Pedal Parts / DIY

Dunlop

Dunlop is a manufacturer of picks, pedals, and accessories for over 50 years.
Rubber Tread - Dunlop, Fuzz Face
Genuine rubber tread for Fuzz Face pedals from Dunlop. The tread is for full size Fuzz Face enclosures and has a cutout for the footswitch and text logo. The tread comes with a 3M adhesive backing.
$10.95
Slide Pad - MXR, Small
Genuine MXR slide pad for use with small MXR pedals (1590B enclosures). The small slide pad attaches to the bottom cover plate of the enclosure using the adhesive backing.
$2.65
Screws - Dunlop, MXR, housing screws, package of 4
Package of 4
Genuine Dunlop replacement housing screws for MXR/ Dunlop pedals. Replace lost screws and keep your battery access plate on tight. 6-32 thread, Phillips head.
$1.55
Potentiometer - Dunlop Hot Potz, 470 kΩ
Used in Jimi Hendrix's WAH and Dunlop volume pedal. 470 kΩ. Original Dunlop replacement part.
$23.50
Potentiometer - Dunlop, Wah, 10 kΩ linear
Genuine Dunlop replacement potentiometer for wah/volume.
  • 10 kΩ Linear
  • Gear included
$14.50
PC Board - Dunlop, replacement for Crybaby
Original Crybaby replacement circuit board for pedals made after 1990. Original Dunlop replacement part.
$23.50
Switch - Dunlop, PCB mount, boost / distortion kick switch
ECB233 boost / distortion kick switch. Original Dunlop replacement part. Used in the SW95 Crybaby Slash Wah. Through hole PCB mount.
$4.65
Switch - Dunlop, Footswitch, DPDT, Solder Lugs, for MXR
Dunlop® Electronic Components DPDT latching footswitch with solder lugs for MXR, Cry Baby, and other effects pedals.
$15.25
Power Supply - Dunlop, 9V, 200mA, 3.5mm Positive Tip
This AC adapter powers several older models of Dunlop pedals, which required a 3.5 mm, or 1/8”, plug as opposed to the 5.5mm x 2.1mm barrel plug required by current models.
  • Voltage: 9VDC
  • Current: 200mA
  • Tip positive; Sleeve negative
$12.65
Knob - Dunlop, Cosmod, Small Plastic MXR, Push-On
Genuine Dunlop / MXR knob for use with T18 knurled pot shafts. This is a smaller version of the classic MXR knob P-ECB-130. This knob is great for use on projects where a stylish knob is needed and space is limited.
$2.35
Inductor - Dunlop, Fasel Toroidal Model, Red
This precision-wound toroidal will give the cleanest sound possible. Use the cup core model, part number P-ECB-FI-01 for a more vintage sound. The Fasel inductor is back! These near-mythical inductors are the key to the singing tonal sweep every wah player lusts for but can't capture with a new pedal. The ultimate upgrade to your current wah, these magic bullets are available exclusively from Dunlop, the new worldwide agent for Fasel of Italy. Your wah will finally give up the lush harmonic sparkle you've always heard in your head but could never coax from you rig.
$16.25
Switch - Dunlop, Footswitch, GCB-95
GCB-95 latching switch. This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.
$9.95
Tread - Dunlop, rubber, replacement for Wahs
Genuine Dunlop replacement tread pad for Cry-Baby wah pedals. Adhesive backed for easy installation and labeled on top surface to indicate amplifier and instrument inputs.
$3.55
Gear - Dunlop, replacement for Wah D-shaft pots
Original Dunlop replacement gear for wah potentiometers (C-ring included). The gear has 14 teeth and a flatted inner diameter to fit securely onto a potentiometer with flatted shaft. The included C-ring is placed over the top end of the gear to keep it from sliding off the end of the potentiometer shaft.
$1.95
Knob - Dunlop, Jimi Hendrix Fuzz Face JH-F1
Genuine Dunlop replacement knob for Jimi Hendrix JH-F1 Fuzz Face. Knob is designed for use with solid/plastic 1/4” shafts and features set screw attachment. Two washers are included.
$2.35
Knob - Dunlop, MXR Knob for pedals, skirted
Large MXR knob with set screw for MXR pedals. Original Dunlop replacement part. Skirted knob with white line and dot indicator.
$3.65
Potentiometer - Dunlop, 250 kΩ Audio, for Dunlop GCB80
250 kΩ gear shaft pot with an audio taper. Original Dunlop replacement part. Used in the Dunlop GCB80 High Gain Volume Pedal.
$19.95
Rubber feet - Dunlop, for Crybaby, includes screws
Package of 4
Rubber feet with screws for Dunlop Crybaby Wah pedal. Package of four. Original Dunlop replacement part. Rubber foot diameter: 5/8" Rubber foot height: 5/16" Screw threading: #6-32 (screw extends 5/16" beyond the rubber surface)
$2.65
Switch - Dunlop, MXR, DPDT, PC mount
This is a small double pole double throw (DPDT) effect / bypass latching switch for MXR pedals. Genuine Dunlop replacement part. Six pin through hole PCB mount.
$6.15
Battery Box - Dunlop, snap-in enclosure
Original Dunlop snap-in, black battery box with snap-closed swing door for effects pedals using one 9 volt battery (accessed via the bottom of the pedal). Cutout dimensions: 2.46" x 1.27", box depth: 0.70", snaps over a panel thickness of about 0.04". Used on Dunlop Cry Baby Wah Wah GCB95 and many Dunlop effects pedals.
$1.95
Knob - Dunlop, MXR, small knurled, aluminum
Genuine Dunlop replacement small knurled knob for MXR pedals. Push -on style knob designed for use with coarse knurled shafts.
$2.35
Potentiometer - Dunlop, Hot Potz II Crybaby, 100 kΩ
Hot Potz II Crybaby Pot. for newer Crybaby models. Made by Beckman. 100 kΩ. Original Dunlop replacement part. The same tone and sweep characteristics as the original Cry Baby Hot Potz potentiometer with low wiper noise and extended life.
$20.95
Power Supply - Dunlop, 18V A/C Adapter
The Dunlop 18V power supply for Dunlop effects will save you some money on batteries and get the right power to your pedal! Features Include:
  • 18 volts of regulated DC current
  • 2.1 mm x 5.5 mm plug with negative center

Compatible Dunlop pedals include:
  • Older Crybaby Multi-Wah
  • SW-95 Slash Wah
  • M108 10-band EQ
  • KFK1 10-band EQ
  • M117R Flanger
  • EVH 117 Flanger
  • DD11 Dime Distortion
  • M134 Chorus
  • M181 Bass Blowtorch

Plus many other pedals requiring an 18vdc power supply!
$16.25
¼" Jack - Dunlop, Stereo, for effects pedals
Stereo jack for Dunlop effects pedals. Original Dunlop replacement part. Though hole PCB mount with six pins.
$3.35