You are here

New Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(18 pages)
P-A-G12H-150Speaker - 12 in, Celestion, Redback, 150W
Multiple Options Available

The G12H-150 Redback has been created for players who are looking for extreme power handling but refuse to compromise on great tone. Rated at a gargantuan 150-watts, the Redback is constructed with a supersized 2-inch voice coil and features the heaviest G12 magnet. The result is a guitar speaker that sounds 100% Celestion in character, yet is primed to withstand a pummeling from a 100-watt head all by itself, and still come back for more.The Redback proves that you no longer need to choose between power and tone. With a tight, well-controlled low end, detailed midrange and more relaxed treble, Celestion’s engineering expertise has produced a truly high power guitar speaker that can still deliver balance, responsiveness and superb playability, with muscular ease.With lower power combos, expect tons of smooth, clean tone and don’t be afraid to plug in your favourite stomp box. Thinking of downsizing your cabinet?


$169.00
Click to read more about this product.
P-QLM386N1Integrated Circuit - LM386N-1/NOPB

LM386 Low Voltage Audio Power Amplifier The LM386 is a mono low voltage amplifier that can be used in a variety of applications. It can drive loads from 4 Ω to 32 Ω. The gain is internally set to 20 but it can be modified from 20 to 200 by placing a resistor and capacitor between pins 1 and 8. As this is an Op Amp it can be used in different configurations to fit in several applications. The internal gain setting resistor allows the LM386 to be used in a very low part count system. In addition a series resistor can be placed between pins 1 and 5 to modify the gain and frequency response for specific applications. These are found in many small audio amplifiers and even tiny pedal sized guitar amplifiers! There are tons of possibilities for this little Op Amp.


$1.25
Click to read more about this product.
P-H1590G2Chassis Box - Hammond, Unpainted Aluminum, 3.9" x 2.0" x 1.2"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$7.57
Click to read more about this product.
C-LCapacitor - 630V, Polypropylene, radial leads
Multiple Options Available

Polypropylene coupling capacitor, ±10% tolerance, radial leads. 630 Volts.


$0.34
Starting at $0.29
You save: 15%
Click to read more about this product.
P-H1590BB2Chassis Box - Hammond, Unpainted Aluminum, 4.7" x 3.7" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$9.63
Click to read more about this product.
R-VPV-1MA-SPDPot - Peavey, 1 Meg Audio, Spider

Peavey 1 Meg Audio Potentiometer, Spider Style PC Mount Terminals



  • Body Diameter: 16mm
  • Bushing Diameter: 7mm
  • Bushing Length: 5mm
  • Shaft Diameter:4.5mm
  • Shaft Length:10mm
  • Shaft Material: Aluminum – Knurled Split Shaft

$4.25
Click to read more about this product.
S-H960Bezel - Cliff, Black for S4 Jack Socket

Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.


$0.20
Click to read more about this product.
P-H1590B3Chassis Box - Hammond, Unpainted Aluminum, 4.6" x 3.0" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$8.47
Click to read more about this product.
P-H543Switch - Carling, Mini Toggle, DPDT, ON-OFF-ON

Genuine Carling 3 Position Mini Toggle, ON-OFF-ON, Round Bat Features:



  • DPDT( Double Pole/Double Throw) On-Off-On switch
  • 0.354" bushing length
  • 0.415” bat length
  • ¼" mounting hole diameter
  • Solder lugs
  • Nuts, washer, and lock washer included

$3.50
Click to read more about this product.
P-H544Switch - Carling, Mini Toggle, SPDT, ON-ON, Right Angle, PC Mount

Genuine Carling 2 Position Mini Toggle, ON-ON, Short Round Bat, Right Angle, PC Mount Features:



  • SPST ( Single Pole/ Double Throw) On-On switch
  • 0.275" bushing length
  • 0.270” bat length
  • ¼" chassis hole diameter
  • Right angle, PC Mount terminals

$2.50
Click to read more about this product.

Pages

(18 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - New Products