New Products

Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This DPST switch is rated for 230VAC, 4.5A. When in the up position, the top switch is on and the bottom switch is off. When in the down position, the top switch is off and the bottom switch is on. Includes one hex nut and one knurled nut.

Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This 4PST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.

Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. When in the up position, both switches are on. When in the down position, both switches are off. Includes one hex nut and one knurled nut.

Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.

Solid aluminum control knob with set screw. This knob has a pinched grip and is similar in size and appearance to the Davies 1510 but with sharper angles for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.

• Height: 0.575 in. (14.61 mm)
• Diameter: 0.75 in. (19.05 mm)
• Fits ¼" shaft with set screw

The Cosmos Wet Electrolytic Capacitors present a new axial range from Jupiter Condenser. Inspired from and designs based on early American Wet Electrolytic capacitors used in audio amplifiers, guitar amplifiers, and pro audio applications. Made in the USA. Available ranging from 10uF to 250uF and voltages from 25V to 500V

Solid aluminum knob with a classic chicken head design. This knob has an infilled indicator line and counterbored base to hide potentiometer nuts. Fits 0.25” (6.35mm) shafts.

• Height: 0.54 in. (13.72 mm)
• Length: 1.25 in. (31.75 mm)
• Fits ¼" shaft with set screw

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.

• 200µF@450V, 80µF@450V
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.
• 1 ⅜"D X 3.6"H.
• All CE Manufacturing can capacitors have a two year warranty against manufactured defects.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.

• 60µF@450V, 60µF@450V, 40µF@450V
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.
• 1 ⅜"D X 3.6"H.
• All CE Manufacturing can capacitors have a two year warranty against manufactured defects.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.

• 50µF@400V, 50µF@400V
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.
• 1 ⅜"D X 3.6"H.
• All CE Manufacturing can capacitors have a two year warranty against manufactured defects.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.

• 200µF@200V, 80µF@350V
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.
• 1 ⅜"D X 3.6"H.
• All CE Manufacturing can capacitors have a two year warranty against manufactured defects.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.

• 60µF@350V, 60µF@350V, 30µF@350V, 30µF@350V
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.
• 1 ⅜"D X 3.6"H.
• All CE Manufacturing can capacitors have a two year warranty against manufactured defects.

CE Manufacturing USA Made Multi Section Can Capacitor. Reproduced to exact Mallory specs using original Mallory machinery.

• 80µF@350V, 40µF@350V, 40µF@350V, 50µF@50V
• FP / Twist Lock Style. Solder Tabs.
• -10%, +50% Tolerance, 85°C Temperature Rating.
• 1 ⅜"D X 3.6"H.
• All CE Manufacturing can capacitors have a two year warranty against manufactured defects.

Hard chrome coated fret files for crowing stainless steel frets. Each file features a coarse and fine file indicated by the arrows pointing up and down. The larger arrows point to the coarse side and the smaller arrows point to the fine side. The horizontal arrows indicate the cutting direction of the file.

• Hard chrome coated
• Single cut files
• Coarse and fine included on each file
• Medium file has a radius of 2mm
• Jumbo file has a radius of 3mm

Hard chrome coated fret file for leveling stainless steel frets. This two sided file features the same cutting pattern on each side.

• Hard chrome coated
• Two sided
• 6.25” x 1” x 0.225”

#6-32 x ⅝” Phillips drive machine screws made of nickel plated steel. This style of round head screw matches the pickup and switch mounting screws found on Fender® guitars such as Stratocasters® and Telecasters®.

Retainer for EL84 tubes. For use with guitar amps and applications where the tube is suspended upside down in the chassis. This style of EL84 retainer was popularly used in vintage 18W Marshall amps. The two brackets mount using the socket’s hardware.

Thin wall heat shrink tubing available in multiple diameters. The flexible yet durable polyolefin material and standard 2:1 shrink ratio make this heat shrink a great option for electrical insulation, cable bundling, and component protection.

• Operating Temperature: -55°C to +135°C
• Minimum Shrink Temperature: 70°C
• Full Recovery Temperature: 100°C
• UL Approval
• RoHS Compliant

Black nylon cable clamps perfect for securing cables to cabinet walls. These clamps feature a .203 in. mounting hole. The ⅜ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the power cord. The ¼ in. diameter cable clamp is commonly used on Fender® amplifiers for securing the RCA reverb tank cables. The 5/16 in. version works well with the S-W125X and S-W132X bare end power cables. See P-HCABLECLAMP-X for white nylon versions of these clamps.

The TAD KT88-STR Redbase® is built in the style of the early British MOV KT88 with the big and heavy glass envelope and beautifully polished metal base. The Redbase® features a gold control grid for outstanding performance and reliable stability. A breath-takingly big and precise tone and great appearance make the new TAD KT88-STR Redbase® the best choice for both, high-end audio applications and powerful bass guitar amps, providing a natural and three dimensional tone with pleasingly full warmth and fine, subtle highs. A very musical response, with great sound and finest details in mids and top-end; a linear and harmonious overall response with a very organic tone, make the TAD KT88-STR Redbase® TAD’s favorite tube in the KT88 and 6550A class.

The new Tube Amp Doctor premium selected 12AX7 /ECC83-WA is a low-noise and low microphonic version of the 12AX7. The ECC83-WA Premium Selected has a balanced tone with a notable emphasis of the mids. The overall linear sound offers great string attack and chord separation. The low end is well defined. The result is a tone that works well in both modern amps but also vintage guitar amplifiers. If the ECC83-WA is used in hi-fi audio amplifiers, the tube adds a musical clarity and presence to the signal. The new TAD™ ECC83-WA is a miniature, high-mu twin triode, selected and recommended for guitar amps to improve overall responsiveness and dynamics. Great for guitar clean tones with a distinct pick attack and pronounced upper mids to cut through every mix. Crunchy tones still feature a very good string separation which is also ideal for fully saturated sounds and modern amplifiers with a tight bass response.

Large rubber grommet for mounting footswitches on FZ-1 and FZ-1A style builds. Requires a 0.812” (20.6mm) mounting hole. This grommet’s 0.5” (12.7mm) inner diameter fits most common footswitches. These are great for replacing originals, replica builds of these Maestro pedals or for general sound damping on footswitches.

Metal stamp set with 27 stamps for the letters A through Z and an ampersand. The height of the stamped letter is 0.125”. These stamps mark single characters by indenting the mark into the surface of a material. The process is simple, requiring only a hammer to strike the stamp onto the material. This stamp set is a great tool for adding control labels to projects such as pedal enclosures.

Metal stamp set with nine stamps for the numbers 0 through 9. The 6 stamp is also used for 9. The height of a stamped numeral is 0.125”. These stamps mark single characters by indenting the mark into the surface of a material. The process is simple, requiring only a hammer to strike the stamp onto the material. This stamp set is a great tool for adding control labels to projects such as pedal enclosures.