New Products

Transformer - Power, 120V Primary, 330V / 6.3VCT / 5V Secondary, for Fender® Deluxe 5E3
Power transformer replacement for the Fender® part number 64526 as used in the 5E3 Deluxe Amp. This transformer accounts for modern mains voltage and will provide a B+ voltage of ~370VDC with 120VAC on the primary in a standard 5E3 build paired with the P-TGO-002 output transformer. This upgraded transformer also features a center tap on the 6.3V filament. Features
  • Provides vintage correct DC voltages in stock 5E3 builds
  • 330V (660 VCT) B+ at 120mA
  • Center tapped 6.3V filament at 2A
  • 5V filament supply at 2A
  • For 120V 60Hz primary
  • Standard 2.8125" x 2.25” mounting centers
$89.95
Resistor - W20 Series, Welwyn, 7 Watt, Wirewound
High quality W22 resistors from Welwyn / TT Electronics W20 Series. These 7W wirewound resistors are a great choice for screen grid and cathode bias resistors in tube amplifiers. The brown enamel coating used by Welyn looks great in vintage and vintage-style amps. These resistors can be found in many vintage Marshall amplifiers. A high purity ceramic substrate is assembled with interference fit end caps to which are welded the termination wires.
$1.79
Cable - Switchcraft, Instrument, Molded, Straight to Right Angle, 10’
Vintage style Switchcraft instrument cables that match the original case candy cables sold with 1960s Fender® and Gibson guitars. These use high quality cable with a braided shielding over the 22AWG single conductor with a durable gray PVC outer jacket. The ends feature the classic molded connectors found on the vintage cables. Features
  • Classic Switchcraft Molded ¼” (6.35mm) Connectors
  • Straight to Right Angle
  • Braided Shielding
  • 22AWG Conductor
  • Durable PVC Outer Jacket
  • Vintage Style
$26.95
Capacitor - Vishay Roederstein, 630V, MKT1813, Axial Lead
High quality axial capacitors rated at 630V. These MKT1813 capacitors are produced by Vishay Roederstein, formerly known as ERO. These capacitors are made with metalized polyester film and sealed in epoxy resin. Suggested applications include blocking, bypassing, filtering, timing, coupling and decoupling, interference suppression in low voltage applications. Features
  • Plastic-wrapped, epoxy resin sealed, flame retardant encapsulation
  • Non polar
  • Tubular metalized polyester film construction
  • ±10% tolerance
  • Axial leads
  • Operational life greater than 300,000 hours (40 °C/0.5 UR)
Starting at $1.39
Vibrato Kit - Bigsby, B5, Fender® Logo, for Flat-Top Telecaster Guitars
Bigsby B5 with Fender® Logo kit for Telecaster® guitars. This kit includes every part required to fit an “F” logo B5 to a standard Telecaster® using the Bigsby bridge and bridge plate. The B5, sometimes referred to as the Bigsby "horseshoe" is designed for flat top solid body guitars and attaches via four screws to a guitar's top.
$249.99
Switch - Black Bat, Toggle, SPST, On-Off, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.
$3.75
Switch - Black Bat, Toggle, DPST, On-Off/Off-On, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This DPST switch is rated for 230VAC, 4.5A. When in the up position, the top switch is on and the bottom switch is off. When in the down position, the top switch is off and the bottom switch is on. Includes one hex nut and one knurled nut.
$4.35
Switch - Black Bat, Toggle, 4PST, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This 4PST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.
$5.50
Switch - Black Bat, Toggle, DPST, On-Off/On-Off, Vintage Marshall Style, Solder Lugs
Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. When in the up position, both switches are on. When in the down position, both switches are off. Includes one hex nut and one knurled nut.
$4.95
Knob - Aluminum, Set Screw, Pinched with Line, 0.75" Diameter
Colors Available:
Solid aluminum control knob with set screw. This knob has a pinched grip and is similar in size and appearance to the Davies 1510 but with sharper angles for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.
