You are here

New Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(23 pages)
P-C159YFilter Choke - Hammond, Open Bracket, 0.6 H, 750 mA
  • Economical “open bracket” - channel mount.
  • Tolerance of 15% on both inductance & resistance.
  • Inductances measured at rated D.C. current.
  • Minimum 5” long leads.
  • Units will exhibit less inductance at slightly higher currents or more inductance at lower currents.
  • Perfect for high voltage power supply filtering.
  • Every unit is Hipot tested (100%) at 1,500 VAC
  • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.


Inductance (± 15%) 0.6H D.C. Current 750 ma. Resistance (± 15%) 11 ohms Maximum Operating Volt (D.C.) 500V


$28.34
$24.94
You save: 12%
Click to read more
S-HCN1024Nut - Cage, Zinc, 10/24, Electroplate Panel Range .064-.105

Common replacement for many applications. The nut is free floating and will help to take care of problems with misaligned holes. Convenient cage design stops the nut from moving while tightening.



  • 10-24 Threading
  • Panel Range .064-.105
  • Zinc Finish
  • Sold Individually

$0.60
$0.53
You save: 12%
Click to read more
W-AM-TM1RBJPlug - Amphenol, ¼", Right Angle, Switched, black nickel

Amphenol right-angle ¼” mono SwitchPlug with black finish and large jaws cable clamp (used for cable OD 5.5mm to 6.5 mm). The Amphenol T series SwitchPlug uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals. The sliding ring contact self-cleans every time the plug is connected preventing excessive build up of oxidization and contamination. Activation is directly off the jacks full front face assuring a positive reference point every time, and as it works instantaneously on the main circuits there is no need for the use of magnets or other elaborate switching mechanisms. WARNING! For use with instrument (guitar) applications only


$9.95
$8.76
You save: 12%
Click to read more
P-GP100Pickup Part - Black bobbin, 7-string, screw side

Black humbucker bobbin for building or repairing 7-string pickups. Compatible with our 7-string baseplate (P-GP-PLATE-3)



  • Screw side bobbin
  • 61.2mm/2.40” pole spacing(outer holes center to center)
  • Sold individually

$1.50
$1.32
You save: 12%
Click to read more
P-GP-PLATE-2Pickup Part - Base Plate, Tele Bridge, Steel, Copper Plated

Copper plated steel baseplate for building a Telecaster bridge pickup or repairing a vintage original.



  • .04” copper plated steel
  • 6-32 mounting screw thread
  • Sold individually

$2.95
$2.60
You save: 12%
Click to read more
P-GP101Pickup Part - Black bobbin, 7-string, slug side

Black humbucker bobbin for building or repairing 7-string pickups. Compatible with our 7-string baseplate (P-GP-PLATE-3)



  • Slug side bobbin
  • 61.2mm/2.40” pole spacing(outer holes center to center)
  • Sold individually

$1.50
$1.32
You save: 12%
Click to read more
S-H119Screws - Fender®, Bridge Height Screws
Set of hex set screws used for saddle-height adjustment on American Vintage series Stratocaster and Telecaster bridges.
• Set of 12 hex set screws
• For American Vintage Stratocaster and Telecaster guitars
$4.79
$4.22
You save: 12%
Click to read more
P-GV5-ST-LHVibramate - V5 Short Tail, Left-Handed, for Bigsby B5
Colors Available:

Vibramate Short Tail V5 Adaptor Mounting Kit, Left Handed, For Bigsby B5 The Vibramate Left Handed V5 Short Tail Mounting Kit is the same as the Original V5 kit but designed for tighter locations such as the SG Classic style guitars that feature a larger pickguard and require a left handed orientation. The Vibramate V5 is for mounting a Bigsby B5 Original Vibrato and will fit most traditional style guitars that have a tune-a-matic style bridge and a stop-tailpiece. The kit installs in minutes with the included hardware and eliminates the need for drilling permanent holes in your instrument. Vibramate comes with 3 felt-pads secured to the bottom of the mounting plate for a soft touch to the top of your guitar.


$80.95
Starting at $53.68
You save: 34%
Click to read more
P-GTNN-ZBXNut - Gold Tone, Zero Glide Blank (Unslotted)
Multiple Options Available

The Zero Glide® Replacement Nut System borrows the “zero fret” concept to reduce string contact in the nut by up to 93%, increasing tuning stability, playability, and open string tone. It only take a few minutes to install with absolutely no permanent alteration to your instrument. Zero fret wire included.


$24.00
$21.12
You save: 12%
Click to read more
C-ET70-100Capacitor - Axial Lead Electrolytic, 70µF, 100VDC

High quality low leakage axial lead electrolytic capacitor



  • 70uF/100V
  • Rated for 85° C operation
  • Tolerance: -20%, +50%
  • Measures 0.51" dia. x 0.84" length

$0.55
$0.48
You save: 13%
Click to read more

Pages

(23 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - New Products