Maintenance Products

DeoxIT® - Caig, D5 Spray, Low-Medium-High Spray
DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion.
$16.99
Tool - Potentiometer Cleaning Cap, Aluminum
Potentiometer cleaning caps for use with aerosol cleaners such as DeoxIT. This is a great tool for difficult to clean potentiometers such as those on hollow body guitars and certain amp chassis. The design pushes the spray in through the bushing of the potentiometer removing the need to access the back of the potentiometer. To use: Remove the knob and thread the cleaning cap onto the potentiometer. If there is enough bushing, attach the rubber o-ring first. If not, simply thread the cleaning cap onto the bushing and place a rag around it. Using a rag is recommended with and without the o-ring. Insert the DeoxIT straw into the small hole on the side of the cleaning cap. Cover the open end with your finger and spray. The cleaning solution is directed to the shaft of the pot where it can seep in. You can turn split shaft pots with a screwdriver through the open end to help move the cleaner around inside the pot.
$8.50
DeoxIT - Caig, D5 Spray, Perfect Straw
DeoxIT® D-Series - Contact Cleaner & Rejuvenator with NEW Perfect-Straw™ nozzle. Never lose your straw again! More than a Contact Cleaner . . . Chemically Improves Connections (without harm to metals and plastics) DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts. Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
$16.99
DeoxIT® Fader F5 - Caig, 5% solution
This product is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
$17.95
Deoxit® Gold G5 - Caig, Mini Spray, 5%, 14g
DeoxIT® GOLD (formerly ProGold), is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.).
Use on plated connectors, contacts and metal surfaces for maximum performance and protection. Recommended for critical applications where only slight cleaning action is necessary.
  • Conditions Gold Surfaces
  • Enhances Contact
  • Seals and protecs surfaces

Flushing action, safe on plastics.
If the surface looks clean, applying DeoxIT® contact cleaner first is usually not necessary. DeoxIT® GOLD is designed to dissolve small amounts of oxidation. Apply DeoxIT® GOLD after DeoxIT® contact cleaner on plated metal surfaces. The more critical the connection or part, especially low current applications, DeoxIT® GOLD should be the final step.
$3.50
Save 50%
Originally: $7.00
Cleaner - Caig, Contact Cleaner Wash
Contact Cleaner Wash, Val-U Series Spray, adjustable valve, 5.5 oz., fast evaporating and safe on plastics.
Used for switches/relays, contacts/connectors, and parts/components.
$7.95
Corona Dope - GC Electronics, lacquer coating, 2 oz.
Corona Dope is useful for insulating components, circuits and assemblies. It has high dielectric strength and is especially useful where high voltages are involved. Also has excellent arc and corona resisting properties and protects surfaces against moisture. Cures in 20 minutes at room temperature. GC Electronics Corona Dope is commonly used to reseal flyback transformers and other parts on CRT monitors and displays.
  • Color: Black
  • Specific Gravity: 0.9
  • Dielectric Strength: 3800 V/Mil
  • Softening Point: 180°C to 190°C
  • Temperature Range: Up to 340°F
  • Viscosity @ 25°C: 220 cps
$14.50
Heat Sink Compound - silicone, Type Z9, 1 oz
Type Z9, 1 fluid ounce. Silicone base, extra high-efficiency heat transfer. Made in USA. For mounting transistors, diodes, rectifiers, and resistors. Thermal joint compound for any device where efficient cooling is desired.
  • For effective transfer of heat between components & heat sinks
  • Will not dry or harden
  • White paste

Grease-like consistency; opaque white in color; zero bleed; very stable at elevated temperatures; excellent thermal resistance and high thermal conductivity; efficient thermal coupler; effective and positive heat sink sealers and heat transfer agent. The product offers high thermal conductivity, virtually no bleed or evaporation over a wide operating temperature range. It will not harden, dry out or melt after 1,000 hours at 200°C. Meets Mil-C-47009 and Mil-C-47113.
$7.75
Flex Tip - Caig, Extension Tube for Perfect-Straw
Now you can get into all the hard to reach places with the new CAIG FLEX-TIP™ - Extension Tube for Perfect-Straw™.
  • Reduces straw diameter at tip
  • Reduces flow
  • Flexible - Get to Hard to reach places (1.5" length)
  • Fits ALL Perfect-Straw™ Tubes
  • Chemically resistant tube
$1.95
Tip Tinner - Caig, DeoxIT®, for soldering irons
CAIG DeoxIT brand tip tinner 14.2 gram jar, soldering tip cleaner and conditioner. For cleaning and protecting of soldering iron tips. Prevents oxidation of tips. Keep your soldering iron tip optimized for accepting solder and efficiently heating your soldering surfaces for an easy flow of solder between the iron’s tip and your work. To use, dip the heated soldering iron tip into the compound. (Keep the lid on the container when not in use). A double sided tape on the bottom allows you to secure the jar to your soldering station.
$10.45
Flux Wash - Caig, for cleaning flux / silicon / oil
Caig Flux Wash cleans and removes fluxes, light oils, and silicon.
  • Safe on most plastics
  • Evaporates quickly
  • Removes wax and grease

