You are here

New Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(18 pages)
S-H190-XStandoff - 0.18", Adhesive
Multiple Options Available

Low-profile adhesive standoffs with a 0.180" standoff height that securely attaches your PCB to a flat surface. The post inserts into a 0.125” mounting hole and includes a locking tab that secures the PCB when inserted. It can be used with 1/16” or 1/32” thick PCBs. The 0.6 x 0.6” square base is offset to allow the base to be underneath the board when the mounting hole is close to the PCB edge and the offset base provides a large sticking surface while permitting the PCB to be mounted in tight spaces or close to walls. This can be useful when working with small enclosures. High-quality 3M™ brand double-sided tape secures the standoff to a flat surface. These standoffs are available in packs of 8, 24, or 100 pieces Features:



  • Low profile 0.180" standoff height.
  • Offset base allows use when holes are close to the PCB edge.

Starting at $2.25
Click to read more about this product.
S-F506XAdhesive - Bob Smith Industries, Insta-Set Foam, Pump Spray
Multiple Options Available

Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.



  • Convenient pump spray (2oz.

Starting at $5.95
Click to read more about this product.
P-H1590BBCE-XChassis Box - Diecast Aluminum, Colored
Colors Available:

Cool chassis box perfectly suited for effects pedals and other DIY projects.



  • 4.67" x 3.68" x 1.18"
  • Die-Cast Aluminum
  • Includes Box, Lid, And Screws
  • Painted

$9.25
Click to read more about this product.
P-GP-COV-1NPickup Cover - 50mm, Nickel

Nickel pickup cover used when winding your own humbucker sized pickups or for covering previously uncovered pickups to give them that sleek nickel look. These covers are plated and polished to a beautiful shine and feature a vintage style spacing.



  • 50mm/1.95” vintage style spacing(outer holes center to center)
  • Nickel plated
  • Overall measurements:70mm/2.76” Length x 39.7mm/1.56” Width x 16.8mm/.66” Height
  • Sold individually

$8.95
Click to read more about this product.
P-GTMH09Tuner - Original Fender®, Affinity Strat, Chrome
Genuine Fender/ Squier Chrome Plated Tuner Set, Six-In-Line. '99-'06 Affinity Strat

  • Stamped casing with diagonal mounting holes
  • Press fit bushings and mounting screws included
  • Oval button
$9.59
On Backorder
Click to read more about this product.
W-SC-W11Switch - Switchcraft, Slide, DPTT, 3-Position
Genuine Switchcraft® DPTT 3-position slide switch for use on Mustang and Duosonic style guitars. This switch can be wired to operate in either On/Off/On or On/On/On configurations. Upgrade cheap or malfunctioning switches with these high quality replacements.
  • Recommended .75 control cavity depth
  • 1.406” center-to-center mounting hole spacing
  • #4-40 screws recommended for mounting
  • Screws not included
$4.50
Click to read more about this product.
P-H1455N2201BUEnclosure - Hammond, Extruded Aluminum, 8.66"x4.06"x2.09", Blue

Hammond extruded aluminum enclosure, blue anodized finish. This genuine Hammond enclosure is great for a wide variety of projects from effects pedals to small preamp/compressor builds. Internal slots make this enclosure ideal for projects that will have multiple pc boards mounted internally.



  • Designed to house P.C. boards or for equipment interfacing.
  • Sized for standard Eurocards.
  • P.C.

$25.98
Click to read more about this product.
W-SC-W10Switch - Switchcraft®, Slide, DPDT, Jazzmaster/Jaguar

Genuine Switchcraft® DPDT 2-position slide switch for use on Jazzmaster and Jaguar style guitars. Upgrade cheap or malfunctioning switches with these high quality replacements.



  • Recommended .75 control cavity depth
  • 1.125” center-to-center mounting hole spacing
  • Screws not included

$2.95
Click to read more about this product.
P-GH-BST-CBridge - Hipshot, Supertone Bass, Chrome
Breathe new life into your Gibson bass with the new completely redesigned Hipshot SuperTone Bass Bridge. A direct replacement unit for your Gibson 3 point bass bridge that uses your existing hole pattern. Machined out of solid aircraft quality aluminum, the Hipshot SuperTone features complete adjustability that is easy to use: precise intonation, independent string height,string thru or top load option, and even side- to- side string spacing adjustment. Most important of all, TONE, PUNCH and SUSTAIN that will knock your socks off! Unleash the tone that is trapped in your bass with the new Hipshot Supertone Bass Bridge!
Metric and Standard mounting screws included.
*To achieve maximum tonal transference, the SuperTone is solidly fastened to your instrument. A very slight shadow of the bridge footprint may result.
$108.00
Click to read more about this product.
P-GH-UL-2CTuner - Hipshot, ultra lite Clover key, ½" nickel
Multiple Options Available

Heavy zinc bass tuners add unnecessary weight to your headstock, straining your neck and shoulder. It also restricts your left hand to holding up an unbalanced instrument, robbing you of the necessary freedom of motion so essential to a natural, relaxed playing technique. Don’t carry the weight of the world on your shoulders! Hipshot’s Ultralight Bass Tuning Machines are made of durable, precision machined aircraft-quality aluminum to lighten your load, and give you the correct instrument balance without sacrificing tuning accuracy or durability.



  • Fits basses with a headstock hole size of 11/16 inch
  • Available in treble or bass orientation
  • Sold individually

$24.95
Click to read more about this product.

Pages

(18 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - New Products