Maintenance Products

S-CD5S-6-LMH DeoxIT® - Caig, D5 Spray, Low-Medium-High Spray
DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion.
$16.95
S-CD5S-6P DeoxIT - Caig, D5 Spray, Perfect Straw
DeoxIT® D-Series - Contact Cleaner & Rejuvenator with NEW Perfect-Straw™ nozzle. Never lose your straw again! More than a Contact Cleaner . . . Chemically Improves Connections (without harm to metals and plastics) DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts. Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
$13.95
S-CMP15 Ultimate Fret Board Polishing System - Lizard Spit
Designed to polish all types of fret wire. Includes 24 × polish pads, 2 × fretboard guards, 1 × finishing cloth
$9.95
On Backorder
S-CDUCK Lubrication - Dr. Duck's, Ax Wax & String Lube, Organic
For use on the entire fretboard, headstock, front,sides, back and pickguards. Also cleans and lubes bridge saddles, fine tuners on locking tremolo systems, tuning machine knobs and posts. US made with US materials, 4 oz.
$8.25
S-CSLN10 Lubrication - Lizard Spit, Slick Nutz Slot Lube, 1 oz.
Nut slot graphite lubricant. Doesn't collect dust or absorb sound. Self drying, all natural, non-petroleum, non-toxic
$10.75
On Backorder
S-CTPC-14 Tip Tinner - Caig, DeoxIT®, for soldering irons
CAIG DeoxIT brand tip tinner 14.2 gram jar, soldering tip cleaner and conditioner. For cleaning and protecting of soldering iron tips. Prevents oxidation of tips. Keep your soldering iron tip optimized for accepting solder and efficiently heating your soldering surfaces for an easy flow of solder between the iron’s tip and your work. To use, dip the heated soldering iron tip into the compound. (Keep the lid on the container when not in use). A double sided tape on the bottom allows you to secure the jar to your soldering station.
$8.05
S-CF5S-H6 DeoxIT® Fader F5 - Caig, 5% solution
This product is a precision lubricant for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
$17.25
S-CDCC-V511 Cleaner - Caig, Contact Cleaner Wash
Contact Cleaner Wash, Val-U Series Spray, adjustable valve, 5.5 oz., fast evaporating and safe on plastics.
Used for switches/relays, contacts/connectors, and parts/components.
$7.25
On Backorder
S-CD5S-2 DeoxIT® D5 - Caig, Mini Spray, 5%, 24g
The popular DeoxIT D5 contact cleaner & rejuvenator is now available in a mini spray can.
DeoxIT® D5 is a contact cleaner featuring a deoxidizing solution that acts fast to dissolve oxides, sulfides, and corrosion that forms on metal. This cleaner can enhance conductivity without causing shorts, virtually eliminating intermittent signals while improving signal quality. DeoxIT® D5 fills in microscopic gaps to reseal surfaces. The protective coating acts as a lubricant to reduce wear and abrasion.
This mini can comes with an attachable straw that fits in the adjustable spray nozzle for a controlled flushing action.
DeoxIT® D5 is safe on plastics.
Key Features:
  • Improves Conductivity
  • Deoxidizes, Cleans and Preserves
  • Reduces Intermittent Connections
  • Reduces Arcing & RFI
  • Reduces Wear & Abrasion
  • Temperature Range, -34 C (-29 F) to +200 C (400 F)
$9.50
S-C10-8109 Heat Sink Compound - silicone, Type Z9, 1 oz
Type Z9, 1 fluid ounce. Silicone base, extra high-efficiency heat transfer. Made in USA. For mounting transistors, diodes, rectifiers, and resistors. Thermal joint compound for any device where efficient cooling is desired.
  • For effective transfer of heat between components & heat sinks
  • Will not dry or harden
  • White paste

