You are here

New Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(15 pages)
S-CAX1W-20Axe wipes - Caig, metal string cleaner, package of 20
Axe Wipes - Metal string cleaner. Pack of 20, individually wrapped
Get better sound quality from ALL your strings
Cleaner, lubricant and protectant for metal strings
  • Prolongs life of metal strings
  • Improves sound quality
  • Dissolves oxidation and corrosion
  • Protects against acid from hands
  • Lubricates for fast / smooth movement
  • Safe to use. No waxy buildup. Contains no teflon, silicone or solvents
  • Package of 20

Use on all metal musical instrument strings;
guitars, banjo, violin, autoharp, hammer dulcimer, mandola, pedal steel, zither, etc.
$13.95
Click to read more about this product.
R-VPSH-500KLPotentiometer - 500K, Linear, Knurled Shaft, DPDT, Push-Push
Potentiometer - 500K, Linear, Knurled Shaft, DPDT, Push-Push

  • DPDT Push-Push switch
  • ¼" split knurled shaft
  • Audio taper
  • 3/8-32 threads
  • 16mm body diameter (widest point on switch body 17.8mm)
  • .40" bushing length
  • 38"-.52" shaft length.
$9.50
Click to read more about this product.
P-H604Switch - Footswitch, SPST, Momentary, Solder Lugs, Soft Switch

SPST(single pole,single throw) normally open (off-on) momentary foot switch. Solder lugs, soft switching. These high quality switches are great for upgrading the footswitch in relay based pedals as well as tap tempo applications. Depressing the switch shorts the lugs together and when the switch is released it returns to it’s non connected state with no click.



  • SPST momentary switch
  • Soft, silent switching with no click
  • Normally open operation
  • Solder lugs
  • Nuts and washer included

$2.50
Click to read more about this product.
S-F506XAdhesive - Bob Smith Industries, Insta-Set Foam, Pump Spray
Multiple Options Available

Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.



  • Convenient pump spray (2oz.

Starting at $5.25
Click to read more about this product.
S-F504XAdhesive - Bob Smith Industries, Maxi-Cure Extra Thick Cyanoacrylate
Multiple Options Available

Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)



  • Extra thick, gap filling consistency
  • 10-25 second cure time
  • For looser fitting applications where a low viscosity glue is required
  • Available in 1oz. and 2oz. sizes


WARNING*: These products are eye and respiratory irritants. Product can bond skin instantly.


Starting at $5.25
Click to read more about this product.
S-F502XAdhesive - Bob Smith Industries, Insta-Cure + Gap Filling Cyanoacrylate
Multiple Options Available

Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!


Starting at $5.25
Click to read more about this product.
P-PC-PAD1PadBoard - Size 1, Double Sided, Plated Holes

Prototyping circuit board that has a general purpose pad-per-hole pattern making it great for general purpose analog and digital use. It is a double-sided board with plated holes, which allows components to be easily soldered to either side of the board. A square pad is provided every 5th hole, which makes it easy to align components on the top and bottom of the board. An anti-tarnish coating protects the copper for a long shelf-life and provides easy soldering.



For fastening your project to a surface see our adhesive standoffs (S-H190-X)



Features:



  • Pad-per-hole prototyping board with plated-thru holes. A square pad every 5th hole makes it easy to align components on top and bottom.
  • Double-sided high-quality FR4 glass-epoxy circuit board with plated holes. Components can be soldered to either side.
  • 1oz/ft2 copper with an anti-tarnish coating for easy soldering.
  • 31 x 19 holes, 0.037" holes are drilled on 0.1" (2.54mm) centers. Four 0.125” mounting holes.
  • Size 1 = 1.97 x 3.15in (50 x 80mm), 1/16" thick (1.6mm)

$2.95
Click to read more about this product.
S-CD5S-6PDeoxIT - Caig, D5 Spray, Perfect Straw

DeoxIT® D-Series - Contact Cleaner & Rejuvenator with NEW Perfect-Straw™ nozzle. Never lose your straw again! More than a Contact Cleaner . . . Chemically Improves Connections (without harm to metals and plastics) DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts. Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.


$13.95
Click to read more about this product.
K-JRG01-KITKit - BusBoard, Junior Genius Blinky Lights Kit
Junior Genius Kits are built for experimentation, learning and fun! Experience the joy of seeing your first LED light up. The Blinky Lights Kit leads you through 10 core activities, from a simple LED circuit up to more advanced transistor LED blinky light circuits, using standard parts on a real-world breadboard.
Learn about voltage and current by using LEDs, resistors, capacitors and transistors. You'll be able to build circuits using a schematic diagram, and there's plenty of help to get you there. Simple examples make it easy to grasp the basics and 'What's Happening' and 'Things To Try' sections encourage you to dig deeper.
You will get valuable assembly and troubleshooting experience as you learn to use a great experimentation tool, the solderless breadboard. Real hands-on experience means greater educational value.
This next-generation science kit doesn’t seal the parts into simplified plastic blocks.
$23.95
Click to read more about this product.
S-F500XAdhesive - Bob Smith Industries, Insta-Cure Super Thin Cyanoacrylate
Multiple Options Available
Bob Smith Industries™ Insta-Cure™ Super Thin Cyanoacrylate. A must have for luthiers!

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds (1-3 sec.). Surfaces to be bonded must be tight fitting (no visible gaps) and should be held together or clamped while you apply the CA around the edges of the seam.

For glue applications with small gaps or looser fitting joints the higher viscosity Insta-Cure+™ is recommended.

  • Water-thin consistency
  • 1-3 second cure time
  • For tight fitting applications
  • Available in 1oz. and 2oz. sizes


WARNING: These products are eye and respiratory irritants. Product can bond skin instantly. Keep away from children!
Starting at $5.25
Click to read more about this product.

Pages

(15 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - New Products