You are here

New Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(19 pages)
G-876T-Shirt - Black, Abstract Equation for Power
Multiple Options Available
Abstract equation for power, available in:
  • Medium
  • Large
  • X-Large
  • XX-Large
Starting at $9.95
Click to read more
C-G-100Capacitor - Orange Drop, 100V, Polyester
Multiple Options Available

Orange Drop 225P series Polyester film/foil capacitors, 100v, 10% tolerance. The 225P series capacitors in 100v rating are ideal for work in guitar wiring where a smaller footprint is needed to fit in the tight spaces often found in instrument control cavities. With over 35 years of proven dependability in the guitar and amp world you can count on Orange Drop caps to get you the tone you’re looking for. Features:



  • Non- inductively wound polyester film/foil construction
  • Radial lead
  • 10% tolerance
  • 100v voltage rating
  • Rated for 85°C operation
  • Tinned copper-clad steel leads

Starting at $1.65
Click to read more
T-12BH7-A-JJ12BH7-A - JJ Electronics

The JJ Electronic 12BH7-A preamp tube is a great choice for Ampeg SVT amps and the Blackstar HT-5 plus others. A favorite in many hi-fi applications.


$15.95
Click to read more
R-VPSH-500KL-LPotentiometer - 500K, Linear, Knurled Long, DPDT, Push-Push

Potentiometer - 500K, Audio, Knurled Shaft, DPDT, Push-Push, Long Shaft



  • DPDT Push-Push switch
  • ¼" split knurled shaft
  • Linear taper
  • 3/8-32 threads
  • 16mm body diameter (widest point on switch body 17.8mm)
  • 75" bushing length
  • 38"-.52" shaft length.

$10.95
$9.95
You save: 9%
Click to read more
P-A-HEMPDOG-8Speaker - Eminence, 12", Pete Anderson, HempDog, 150W, 8Ω

Multi-platinum, Grammy Award-winning producer/guitarist Pete Anderson wanted to combine the tonal characteristics from two of his favorite Eminence speakers into a single 12” model. The HempDog 12 borrows the warmth from the Cannabis Rex, and the neutral, clear tone from the Legend EM12. “The creation of the HempDog has exceeded my expectations. It has the hi-fidelity I require plus the warmth of hemp, an outstanding combination that covers all genres of music.” – Pete Anderson


$119.99
On Backorder
Click to read more
P-A-G12-NEOSpeaker - Celestion, G12 Neo Creamback, 12"
Multiple Options Available

The Neo Creamback is every ounce a Classic Celestion, delivering all the magical tone you’d get from a traditional Creamback. The difference is, it’s built with a neodymium magnet: making this speaker around half the weight of a traditional ceramic magnet speaker.Celestion’s engineers have developed a new and innovative way to better harness the mighty forces of the neodymium magnet, enabling us to create a guitar speaker that can deliver authentic Creamback tone with ease, while preserving the benefit of neodymium’s much lighter weight.You still get the low end punch, warm, vocal midrange and sweet refined highs the Creamback is famous for: push it hard and enjoy the ‘race-car growl’ that sets pulses racing.


$169.00
Click to read more
R-VPSH-500KLPotentiometer - 500K, Linear, Knurled Shaft, DPDT, Push-Push

Potentiometer - 500K, Linear, Knurled Shaft, DPDT, Push-Push



  • DPDT Push-Push switch
  • ¼" split knurled shaft
  • Linear taper
  • 3/8-32 threads
  • 16mm body diameter (widest point on switch body 17.8mm)
  • .40" bushing length
  • 38"-.52" shaft length.

$9.50
$8.95
You save: 6%
Click to read more
S-F504XAdhesive - Bob Smith Industries, Maxi-Cure Extra Thick Cyanoacrylate
Multiple Options Available

Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)



  • Extra thick, gap filling consistency
  • 10-25 second cure time
  • For looser fitting applications where a low viscosity glue is required
  • Available in 1oz. and 2oz. sizes


WARNING*: These products are eye and respiratory irritants. Product can bond skin instantly.


Starting at $5.50
Click to read more
S-F502XAdhesive - Bob Smith Industries, Insta-Cure + Gap Filling
Multiple Options Available

Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!


Starting at $5.50
Click to read more
P-PC-BB400BreadBoard - Solderless, 400 point pattern

Solderless (plug-in) breadboard with 400 connection tie-points (i.e. 400 wire insertion holes) and 4 power rails. Solderless breadboards are great for building and testing new circuits because parts can be easily inserted and removed making them completely re-usable. This breadboard has a 300 tie-point IC-circuit area plus four 25 tie-point power rails. The housing is made of white ABS plastic, with a printed legend giving numbers and letters for columns and rows. The internal contacts are phosphor bronze with a plated nickel finish and a peelable adhesive tape backing is provided for attaching it to a surface. Be sure to check out the Zipwire™ jumper wire kits for use with this breadboard.


$4.75
Click to read more

Pages

(19 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - New Products