 | DSP Module - Accutronics, 99 Effects (Reverb, Chorus, Delay, +)The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
- Guitar/ Keyboard/Bass amplifiers and combos
- Audio mixing consoles / Powered mixing consoles
- Stand -alone stereo effect units for studio and PA usage
- Effects pedals
| $32.00 | Click to read more |
 | Flex Tip - Caig, Extension Tube for Perfect-StrawNow you can get into all the hard to reach places with the new CAIG FLEX-TIP™ - Extension Tube for Perfect-Straw™.
- Reduces straw diameter at tip
- Reduces flow
- Flexible - Get to Hard to reach places (1.5" length)
- Fits ALL Perfect-Straw™ Tubes
- Chemically resistant tube
| $1.95 | Click to read more |
 | Potentiometer - CTS, Audio, Knurled Shaft, ¾" BushingCTS Audio, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
- Body Diameter: 24 mm
- Power Rating ¼” watt
- Bushing Diameter: ⅜" (Threading: 3/8-32)
- Bushing Length: 3/4"
- Shaft Diameter: ¼"
- Shaft Length: ⅜"
- Shaft Material: Brass – Knurled Shaft
- Includes (1) Nut and (1) Lock Washer
| $4.95 | Click to read more |
 | Jack - Neutrik, ¼", Enclosed Stereo, Switched, Chrome Ferrule, PC Terminals 1/4" enclosed stereo jack, switched, with chrome ferrule and straight PCB pins, mounting nut included | $1.45 | Click to read more |
 | Potentiometer - CTS, Linear, Knurled Shaft, ¾" BushingCTS Linear, Long Shaft 3/4 in. bushing, split knurled shaft, 3/8 in. bushing diameter. Great in guitars that have a thicker carved top (ex. Les Paul) where added bushing length is required.
- Body Diameter: 24 mm
- Power Rating ¼” watt
- Bushing Diameter: ⅜" (Threading: 3/8-32)
- Bushing Length: 3/4"
- Shaft Diameter: ¼"
- Shaft Length: ⅜"
- Shaft Material: Brass – Knurled Shaft
- Includes (1) Nut and (1) Lock Washer
| $4.95 | Click to read more |
 | Speaker - 12 in, Celestion, Redback, 150WThe G12H-150 Redback has been created for players who are looking for extreme power handling but refuse to compromise on great tone. Rated at a gargantuan 150-watts, the Redback is constructed with a supersized 2-inch voice coil and features the heaviest G12 magnet. The result is a guitar speaker that sounds 100% Celestion in character, yet is primed to withstand a pummeling from a 100-watt head all by itself, and still come back for more.The Redback proves that you no longer need to choose between power and tone. With a tight, well-controlled low end, detailed midrange and more relaxed treble, Celestion’s engineering expertise has produced a truly high power guitar speaker that can still deliver balance, responsiveness and superb playability, with muscular ease.With lower power combos, expect tons of smooth, clean tone and don’t be afraid to plug in your favourite stomp box. Thinking of downsizing your cabinet?
| $169.00 | Click to read more |
 | Integrated Circuit - LM386N-1/NOPBLM386 Low Voltage Audio Power Amplifier The LM386 is a mono low voltage amplifier that can be used in a variety of applications. It can drive loads from 4 Ω to 32 Ω. The gain is internally set to 20 but it can be modified from 20 to 200 by placing a resistor and capacitor between pins 1 and 8. As this is an Op Amp it can be used in different configurations to fit in several applications. The internal gain setting resistor allows the LM386 to be used in a very low part count system. In addition a series resistor can be placed between pins 1 and 5 to modify the gain and frequency response for specific applications. These are found in many small audio amplifiers and even tiny pedal sized guitar amplifiers! There are tons of possibilities for this little Op Amp.
| $1.25 | Click to read more |
 | Chassis Box - Hammond, Unpainted Aluminum, 3.9" x 2.0" x 1.2"- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
| $7.82 | Click to read more |
 | Capacitor - 630V, Polypropylene, radial leadsPolypropylene film capacitor.
- Tolerance: ±10%
- Radial leads
- Voltage rating: 630VDC
| Starting at $0.34 | Click to read more |
 | Chassis Box - Hammond, Unpainted Aluminum, 4.7" x 3.7" x 1.5"- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
| $9.95 | Click to read more |
480.820.5411