You are here

New Products

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(20 pages)
R-VC500KA-DPDT-LSPot - CTS, 500K Audio, DPDT, .75" Bushing

Add a switch to your guitar using the existing holes in your pick guard or body. High quality CTS Push/Pull DPDT switches can be used to add phase switching, coil tapping, series/parallel, etc. to your guitar without having to drill the holes for a mini switch. The shorter body height and side mounted contacts require far less space (1” depth ) making them ideal for thinner bodied guitars with a more shallow body cavity. These Split-shaft pots are compatible with 24- spline, fine knurled knobs and feature a precise audio taper. Hex nuts, flat washer, and lock washer are included with each pot. CTS DPDT pots are available in three types for different applications. Common uses are as follows:



  • 500K pots are commonly used when wiring humbuckers.
  • 250K pots are commonly used when wiring single-coil pickups
  • 500K long-shaft pots are commonly used when wiring carved top solid body guitars

$7.95
Click to read more about this product.
T-12AX7-TUNG-X12AX7 - Tung-Sol
Multiple Options Available

Russian made reissue of the original Tungsol. The Ultimate 12AX7. Big, warm, and musical. High Gain, ultra-low microphonics, and superb linearity with a dynamic 3-D sound. Available with gold pins.


Starting at $14.95
Click to read more about this product.
M-MG100Effects Pedal - MG Music, Fuzzyland, Fuzz Pedal
Hendrix's Eletric Ladyland LP was our main influence when creating this pedal, we wanted our fuzz to have the tone as close as possible from the one used by Hendrix, and we got pretty close!
Fuzzyland is a positive ground fuzz with a pair of the good old germanium Mullard AC 128. Volume and gain is all you need and if you turn the volume down in your guitar you'll find many other tones.
$160.00
Click to read more about this product.
M-PAS-CABLE-3Cable - For Power All Systems, C-BK/R
Included in the Power-All System and also sold separately, the Cable-Black/R allows the user to power over-sized effect units or units w/AC jacks in hard-to-reach places off of the Power-All Daisy Chain. The Cable-Black can be connected to any plug on any Power-All daisy chain, or directly to the PA-9 itself.
Plug: 5.5 mm W x 10 mm L with 2.1 mm internal diameter and spring-loaded plug.
Length: 267 mm (approximately 10.5 inches) between plugs.
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$2.75
Click to read more about this product.
M-PAS-CABLE-4Cable - For Power All Systems, C-BL/R
Included in the Power-All System and also sold separately, the Cable-Blue/R features a right-angle jack that allows users to power effect units that use a 1/8" (3.5 MM) phone plug connector with tip-positive polarity. The Cable-Blue/R can be connected to any male jack on the Cable-5 Daisy Chain, or directly to the PA-9 itself.
Note: to achieve tip-negative polarity from the Cable-Blue/R, simply attach a Cable-Red (M-PAS-CABLE-7) in between it and the power source.
Plug: Right-Angle Configuration with 3.5 mm (1/8") W x 15 mm L Phone plug.
Length: 130 mm (approximately 5.25 inches) between plugs
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$2.75
Click to read more about this product.
M-PAS-CABLE-5Cable - For Power All Systems, C-GN/R
Included in the Power-All system and also sold separately, the Cable-Green Right Angle jumper allows the user to power Line-6 Stomp-Box modelers and other digital effect units from the PA-9. The Cable-Green features a reverse-polarity (tip positive), right-angle male barrel connector with a larger, 2.5 mm internal diameter and spring-loaded clips.
The Cable-Green/R can be used with Line-6 Modelers, Electro-Harmonix units, and other pedals requiring a larger internal diameter plug.
$2.75
Click to read more about this product.
M-PAS-CABLE-7Cable - For Power All Systems, C-R/R
Included in the Power-All System and also available separately, the Cable-Red/R allows the user to power effect units that have reverse polarity barrel connectors (tip positive/barrel negative). The Cable-Red/R features a tip positive, male barrel connector that is spring-loaded to prevent disconnection.
The Cable-Red/R can be hooked to any plug on any of the Power-All daisy chains, or directly to the Power-All.
Length: Cable-Red/R is 140 mm (approximately 5.5 inches) in length from plug to plug.
Whether you’re using the Power-All digital Power Supply or another manufacturers’ multi-output power brick, Power-All cables are the best way to assure that your pedals are getting the power they need - when and where they need it.
$2.95
Click to read more about this product.
K-978Effects Pedal Kit - MOD® Kits, Step Ladder, Input Attenuator

The Step Ladder is a passive input attenuator using high quality components for excellent reliability. True-bypass mode provides the maximum signal level. The attenuator pot and two toggle switches allow for flexibility in the amount of signal attenuation when not in bypass mode. Treble bleed capacitors in the circuit retain crisp high frequencies even at maximum attenuation. The Step Ladder is ideal for anything from getting a slight boost while playing single-note acoustic guitar leads or for jumping from clean to overdrive in a high-gain electric guitar amp.


$36.95
Click to read more about this product.
P-GRV-GP900Gift Set - Grover, for Electric Guitarist
Contains: 1 electronic tuner, 1 Ultra-Capo, 2 strap locks, 3 medium shell guitar picks.
$21.95
Click to read more about this product.
K-MOD103Effects Kit - MOD® Kits, The Wave, Spring Reverb

The Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The "dwell" control adjusts the input signal level driving the tank and the "reverb" control adjusts the level of output reverberations from the tank. The Wave's all tube design utilizes four dual triode vacuum tubes - three 12AX7s and one 12AT7 - and comes with a MOD® three-spring reverb tank.


$275.00
Click to read more about this product.

Pages

(20 pages)
Subscribe to RSS - New Products