  • Height: 0.575 in. (14.61 mm)
  • Diameter: 0.75 in. (19.05 mm)
  • Fits ¼" shaft with set screw
$1.89
Capacitor - Jupiter, Cosmos, Wet Electrolytic, Axial Lead
The Cosmos Wet Electrolytic Capacitors present a new axial range from Jupiter Condenser. Inspired from and designs based on early American Wet Electrolytic capacitors used in audio amplifiers, guitar amplifiers, and pro audio applications. Available ranging from 10uF to 250uF and voltages from 25V to 500V
Starting at $4.99
Knob - Aluminum, Set Screw, Chicken Head
Colors Available:
New!:
Solid aluminum knob with a classic chicken head design. This knob has an infilled indicator line and counterbored base to hide potentiometer nuts. Fits 0.25” (6.35mm) shafts.
  • Height: 0.54 in. (13.72 mm)
  • Length: 1.25 in. (31.75 mm)
  • Fits ¼" shaft with set screw
$3.50
Capacitor - CE Mfg., 450V, 200/60 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 200µF@450V, 80µF@450V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 450V, 60/60/40 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 60µF@450V, 60µF@450V, 40µF@450V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 400V, ~\frac{50}{50}~ µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 50µF@400V, 50µF@400V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 200µF@200V, 80µF@350V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 200µF@200V, 80µF@350V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 350V, 60/60/30/30 µF
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 60µF@350V, 60µF@350V, 30µF@350V, 30µF@350V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
Capacitor - CE Mfg., 80µF@350V, 40µF@350V, 40µF@350V, 50µF@50V
CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.
  • 80µF@350V, 40µF@350V, 40µF@350V, 50µF@50V
  • FP / Twist Lock Style. Solder Tabs.
  • -10%, +50% Tolerance, 85°C Temperature Rating.
  • 1 ⅜"D X 3.6"H.
  • All CE Manufacturing can capacitors have a two year warranty against manufactured defects.
$40.95
File - Fret Levelling, Hard Chrome Coated, for Stainless Steel Frets
Hard chrome coated fret file for leveling stainless steel frets. This two sided file features the same cutting pattern on each side.
  • Hard chrome coated
  • Two sided
  • 6.25” x 1” x 0.225”
$39.95
File - Fret Crowning, Hard Chrome Coated, for Stainless Steel Frets
Hard chrome coated fret files for crowing stainless steel frets. Each file features a coarse and fine file indicated by the arrows pointing up and down. The larger arrows point to the coarse side and the smaller arrows point to the fine side. The horizontal arrows indicate the cutting direction of the file.
  • Hard chrome coated
  • Single cut files
  • Coarse and fine included on each file
  • Medium file has a radius of 2mm
  • Jumbo file has a radius of 3mm
$45.95
Screw - 6-32 x ⅝”, Phillips, Round Head, Machine, Nickel-plated
#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on Fender® guitars such as Stratocasters® and Telecasters®.
$3.25
package of 5
Vacuum Tube Retainer - for EL84 Tubes, Marshall Style
Retainer for EL84 tubes. For use with guitar amps and applications where the tube is suspended upside down in the chassis. This style of EL84 retainer was popularly used in vintage 18W Marshall amps. The two brackets mount using the socket’s hardware.
$1.19
On Backorder
Heat Shrink - 2:1, Thin Wall Tubing, Polyolefin, Black
Thin wall heat shrink tubing available in multiple diameters. The flexible yet durable polyolefin material and standard 2:1 shrink ratio make this heat shrink a great option for electrical insulation, cable bundling, and component protection.
  • Operating Temperature: -55°C to +135°C
  • Minimum Shrink Temperature: 70°C
  • Full Recovery Temperature: 100°C
  • UL Approval
  • RoHS Compliant
Starting at $0.35
Sold by the foot
Cable Clamp - Black Nylon, .203” Mounting Hole
Black nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. The ¼ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the RCA reverb tank cables. The 5/16 in. version works well with the S-W125X and S-W132X bare end power cables. See P-HCABLECLAMP-X for white nylon versions of these clamps.
$0.39