Grease-like consistency; opaque white in color; zero bleed; very stable at elevated temperatures; excellent thermal resistance and high thermal conductivity; efficient thermal coupler; effective and positive heat sink sealers and heat transfer agent. The product offers high thermal conductivity, virtually no bleed or evaporation over a wide operating temperature range. It will not harden, dry out or melt after 1,000 hours at 200°C. Meets Mil-C-47009 and Mil-C-47113.
$7.75
S-C10-4702 Corona Dope - GC Electronics, lacquer coating, 2 oz.
Corona Dope is useful for insulating components, circuits and assemblies. It has high dielectric strength and is especially useful where high voltages are involved. Also has excellent arc and corona resisting properties and protects surfaces against moisture. Cures in 20 minutes at room temperature. GC Electronics Corona Dope is commonly used to reseal flyback transformers and other parts on CRT monitors and displays.
  • Color: Black
  • Specific Gravity: 0.9
  • Dielectric Strength: 3800 V/Mil
  • Softening Point: 180°C to 190°C
  • Temperature Range: Up to 340°F
  • Viscosity @ 25°C: 220 cps
$9.65
S-CL-EXT-PS2 Flex Tip - Caig, Extension Tube for Perfect-Straw
Now you can get into all the hard to reach places with the new CAIG FLEX-TIP™ - Extension Tube for Perfect-Straw™.
  • Reduces straw diameter at tip
  • Reduces flow
  • Flexible - Get to Hard to reach places (1.5" length)
  • Fits ALL Perfect-Straw™ Tubes
  • Chemically resistant tube
$1.95
S-CMPX Polish - Lizard Spit, for guitar cleaning / polishing
Removes: Sweat, dirt, oil, smoke and spilled beer. Produces: Brilliant Shine. The World's Most Effective Guitar Polish! For best results use a clean Lizard Spit Micro Fiber polish cloth. Refrain from using a dirty cloth - it may scratch the surface.
Starting at $3.75
S-F500X Adhesive - Bob Smith Industries, Insta-Cure Super Thin
Bob Smith Industries™ Insta-Cure™ Super Thin Cyanoacrylate. A must have for luthiers! Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds (1-3 sec.). Surfaces to be bonded must be tight fitting (no visible gaps) and should be held together or clamped while you apply the CA around the edges of the seam. For glue applications with small gaps or looser fitting joints the higher viscosity Insta-Cure+™ is recommended.
  • Water-thin consistency
  • 1-3 second cure time
  • For tight fitting applications
  • Available in 1oz. and 2oz. sizes

WARNING: These products are eye and respiratory irritants. Product can bond skin instantly. Keep away from children!
Starting at $5.50
S-F502X Adhesive - Bob Smith Industries, Insta-Cure Gap Filling
Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!
Starting at $5.50
S-CG5MS-15 Deoxit® Gold G5 - Caig, Mini Spray, 5%, 14g
DeoxIT® GOLD (formerly ProGold), is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.).
Use on plated connectors, contacts and metal surfaces for maximum performance and protection. Recommended for critical applications where only slight cleaning action is necessary.
  • Conditions Gold Surfaces
  • Enhances Contact
  • Seals and protecs surfaces

Flushing action, safe on plastics.
If the surface looks clean, applying DeoxIT® contact cleaner first is usually not necessary. DeoxIT® GOLD is designed to dissolve small amounts of oxidation. Apply DeoxIT® GOLD after DeoxIT® contact cleaner on plated metal surfaces. The more critical the connection or part, especially low current applications, DeoxIT® GOLD should be the final step.
$3.50
Save 50%
Originally: $7.00
S-C220-1 Cleaner - Rubber Revitalizer, 1 oz, for restoration / protection
Cleans and revitalizes rubber, prolonging life and restoring function.
  • Prolongs life of rubber parts
  • Deglazes hardened rubber hoses, drive wheels and belts.
  • Revitalizes rubber by removing buildup
  • Restores the "gripping" surface
  • Cleans and makes surfaces like new
$7.95
S-C10-302 Cement - GC Electronics, Service Cement
A quick-drying, waterproof clear adhesive which forms a strong, hard, water and vibration-resistant bond with minimal shrinkage. Ideal for speaker repairs and bonding semi-porus materials to each other or to metals, plastics, etc. 2 oz. bottle. Can be used as a glue for small speaker cone repairs.
$9.95
S-F504X Adhesive - Bob Smith Industries, Maxi-Cure Extra Thick
Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)
Starting at $5.50
S-C654 Guitar Polish - Dunlop, Formula 65 polish and cleaner
Get rid of the gunk! If you want to keep your guitar or bass clean as a whistle and looking as good as possible then Dunlop Formula No. 65 Guitar Polish and Cleaner should always be close at hand! Formula No. 65 Polish and Cleaner removes wax build up, dirt, and grease while it polishes and protects the clear coat finish on your axe. This unique formulation will not build up making it perfect for musicians who clean their guitars after every use.
  • 4 oz. spray bottle
  • Polishes and protects
  • Will not build up
$5.65
S-F508X Adhesive - Bob Smith Industries, Extender Tip for Glue
Package of 6
Bob Smith Industries ™ Extender Tip for CA glues. This extender tip can be used with all viscosities (Thin,Medium,Extra Thick) of cyanoacrylate that we offer from Bob Smith Industries™ and is compatible with both available sizes (1oz and 2oz) Extender tips can help you reach difficult spaces and control the flow of glue for more precise application.
  • Helps focus glue stream
  • Works with all three CA glue viscosities
  • Package of 6
Starting at $3.50
S-CAB-25 Brushes - Caig, for connector cleaning, package of 25
Package of 25
Nylon brush for cleaning contacts and connectors. Ideal for phone and phono(RCA), XLR, coax connectors and patchbays. Package of 25
$12.50
S-C10-3702 Coating - GC Electronics, Q-Dope, 2 oz
Fast drying coating for coils and transformers. Clear, protective coating has minimal effect on inductive values. 2 oz.
$10.95
S-C250 Polish - Magnolia Glayzit Refinisher, restores Bakelite
Glayzit Refinisher for restoration of Bakelite. A siliconized polish that restore Bakelite with its blend of premium wax and oil.
$16.59