You are here

Maintenance Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(10 pages)
S-CF100L-L2CDeoxIT® Fader - Caig, Liquid squeeze tube

DeoxIT® cleaner and lubricant for conductive plastic faders and controls. Improves conductivity, maintains optimum signal quality, reduces wear and improves tactile feel - flushing action, safe on plastics. 2mL Squeeze Tube


$5.95
Click to read more
S-F506XAdhesive - Bob Smith Industries, Insta-Set Foam, Pump Spray

Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.



  • Convenient pump spray (2oz.

Starting at $5.95
Click to read more
S-F508XAdhesive - Bob Smith Industries, Extender Tip for Glue
Package of 6

Bob Smith Industries ™ Extender Tip for CA glues. This extender tip can be used with all viscosities (Thin,Medium,Extra Thick) of cyanoacrylate that we offer from Bob Smith Industries™ and is compatible with both available sizes (1oz and 2oz) Extender tips can help you reach difficult spaces and control the flow of glue for more precise application.



  • Helps focus glue stream
  • Works with all three CA glue viscosities
  • Package of 6

$5.95
Click to read more
S-C654CGuitar Polish & Cloth - Dunlop, Formula 65, Microfiber

Formula No. 65 Polish and Cleaner with a microfiber cloth! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand . And while you’re at it why not grab a nice microfiber cleaning cloth to go along with it? Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use. Includes:



  • (1) 4 oz. bottle of Dunlop Formula No. 65
  • (1) microfiber cleaning cloth

$5.95
Click to read more
S-F500XAdhesive - Bob Smith Industries, Insta-Cure Super Thin

Bob Smith Industries™ Insta-Cure™ Super Thin Cyanoacrylate. A must have for luthiers! Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds (1-3 sec.). Surfaces to be bonded must be tight fitting (no visible gaps) and should be held together or clamped while you apply the CA around the edges of the seam. For glue applications with small gaps or looser fitting joints the higher viscosity Insta-Cure+™ is recommended.



  • Water-thin consistency
  • 1-3 second cure time
  • For tight fitting applications
  • Available in 1oz. and 2oz. sizes


WARNING: These products are eye and respiratory irritants. Product can bond skin instantly. Keep away from children!


Starting at $5.50
Click to read more
S-F502XAdhesive - Bob Smith Industries, Insta-Cure Gap Filling

Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!


Starting at $5.50
Click to read more
S-F504XAdhesive - Bob Smith Industries, Maxi-Cure Extra Thick

Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)


Starting at $5.50
Click to read more
S-CG100L-2CDeoxIT® Gold - Caig, Squeeze Tube applicator

DeoxIT® GOLD G100L (formerly ProGold), Squeeze Tube, 100% solution, 2 mL, (Applications = 50 ± drops, 0.04 ml/drop)


$5.45
Click to read more
S-C654Guitar Polish - Dunlop, Formula 65 polish and cleaner

Get rid of the gunk! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand! Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use.



  • 4 oz. spray bottle
  • Polishes and protects
  • Will not build up

$5.20
Click to read more
S-C215XPlastic Polish - Novus #3, heavy scratch remover

Removes scratches from acrylic surfaces; significantly reduces haziness. More abrasive than Novus #2 and is effective for deeper scratches. Treatment should be followed by Novus #2 to buff and polish surface.


Starting at $4.95
Click to read more

Pages

(10 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Maintenance Products