Maintenance Products

Lid for 1 quart mixing container. Seals container and prevents spills. High-density polyethylene. Use with S-TMIX-1 (sold separately).

Replacement colored cap that fits over the S-F312 top. These are sold individually and the color is randomly selected

Replacement top that is on all of BSI's non-Pocket CAs. Perfect for replacing damaged tops on any of the CA glues. These tops can be soaked in acetone overnight to remove any buildup of CA on the inside and outside of the nozzle. Compatible with S-F500,S-F501, S-F502, S-F503, S-F504, S-F505, S-F550, S-F551, and S-F540.

Non-clog 6" long pipette for CA glue application. The regular tip is recommended for gap filling and extra-thick CA. CA is sucked up into the applicator by inserting it into an open CA bottle with the bulb at the end compressed, like an eyedropper The fine tip is recommended for the application of thin CAs. It can also be used for the fine application of Insta-Set accelerator and for applying fine lubricating oils. CA can be kept in the applicator for two weeks.

2 oz clear jar with a white cap. Instant identification for your parts, liquids or dry goods. Super wide mouth for easy filling.

• Durable polystyrene jars.
• FDA compliant.
• Caps included.

Now you can get into all the hard to reach places with the new CAIG FLEX-TIP™ - Extension Tube for Perfect-Straw™.

• Reduces straw diameter at tip
• Reduces flow
• Flexible - Get to Hard to reach places (1.5" length)
• Fits ALL Perfect-Straw™ Tubes
• Chemically resistant tube

1 quart mixing container. Quickly measure and mix paints, chemicals and adhesives. Clearly marked graduations for quick measuring. Made of translucent high-density polyethylene. Optional lid S-TMIX-1-LID (sold separately) seals the container and prevents spills.

Cleans and glazes plastic surface polish out and protect against small scratches, finger markings, dust build-up, and other markings. Significantly reduces haziness and is anti-static.

Bob Smith Industries ™ Extender Tip for CA glues. This extender tip can be used with all viscosities (Thin,Medium,Extra Thick) of cyanoacrylate that we offer from Bob Smith Industries™ and is compatible with both available sizes (1oz and 2oz) Extender tips can help you reach difficult spaces and control the flow of glue for more precise application.

• Helps focus glue stream
• Works with all three CA glue viscosities
• Package of 6

Novus Plastic Polish Mates offer cloth-like softness in a disposable wiper. These wipers are highly absorbent, abrasion-resistant, low lint and extra durable. Package of 6 Mates. Using the wrong cloth when cleaning plastics can damage the surface. Standard paper toweling, polyester or rayon cloths can leave scratches in plastic. Alleviate this problem by using only NOVUS Plastic Polish Mates for all your plastic cleaning jobs. For best results, use with Novus Plastic Polishes No.1, No. 2, and No. 3

Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.

This pack includes 24 fresh fret polishing pads for use with the Lizard Spit Ultimate Fret Polishing System, S-CMP15.

Removes fine scratches, abrasions and haziness from plastic surfaces. Great for plastic radio dial windows. For best results, follow with Novus No. 1 polish.

Insta-Clean™ is ideal for removing price stickers and their adhesive residue. Insta-Clean™ will also remove scuff marks that regular household cleaners won't touch. Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. Uses

• Stickers
• Sticker Residue
• Residue on Glass
• Residue on Fiberglass

Directions: Spray directly onto the sticker to be removed. Let stand for 1 to 5 minutes and then peel off sticker and wipe clean.

Un-Cure™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of Un-Cure™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastic parts with a razor saw is usually the best option. Works Well On:

• Cyanoacrylates
• Super Glues

Directions: Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water.

Strong, absorbent towels for auto and machine shops. Works like cloth for your tough jobs. Absorbs grease and oil, even when wet. Fits any standard paper towel dispenser. 11” x 9" sheets.

Removes scratches from acrylic surfaces; significantly reduces haziness. More abrasive than Novus #2 and is effective for deeper scratches. Treatment should be followed by Novus #2 to buff and polish surface.

CAIG’s DeoxIT® L260 Grease is a lithium grease with unique additives to enable it to adhere and stay on the surfaces it is applied to. It has a tenacity to stick to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used on mechanical devices – also electrical devices and equipment; such as high powered switches, disconnects, connectors, relays and exposed connections in severe environments.

Multi-use tool oil for both maintaining and using tools. This rust-preventive oil can be used to lubricate tools such as hinges on pliers. It can also be used to thinly coat metal tools to avoid future corrosion. Additionally, it can be used as a cutting and filing lubricant when slotting a nut for a guitar, slotting bridge saddles, and other cutting purposes. The 15ml bottle features a needle dropper tip.

Simply clean the contacts with a drop of DeoxIT® and extend the life of batteries!

• Dissolves oxidation & corrosion
• Longer battery & device life
• Revives your electronics
• Safe and easy to use

Baby blue micro fiber cloth for use with Lizard Spit or other polishing products.

IC-LOC™ Red is a medium thickness, high strength thread lock that is applied to the threads of fasteners before assembly. Once the IC-LOC Red™ is cured, the fasteners are permanently together and cannot be disassembled. IC-LOC Red™ will maintain its strength up to 490° F. Uses

• Threads of fasteners
• Threads that need permanent bond

Directions: Shake well and then apply IC-LOC™ Red to the clean and dry threaded areas before assembling non- plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™Red is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. IC-LOC™ Red permanently prevents the loosening of threaded fasteners from shock and vibration, while sealing and preventing the rusting of threads. Cured temperature range is -60° to +300°F (-51° to +149°C).

Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!

Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

• Convenient pump spray (2oz.