Clearance Items

Capacitor - 100V, Ceramic Disc, ± 10%
100 V ceramic disc capacitors. ± 10% tolerance.
Starting at $0.25
Patch Cables - 3.5mm, Mono
Colors Available:
Low cost, high quality 3.5mm patch cables in a variety of lengths and colors. The cables are super flexible, have a great droop, and are shipped coiled so no permanent kinks are formed. With the large selection of lengths and colors, these cables are the perfect choice for any sized system.
Starting at $1.11
Save 20%
Originally: $1.39
Partially Out of Stock
Vacuum Tube - EF806 / EF86 / 6267, JJ Electronics, Long Plate
The JJ Electronic EF806S is a high quality reproduction of the classic EF86. This pentode features a robust construction with the internal shielding used in the original tubes. The JJ EF806 can be used in any EF86 circuit including microphones and amplifiers.
Starting at $43.25
Screw - M3, Phillips, Pan Head, Machine
Phillips panhead machine screw, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. See S-HS-M3-6-X for colored 6mm M3 screws.
Starting at $0.75
package of 5
Transformer - Hammond, High Voltage Plate & Filament, Vertical mount
  • Vertical Mount. For Horizontal Mount, see P-T263-Z
  • Primary 115 VAC, 60 Hz. - except as noted
  • Enclosed, 4 hole, chassis mount.
  • Minimum 6" long leads.
  • Units can be run full wave bridge or full wave C.T.
  • Class A insulation (105 degrees C).
  • Hi-Pot test of 2,000V RMS.
  • Conservative designs - CSA certified (209651).
Starting at $64.90
Save 7%
Originally: $69.95
Note: P-T274AX: 720 V C.T. @ 138 mA is a special order item.
Bumper - Morley, tapered rubber feet, self adhesive
Small tapered rubber feet with self-adhesive backing (package of 20). Can be used to provide grip and slight elevation (about 0.14") when secured to most project enclosures. Great for effects pedals and rack mount units when removed from the rack.
$5.00
package of 20
Solder - Kester, 60 / 40, 44 Flux, 66 Core, .031 Dia, .5 oz
Kester 44 60/40 rosin core type. .031" diameter, 0.5 oz
$8.85
Cover - Humbucker, Open, Nickel Silver, USA
Colors Available:
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have no holes.
Starting at $8.75
Fret Wire - 18% Nickel-Silver, 2 ft lengths, Medium sizes
High quality 18% Nickel-Silver fret wire in medium sizes.
  • 2.3mm - 2.4mm Crown Widths, (0.091" - 0.095")
  • 1.1mm - 1.3mm Crown Heights, (0.043" - 0.051")

Straight 2ft lengths sold individually or by the pound. For additional sizes and options please see:
  • Small Sizes - P-GTFW-S-X
  • Jumbo Sizes - P-GTFW-J-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-M-1 2.3 mm (0.091") 1.1 mm (0.043") 2.6 mm (0.102") 0.65 mm (0.026") 0.95 mm (0.037") A popular medium size for electric guitars P-GTFW-M-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.60 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-M-3
Starting at $5.95
Partially Out of Stock
Fret Wire - Stainless Steel, 2 ft lengths, various sizes
High quality stainless steel fret wire available in popular sizes.
Straight 2ft lengths sold individually or discounted by the pound.
Per pound quantities


SKU
Qty
Price


P-GTFW-STEEL-1
32
PRICE


P-GTFW-STEEL-3
22
PRICE


For standard 18% Nickel-Silver options please see:
  • Small Sizes - P-GTFW-S-X
  • Medium Sizes - P-GTFW-M-X
  • Jumbo Sizes - P-GTFW-J-X



SKU
Crown Width
Crown Height
Total Height
Tang Width
Stud Width
Additional Info


P-GTFW-STEEL-1
2.0 mm (0.079")
1.0 mm (0.039")
2.8 mm (0.110")
0.6 mm (0.024")
0.95 mm (0.037")
Similar size to Dunlop 6260, Stew Mac 147, commonly used on Vintage Fender, Banjos, Pre-War Gibsons