Val-U Series Spray, adjustable valve, 5.5 oz.
$7.82
Coating - GC Electronics, Q-Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
$10.25
DeoxIT® D100L Liquid - Caig, needle dispenser
DeoxIT® D100L Liquid, 100% solution. Chemically improves metal to metal connections and contacts. Dissolves corrosion, improves contact, and protects surfaces
$31.45
DeoxIT® - Caig, DN5 Spray, Perfect Straw
DeoxIT® DN5 Spray, 5% solution. Chemically improves metal to metal connections and contacts. Dissolves corrosion, improves contact, and protects surfaces
Starting at $14.40
DeoxIT® D5 - Caig, Mini Spray, 5%, 24g
The popular DeoxIT D5 contact cleaner & rejuvenator is now available in a mini spray can. DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion. This mini can comes with an attachable straw that fits in the adjustable spray nozzle for a controlled flushing action. DeoxIT® D5 is safe on plastics. Key Features:
  • Improves Conductivity
  • Deoxidizes, Cleans and Preserves
  • Reduces Intermittent Connections
  • Reduces Arcing & RFI
  • Reduces Wear & Abrasion
  • Temperature Range, -34 C (-29 F) to +200 C (400 F)
$10.69
DeoxIT® Fader F100 - Caig, 100% spray
DeoxIT® Fader Spray (formerly CaiLube MCL, MCL100S-L2) is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
$19.74
DeoxIT® - Caig, D100L Brush Applicator
DeoxIT® D100L Brush Applicator, 100% solution, 7.4 ml, (Applications = 500 ± brush strokes, 10mm long).
$15.95
Membrane repair - Caig, Caikote 44 carbon coating
Conductive Carbon Coating for most surfaces (rubber, epoxy, glass, plastic). It is ideal for repairing membrane buttons, keyboard buttons, and other carbon based surfaces. It may also be used as a coating for shielding (EMI) of electronics. Similar products on the market are more expensive, and have multiple containers requiring mixing prior to application. The CaiKoteTM 44 is applied in one step, allowed to dry and is ready for service.
$9.95
DeoxIT® - Caig, D5 pump spray can, 25%
DeoxIt Pump Spray 25% concentrate solution. Non-flammable. 150ml. May be shipped by air to US and other countries. DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion. DeoxIT® D5 is safe on plastics.
$22.95
DeoxIT® Fader - Caig, Liquid squeeze tube
DeoxIT® cleaner and lubricant for conductive plastic faders and controls. Improves conductivity, maintains optimum signal quality, reduces wear and improves tactile feel - flushing action, safe on plastics. 2mL Squeeze Tube
$6.95
DeoxIT® D100L - Caig, squeeze tube
DeoxIT® D100L squeeze tube chemically improves metal to metal connections and contacts.100% solution, 2 ml,(Applications = 50 ± drops, 0.04 ml/drop).
$5.65
DeoxIT® Fader Grease - Caig, for lubricating electronics
DeoxIT® FaderGrease was specifically formulated to improve conductivity and lubricate conductive plastic and carbon compound faders, switches and other mechanisms with sliding surfaces. Provides clearer audio, clearer video, and reliable data. Over time these components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, smoke, drink spills and other contamination also degrade the components' lubricant. Re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces. 28 grams
$17.55
DeoxIT® Fader FN5 - Caig, Mini Spray, 5%, 40g
DeoxIT® Fader FN5 is a non-flammable precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions. FN5 lubricates and protects plastic to plastic and plastic to metal surfaces.
$15.25
DeoxIT® Gold - Caig, GN5 Spray, 5% solution
DeoxIT® GOLD GN5 Spray (formerly ProGold), 5% solution, 163 g, non-flammable, quick dry - non drip, and safe on plastics! Cannot ship by Air or Mail. Must ship UPS ground.
Starting at $16.15