Maintenance Products

Lid for 1 quart mixing container. Seals container and prevents spills. High-density polyethylene. Use with S-TMIX-1 (sold separately).

2 oz clear jar with a white cap. Instant identification for your parts, liquids or dry goods. Super wide mouth for easy filling.

• Durable polystyrene jars.
• FDA compliant.
• Caps included.

Now you can get into all the hard to reach places with the new CAIG FLEX-TIP™ - Extension Tube for Perfect-Straw™.

• Reduces straw diameter at tip
• Reduces flow
• Flexible - Get to Hard to reach places (1.5" length)
• Fits ALL Perfect-Straw™ Tubes
• Chemically resistant tube

1 quart mixing container. Quickly measure and mix paints, chemicals and adhesives. Clearly marked graduations for quick measuring. Made of translucent high-density polyethylene. Optional lid S-TMIX-1-LID (sold separately) seals the container and prevents spills.

Cleans and glazes plastic surface polish out and protect against small scratches, finger markings, dust build-up, and other markings. Significantly reduces haziness and is anti-static.

DeoxIT® GOLD (formerly ProGold), is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.).
Use on plated connectors, contacts and metal surfaces for maximum performance and protection. Recommended for critical applications where only slight cleaning action is necessary.

• Conditions Gold Surfaces
• Enhances Contact
• Seals and protecs surfaces

Flushing action, safe on plastics.
If the surface looks clean, applying DeoxIT® contact cleaner first is usually not necessary. DeoxIT® GOLD is designed to dissolve small amounts of oxidation. Apply DeoxIT® GOLD after DeoxIT® contact cleaner on plated metal surfaces. The more critical the connection or part, especially low current applications, DeoxIT® GOLD should be the final step.

Bob Smith Industries ™ Extender Tip for CA glues. This extender tip can be used with all viscosities (Thin,Medium,Extra Thick) of cyanoacrylate that we offer from Bob Smith Industries™ and is compatible with both available sizes (1oz and 2oz) Extender tips can help you reach difficult spaces and control the flow of glue for more precise application.

• Helps focus glue stream
• Works with all three CA glue viscosities
• Package of 6

Novus Plastic Polish Mates offer cloth-like softness in a disposable wiper. These wipers are highly absorbent, abrasion-resistant, low lint and extra durable. Package of 6 Mates. Using the wrong cloth when cleaning plastics can damage the surface. Standard paper toweling, polyester or rayon cloths can leave scratches in plastic. Alleviate this problem by using only NOVUS Plastic Polish Mates for all your plastic cleaning jobs. For best results, use with Novus Plastic Polishes No.1, No. 2, and No. 3

Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.

Removes fine scratches, abrasions and haziness from plastic surfaces. Great for plastic radio dial windows. For best results, follow with Novus No. 1 polish.

This pack includes 24 fresh fret polishing pads for use with the Lizard Spit Ultimate Fret Polishing System, S-CMP15.

CAIG’s DeoxIT® L260 Grease is a lithium grease with unique additives to enable it to adhere and stay on the surfaces it is applied to. It has a tenacity to stick to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used on mechanical devices – also electrical devices and equipment; such as high powered switches, disconnects, connectors, relays and exposed connections in severe environments.

Insta-Clean™ is ideal for removing price stickers and their adhesive residue. Insta-Clean™ will also remove scuff marks that regular household cleaners won't touch. Works on all surfaces, including: glass, cardboard, plastic, fiberglass and everything else. Uses

• Stickers
• Sticker Residue
• Residue on Glass
• Residue on Fiberglass

Directions: Spray directly onto the sticker to be removed. Let stand for 1 to 5 minutes and then peel off sticker and wipe clean.

Un-Cure™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of Un-Cure™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastic parts with a razor saw is usually the best option. Works Well On:

• Cyanoacrylates
• Super Glues

Directions: Un-Cure™ will soften cured super glue (aka cyanoacrylate, CA). To release bonded skin (not near the eyes) apply Un-Cure™, then use a small, rounded object like a paperclip to separate the skin with a peeling action, applying more Un-Cure™ as needed until the skin areas are debonded. Wash the area with soap and water.

Strong, absorbent towels for auto and machine shops. Works like cloth for your tough jobs. Absorbs grease and oil, even when wet. Fits any standard paper towel dispenser. 11” x 9" sheets.

Removes scratches from acrylic surfaces; significantly reduces haziness. More abrasive than Novus #2 and is effective for deeper scratches. Treatment should be followed by Novus #2 to buff and polish surface.

Simply clean the contacts with a drop of DeoxIT® and extend the life of batteries!

• Dissolves oxidation & corrosion
• Longer battery & device life
• Revives your electronics
• Safe and easy to use

DeoxIT® D100L squeeze tube chemically improves metal to metal connections and contacts.100% solution, 2 ml,(Applications = 50 ± drops, 0.04 ml/drop).

DeoxIT® GOLD G100L (formerly ProGold), Squeeze Tube, 100% solution, 2 mL, (Applications = 50 ± drops, 0.04 ml/drop)

Baby blue micro fiber cloth for use with Lizard Spit or other polishing products.

IC-LOC™ Purple prevents loosening of small fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Purple seals and prevents rusting of threads. Uses

• Threads of fasteners
• Bolts
• Screws
• Nuts

Directions: Shake well. Unscrew cap and cut off tip. Apply IC-LOC™ Purple to clean and dry threaded areas before assembling non-plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Purple is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. Cured temperature range is -60° to +300°F (-51° to +149°C). May attack some plastics. Remove residue with a damp cloth. Similar to Loctite Purple.

Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!

IC-LOC™ Red is a medium thickness, high strength thread lock that is applied to the threads of fasteners before assembly. Once the IC-LOC Red™ is cured, the fasteners are permanently together and cannot be disassembled. IC-LOC Red™ will maintain its strength up to 490° F. Uses

• Threads of fasteners
• Threads that need permanent bond

Directions: Shake well and then apply IC-LOC™ Red to the clean and dry threaded areas before assembling non- plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™Red is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. IC-LOC™ Red permanently prevents the loosening of threaded fasteners from shock and vibration, while sealing and preventing the rusting of threads. Cured temperature range is -60° to +300°F (-51° to +149°C).

Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

• Convenient pump spray (2oz.