm or 0.50 mm blade thickness
- 15 mm blade length
- 160 mm total length
| $17.10 | Click to read more about this product. |
 | Neck Cradle - Dunlop, Maintenance Station The self-aligning cradle rotates to provide full support to the back or front of the neck for increased stability during repairs or maintenance work.
| $29.95 | Click to read more about this product. |
 | Nut File - Edge-CutMultiple Options Available Edge cut nut files in popular gauges specially designed for slotting nuts. These files cut a smooth, round bottom slot. Also great for slotting tune-o-matic bridge saddles!
Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.
- 4-1/2” cutting edge
- Double sided (both sides are the same gauge)
- 10 gauges available
- Sold individually*
- Made In Japan
*See S-T213-SET for a set of all 10 sizes. | Starting at $11.50 | Click to read more about this product. |
 | Fret Saw Guide - for Ensuring Straight CutsThree neodymium magnets on each end to ensure a straight cut at a right angle. The saw guide can adjust 0mm to 4.7mm slot depth by sliding the frame. The slide frame side has scale marks representing 1mm of depth. Size is 195 x 90 x 25 mm. Weight is 475g.
| $81.95 | Click to read more about this product. |
 | String Spreader - for Fret Work Without Unstringing, Set of 2Those of us who don’t want to fully remove that new set of strings to do some quick spot work on the fret board or nut will love this simple yet effective tool. Simply loosen your strings and place the string spreaders underneath the guitar neck. Bring the strings off the neck and latch them underneath the spreader's ends to allow for quick and easy fret-board work without the need to unstring your instrument. These string spreaders will quickly become a must have in your toolbox!
- Make room for cleaning, polishing or spot work on frets without removing strings
- Made of brass with a soft, finish safe, rubber coating
- Set of 2
| $8.95 | Click to read more about this product. |
480.820.5411