You are here

New Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(12 pages)
P-PC-PR1590BBProtoBoard- Fits 1590BB, 1 sided, 2-hole strips
Prototyping circuit board (PCB) designed to fit the Hammond 1590BB die-cast aluminum enclosure. It has a convenient 2-hole pattern, which provides an easy way to connect parts while maximizing usable board area. It can be used as a stand-alone prototyping board, or installed in a Hammond 1590BB enclosure. For fastening your project to a surface see our adhesive standoffs (S-H190-X).
Features:
  • Single-sided high-quality FR4 glass-epoxy circuit board.
  • Convenient 2-hole pattern provides an easy way to connect parts.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
  • 0.042" holes are drilled on 0.1" (2.54mm) centers. 4 mounting holes.
  • PCB Size 3.20 x 4.25 in (81.3 x 108.0 mm)
$5.50
Click to read more about this product.
S-W605ZipWire - 20cm Kit
The ZipWire™ 20cm Kit provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed and the color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow colored ribbon cable provides the 10 standard electrical colors.
The longer 20cm wires are helpful for longer off board connections and also work great for signals within a solderless breadboard such as (P-PC-BB400). When connecting to a group of signals (such as UART or SPI signals), a group of attached ZipWires can be used to keep the signals together to better manage your wiring. ZipWires have 0.1” pitch
Male-male ZipWires can be used with solderless breadboards or 0.1” pitch sockets.
Male-female ZipWires can be used as extension wires to make longer connections
Female-female ZipWires work great on standard square post headers (0.025” square posts on 0.1” centers).
$10.50
Click to read more about this product.
P-PC-ST1StripBoard - Single Sided, Size 1, Uncut
Prototyping circuit board with a standard long strip pattern where tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads and the board has 0.1" hole spacing for DIP integrated circuits/ headers as well as other parts. Higher quality than traditional stripboard, the holes are drilled, not punched. The base material is high-quality FR4 glass epoxy board which has better stability and moisture resistance than boards using phenolic or SRBP (synthetic resin bonded paper), which can warp with exposure to humidity.
These boards are ideal for the hobbyist who is looking to bring pedal designs to life and can be cut to suit your needs.
$2.95
Click to read more about this product.
S-W604ZipWire - 10cm Kit
The ZipWire™ 10cm Kit provides a convenient way to connect the signals in your projects. The wires can be unzipped for individual wires as needed and the color-coding can be used to organize power, ground and other signal types to keep your circuit organized. The rainbow colored ribbon cable provides the 10 standard electrical colors.
The 10cm wires work great for signals within a solderless breadboard such as (P-PC-BB400). When connecting to a group of signals (such as UART or SPI signals), a group of attached ZipWires can be used to keep the signals together to better manage your wiring. ZipWires have 0.1” pitch
Male-male ZipWires can be used with solderless breadboards or 0.1” pitch sockets.
Male-female ZipWires can be used as extension wires to make longer connections
Female-female ZipWires work great on standard square post headers (0.025” square posts on 0.1” centers).
$9.50
Click to read more about this product.
S-TBMA2Bias Master™ - TAD, 2 Octal Probes
Biasmaster Test adapter pair for tubes with octal base,
Octal spare probes (2 pieces = one pair) for use with the BIASMASTER System.
$65.00
On Backorder
Click to read more about this product.
S-TBMA2-EL84Bias Master™ - TAD, 2 Noval Probes
Biasmaster™ Test adapter pair for tubes with noval base.
Spare noval probes (2 pieces = one pair) for use with the BIASMASTER System. Enables measurements on EL84, 6BQ5 etc.
$65.00
Click to read more about this product.
M-PAS-CABLE-5Cable - For Power All Systems, C-GN/R
Included in the Power-All system and also sold separately, the Cable-Green Right Angle jumper allows the user to power Line-6 Stomp-Box modelers and other digital effect units from the PA-9. The Cable-Green features a reverse-polarity (tip positive), right-angle male barrel connector with a larger, 2.5 mm internal diameter and spring-loaded clips.
The Cable-Green/R can be used with Line-6 Modelers, Electro-Harmonix units, and other pedals requiring a larger internal diameter plug.
$3.00
Click to read more about this product.
M-PAS-CABLE-1Cable - For Power All Systems, C-5/R
Right Angle Daisy Chain connector with standard polarity tip negative/barrel positive plugs connects the PA-9 Power-All to five effect pedals. The Cable-5/R can also be used with Power-All jumper cables to power effects that use different style jacks (reverse polarity, phone plug, battery clip, etc.).
You can also link multiple Cable-5/R connectors to power over twenty 9-volt effect pedals or similar devices (actual number of units depends on current draw of individual units used).
Plugs: (5): Diameter 5.5 mm external, 2.1 mm internal. Barrel length: 10 mm. Spring-loaded right-angle male plugs prevent accidental disconnection from power source or pedal.
Cable length: 1397 mm (55”) total, 270 mm (10.5") between jacks.
Whether you’re using our Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$7.50
Click to read more about this product.
M-PAS-CABLE-4Cable - For Power All Systems, C-BL/R
Included in the Power-All System and also sold separately, the Cable-Blue/R features a right-angle jack that allows users to power effect units that use a 1/8" (3.5 MM) phone plug connector with tip-positive polarity. The Cable-Blue/R can be connected to any male jack on the Cable-5 Daisy Chain, or directly to the PA-9 itself.
Note: to achieve tip-negative polarity from the Cable-Blue/R, simply attach a Cable-Red (M-PAS-CABLE-7) in between it and the power source.
Plug: Right-Angle Configuration with 3.5 mm (1/8") W x 15 mm L Phone plug.
Length: 130 mm (approximately 5.25 inches) between plugs
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$3.00
On Backorder
Click to read more about this product.
M-PAS-CABLE-2Cable - For Power All Systems, C-11/R
Designed for larger pedalboards, the Power-All Cable-11/R Daisy Chain features ELEVEN right-angle male barrel plugs with spring loaded jacks for extra secure connections – no more losing power mid-solo! 28-gauge cable with oil-resistant sheath and 10-inch cable length between plugs allows connection of larger and odd-sized pedals.
Plugs: (11): Diameter 5.5 mm external, 2.1 mm internal. Barrel length: 10 mm. Spring-loaded right-angle male plugs
Cable length: 3962.4 mm (approximately 156 inches) total, 270 mm (10.5") between jacks.
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$15.00
Click to read more about this product.

Pages

(12 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - New Products