 | Neck - for Telecaster Guitar, Vintage RosewoodReplacement Vintage Telecaster® neck with mostly vintage and a few subtle modern features like 21 medium jumbo frets, 10 in. radius, 1 5/8 in. nut width, a comfortable C shaped profile and a honey tinted gloss finish. Rosewood finger board with a heel adjust truss rod location and 8.8mm peg holes drilled for a vintage Kluson® tuning machine as nature intended. Nut not included. Fender Licensed replacement neck.
| $166.50 | Click to read more |
 | Neck - for Telecaster Guitar, RosewoodReplacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included. Fender Licensed replacement neck.
| $135.00 | Click to read more |
 | Neck - for Telecaster Guitar, Maple, Headstock AdjustReplacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius maple fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included. Fender Licensed replacement neck.
| $135.00 | Click to read more |
 | Neck - for Stratocaster Guitar, Maple, Headstock AdjustReplacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius maple fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck.
| $135.00 | Click to read more |
 | Neck - for Stratocaster Guitar, RosewoodReplacement Stratocaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 in. radius rosewood fingerboard. The nut width is 1 11/16 in. wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson® tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Stratocaster®. Nut not included. Fender Licensed replacement neck.
| $135.00 | Click to read more |
 | Pickguard - Fender®, for American Stratocaster, 11-hole Fits most American and Mexican stratocasters | Starting at $20.95 | Click to read more |
 | Gift Set - Grover, for Electric Guitarist Contains: 1 electronic tuner, 1 Ultra-Capo, 2 strap locks, 3 medium shell guitar picks. | $21.95 | Click to read more |
 | Switch - 3-Way for TeleOak® 3 way lever switch for Tele® Standard U.S. size. Fits 1/16" x 1-1/16" slot.1-5/8" center to center screw spacing. 1-3/8" cavity depth.
| $7.95 | Click to read more |
 | Switch - 5-Way for StratOak® single wafer 5 way lever switch.Standard U.S. size. Fits 1/16" x 1-1/16" slot. 1-5/8" center to center screw spacing. 1-3/8" cavity depth.
| $7.50 | Click to read more |
 | Accessory Kit - Fender®, for StratocasterIncludes Volume & Tone knobs, tremolo knob, switch tip, tremolo back plate, and pickup cover
| Starting at $17.50 | Click to read more |
 | Switch - Carling, Toggle, SPDT, 2 Position, for Fender®1A, 250V; 3A, 125V. Carling SPDT 2 position toggle switch. Great Fender ground switch replacement.
| $4.25 $3.50 You save: 18% | Click to read more |
 | Wire Stripper/Cutter - Xcelite, 5", with Cushion Grip Handle5" wire stripper & cutter with cushion grip handles.
Features:
- Cuts and strips both solid and stranded wire cleanly, neatly.
- Adjustable screw stop for different wire sizes.
- Hardened with ground blades.
- Red plastic-coated cushion grip provides maximum leverage.
| $9.95 | Click to read more |
 | Lubrication - Dr. Duck's, Ax Wax & String Lube, Organic For use on the entire fretboard, headstock, front,sides, back and pickguards. Also cleans and lubes bridge saddles, fine tuners on locking tremolo systems, tuning machine knobs and posts. US made with US materials, 4 oz. | $7.95 | Click to read more |
 | Wire Stripper/Cutter - Xcelite, 6", with Spring and Lock6" stripper, cutter with spring and lock, cushion grip handles, carded.
Features
- Wire cutting and stripping edges conveniently located in front of pivot
- Allows use in tight places
- Needle nose pliers add wire pulling and bending capabilities
- Scissors-action stripper for cleaner, faster and more accurate stripping
- Serrated edge
- Includes work-speeding automatic spring and lock
- Red cushion grip handle provides maximum leverage
- For copper and aluminum wire 10-20 AWG
| $20.95 | Click to read more |
 | Switch - Pickup Selector, Strat, 5-Way, Black5-way switch for Strats, black tip.
| $6.50 | Click to read more |
 | Screw - 8/32, #10, Reverse Thread, Machine Head (Package of 4)Used with a locking keps nut for speaker mounting. Similar to those used on vintage Fender amps.
- 1" of 8/32" machine head thread
- ¼" of #10 reverse wood thread
- 1 ½" overall length
- Package of 4.
For the corresponding keps nut see P-H264-NUT. | $1.00 $0.80 You save: 20% | Click to read more |
480.820.5411