You are here

Maintenance Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(4 pages)
S-CMP15Ultimate Fret Board Polishing System - Lizard Spit

Designed to polish all types of fret wire. Includes 24 × polish pads, 2 × fretboard guards, 1 × finishing cloth


$9.95
On Backorder
Click to read more
S-CSLN10Lubrication - Lizard Spit, Slick Nutz Slot Lube, 1 oz.

Nut slot graphite lubricant. Doesn't collect dust or absorb sound. Self drying, all natural, non-petroleum, non-toxic


$10.75
Click to read more
S-C217XPlastic Polish - Novus #2, fine scratch remover

Removes fine scratches, abrasions and haziness from plastic surfaces. Great for plastic radio dial windows. For best results, follow with Novus No. 1 polish.


Starting at $3.50
Click to read more
S-CMP02Fretboard Conditioner - Lizard Spit, 4 oz.

Removes dirt and stains and slows oxidation of frets. Protects against drying and cracking by moisturizing and conditioning to preserve fret board life. Use Lizard Spit Guitar Polish for finished surfaces.


$9.95
Click to read more
S-C216XPlastic Polish - Novus #1, plastic clean and shine

Cleans and glazes plastic surface polish out and protect against small scratches, finger markings, dust build-up, and other markings. Significantly reduces haziness and is anti-static.


Starting at $2.75
Click to read more
S-C215XPlastic Polish - Novus #3, heavy scratch remover

Removes scratches from acrylic surfaces; significantly reduces haziness. More abrasive than Novus #2 and is effective for deeper scratches. Treatment should be followed by Novus #2 to buff and polish surface.


Starting at $3.95
Click to read more
S-CMPXPolish - Lizard Spit, for Guitars

Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.


Starting at $3.75
Click to read more
S-F500XAdhesive - Bob Smith Industries, Insta-Cure Super Thin

Bob Smith Industries™ Insta-Cure™ Super Thin Cyanoacrylate. A must have for luthiers! Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds (1-3 sec.). Surfaces to be bonded must be tight fitting (no visible gaps) and should be held together or clamped while you apply the CA around the edges of the seam. For glue applications with small gaps or looser fitting joints the higher viscosity Insta-Cure+™ is recommended.



  • Water-thin consistency
  • 1-3 second cure time
  • For tight fitting applications
  • Available in 1oz. and 2oz. sizes


WARNING: These products are eye and respiratory irritants. Product can bond skin instantly. Keep away from children!


Starting at $5.50
Click to read more
S-F504XAdhesive - Bob Smith Industries, Maxi-Cure Extra Thick

Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)


Starting at $5.50
Click to read more
S-F502XAdhesive - Bob Smith Industries, Insta-Cure Gap Filling

Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!


Starting at $5.50
Click to read more

Pages

(4 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Maintenance Products