P-GTFW-STEEL-3
2.7 mm (0.106")
1.4 mm (0.055")
3.2 mm (0.126")
0.6 mm (0.024")
0.95 mm (0.037&qu
Starting at $6.35
Partially Out of Stock
Fret Wire - 18% Nickel-Silver, 2 ft lengths, Jumbo sizes
High quality 18% Nickel-Silver fret wire in jumbo sizes.
  • 2.6mm - 3.0mm Crown Widths, (0.102" - 0.118")
  • 1.0mm - 1.45mm Crown Heights, (0.039" - 0.057")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-J-1 28 PRICE P-GTFW-J-2 26 PRICE P-GTFW-J-3 25 PRICE P-GTFW-J-4 22 PRICE P-GTFW-J-5 18 PRICE P-GTFW-J-6 21 PRICE P-GTFW-J-7 19 PRICE For additional sizes and options please see:
  • Small Sizes - P-GTFW-S-X
  • Medium Sizes - P-GTFW-M-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-J-1 2.6 mm (0.102") 1.0 mm (0.039"
Starting at $4.95
Partially Out of Stock
Pickguard - Fender®, for American Telecaster, 8-hole
Colors Available:
Fits most American Telecasters. This modern pickguard fits American, American Standard, American Deluxe, American Special, Highway One™, Road Worn®, Deluxe Player, Blacktop, Standard and Deluxe series Telecaster guitars (also fits Squier® Standard series Telecaster models 2004-present).
Starting at $19.85
Pickguard - Fender®, for American Stratocaster, 11-hole
Colors Available:
Fits most American and Mexican stratocasters. 3 ply standard 11 hole pickguard. Fits 3 single coil pickukps.
Starting at $23.35
Screw - M3, Painted, Combination Head, Binding, 6mm
Colors Available:
Combination Drive, Colored Head Binding Screws, 6mm, M3, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$1.75
package of 5
XLR Plug - Amphenol, female, thermoplastic, black
XLR 3 Pole female audio cable connector. Musician range. Black finish, silver contact plating. "Jaws" cable retention system.
$2.48
Save 15%
Originally: $2.92
Storage Box - for electronic components
This electronic component storage box works great for storing caps, pots, resistors and other electronic components. Made of plastic.
Starting at $6.25
Fret Wire - 18% Nickel-Silver, 2 ft lengths, Small sizes
High quality 18% Nickel-Silver fret wire in small sizes.
  • 2mm - 2.1mm Crown Widths, (0.079" - 0.083")
  • 0.9mm - 1.3mm Crown Heights, (0.035" - 0.051")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-S-1 38 PRICE P-GTFW-S-2 31 PRICE P-GTFW-S-3 32 PRICE P-GTFW-S-4 26 PRICE P-GTFW-S-5 35 PRICE For additional sizes and options please see:
  • Medium Sizes - P-GTFW-M-X
  • Jumbo Sizes - P-GTFW-J-X
  • Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-S-1 2.0 mm (0.079") 0.9 mm (0.035") 2.5 mm (0.098") 0.5 mm (0.020") 0.83 mm (0.033")
Starting at $4.50
¼" Plug - Amphenol, Jaws Clamp, Thermoplastic
Colors Available:
1/4" phone plug, jaws cable clamp, thermoplastic backshell. Features:
  • Stylised Shell design with ergonomic grip
  • Robust diecast keyed shell
  • Great solderability with increased solder area
  • Precision machined contacts
  • "Jaws" cable retention system
  • Quick and easy assembly
  • Nickel-plated contacts
Starting at $4.71
Save 10%
Originally: $5.23
Socket - 9 Pin, for Auto-Wave Soldering, Made in China
9-pin Micalex ceramic tube socket for auto-wave soldering applications.
Measurements:
  • Center PCB hole diameter -0.73"
  • Mounting pin diameters - (9 holes at 1.00") and (3 holes at 1.26")
$2.07
Save 15%
Originally: $2.44
Wire Nut - 18-22AWG, 300V, Rated for 105°C
300V wire nuts for use with 18 gauge through 22 gauge wires. These wire nuts are great for use on appliances, televisions, stereos, antennas, or for any small wiring application. Rated for up to 105°C.
$1.23
Save 15%
Originally: $1.45
package of 20
¼" Plug - Amphenol, Mono, Straight, SwitchPlug™, Large
The Amphenol T series SwitchPlug™ uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals.
$9.13
Pickguard - Fender®, Vintage '50s Strat, 8-Hole
Colors Available:
Original Fender® pickguard. This vintage-style pickguard fits many 1950s-style American Vintage, Hot Rod, Road Worn®, Classic Player and Classic series Stratocaster guitars with three single-coil pickups.
Starting at $19.85
Vacuum Tube - 6BN6 / 6KS6, Discriminator, Gated Beam
Heater-cathode type beam tube of miniature construction designed primarily to form the combined operations of the limiter, discriminator, and audio-voltage amplifier in FM and intercarrier television receivers.
$2.45
Save 50%
Originally: $4.90
Speaker - Jensen® Jets, 12", The Raptor, 100W
The Raptor is one of the newest Jensen speakers, released after a long time in development refining the ideal qualities of a contemporary, sophisticated, touch responsive speaker. The result is a 100W ceramic speaker with a characteristic, vocal, rounded midrange and a silky-smooth top end, all based on a solid, fat and firm bass foundation. Eminently versatile, the Raptor is equally suitable to clean, crunch and lead tones. Guitarist Description: Powerful, smooth and warm. Excellent definition in the upper midrange. When presented with overdrive distortion, it exhibits a silky, full-sounding lead tone.
  • Lows: Fat/Deep
  • Mids: Firm/Vocal
  • Highs: Subtle/Extended
  • Overdrive: Smooth/Crunchy
Starting at $117.60
Save 15%
Originally: $138.35