You are here

Maintenance Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(5 pages)
S-CD5S-6PDeoxIT - Caig, D5 Spray, Perfect Straw

DeoxIT® D-Series - Contact Cleaner & Rejuvenator with NEW Perfect-Straw™ nozzle. Never lose your straw again! More than a Contact Cleaner . . . Chemically Improves Connections (without harm to metals and plastics) DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts. Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.


$13.95
Click to read more
S-CD5S-6-LMHDeoxIT - Caig, D5 Spray, Low-Medium-High Spray

DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion.


$16.95
Click to read more
S-CL-EXT-PS2Flex Tip - Caig, Extension Tube for Perfect-Straw

Now you can get into all the hard to reach places with the new CAIG FLEX-TIP™ - Extension Tube for Perfect-Straw™.



  • Reduces straw diameter at tip
  • Reduces flow
  • Flexible - Get to Hard to reach places (1.5" length)
  • Fits ALL Perfect-Straw™ Tubes
  • Chemically resistant tube

$1.95
Click to read more
S-CTPC-14Tip Tinner - Caig, DeoxIT®, for soldering irons

CAIG DeoxIT brand tip tinner 14.2 gram jar, soldering tip cleaner and conditioner. For cleaning and protecting of soldering iron tips. Prevents oxidation of tips. Keep your soldering iron tip optimized for accepting solder and efficiently heating your soldering surfaces for an easy flow of solder between the iron’s tip and your work. To use, dip the heated soldering iron tip into the compound. (Keep the lid on the container when not in use). A double sided tape on the bottom allows you to secure the jar to your soldering station.


$8.05
Click to read more
S-CF5S-H6DeoxIT® Fader F5 - Caig, 5% solution

This product is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.


$17.25
Click to read more
S-CDCC-V511Cleaner - Caig, Contact Cleaner Wash

DeoxIT® Brand Contact Cleaner Wash, Val-U Series Spray, adjustable valve, 5.5 oz., fast evaporating and safe on plastics.



Used for switches/relays, contacts/connectors, and parts/components.



Cannot ship by Air or Mail. Must ship UPS ground.


$7.25
Click to read more
S-C10-8109Heat Sink Compound - silicone, Type Z9, 1 oz

Type Z9, 1 fluid ounce. Silicone base, extra high-efficiency heat transfer. Made in USA. For mounting transistors, diodes, rectifiers, and resistors. Thermal joint compound for any device where efficient cooling is desired.



  • For effective transfer of heat between components & heat sinks
  • Will not dry or harden
  • White paste


Grease-like consistency; opaque white in color; zero bleed; very stable at elevated temperatures; excellent thermal resistance and high thermal conductivity; efficient thermal coupler; effective and positive heat sink sealers and heat transfer agent. The product offers high thermal conductivity, virtually no bleed or evaporation over a wide operating temperature range. It will not harden, dry out or melt after 1,000 hours at 200°C. Meets Mil-C-47009 and Mil-C-47113.


$6.75
Click to read more
S-C10-4702Corona Dope - GC Electronics, lacquer coating, 2 oz.

Corona Dope is useful for insulating components, circuits and assemblies. It has high dielectric strength and is especially useful where high voltages are involved. Also has excellent arc and corona resisting properties and protects surfaces against moisture. Cures in 20 minutes at room temperature.



  • Color: Black
  • Specific Gravity: 0.9
  • Dielectric Strength: 3800 V/Mil
  • Softening Point: 180°C to 190°C
  • Temperature Range: Up to 340°F
  • Viscosity @ 25°C: 220 cps

$9.98
Click to read more
S-CSK-GXMDVacuum Tube Survival Kit - Caig, DeoxIT® Gold

The Caig DeoxIT® Gold GxMD Vacuum Tube Survival Kit includes everything you need to properly clean the pins of vacuum tubes and tube sockets.



Includes:



  • DeoxIT® D25L-25C, 25 mL bottle
  • DeoxIT® Gold GXMD-2DB, Brush Applicator
  • B-SS116, stainless steel precision cleaning brush, 1/16″ dia., 4″ overall length, loop end
  • Lint-free swabs, brushes, cloths
  • Display box (8.0 x 5.0 x 1.5″)

$32.25
Click to read more
S-CD100L-25CDeoxIT® D100L Liquid - Caig, needle dispenser

DeoxIT® D100L Liquid, 100% solution. Chemically improves metal to metal connections and contacts. Dissolves corrosion, improves contact, and protects surfaces


$31.45
Click to read more

Pages

(5 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Maintenance Products