Pedal Parts / DIY

Panel mount LED lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:

• 0.171” mounting hole
• For panel thicknesses of 0.031” to 0.125″
• Fresnel lens
• Low Profile
• Fits standard 3mm LEDs

For a version that fits 5mm LEDs, see P-L710-X.

Panel mount LED lenses made of high quality polycarbonate. These square lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:

• 0.171” mounting hole
• For panel thicknesses of 0.031” to 0.125″
• Fresnel lens
• Low Profile
• Fits standard 3mm LEDs

Panel mount LED lenses made of high quality polycarbonate. These flat cylindrical lenses provide a unique retro appearance with a small panel footprint and work well in any project using LED indicators. Features:

• ¼” mounting hole
• For panel thicknesses of 1/16” to ⅛”
• Fresnel lens
• Flat cylindrical shape
• Fits standard 5mm LEDs

Panel mount LED lenses made of high quality polycarbonate. These flat cylindrical lenses provide a unique retro appearance with a small panel footprint and work well in any project using LED indicators. Features:

• 0.171” mounting hole
• For panel thicknesses of 0.031” to 0.094″
• Fresnel lens
• Flat cylindrical shape
• Fits standard 3mm LEDs

New-old-stock Soviet pilot lights that fit screw base bulbs. These lights have a unique bakelite frame and bakelite bezel. The lights come with a 6.3V bulb but can be used with any G-3-½ screw base bulb. The diameter of the light is 0.785” and the diameter of the mounting hole is 0.625”. Includes a bakelite mounting nut. Note: A small 0.2” notch must either be filed into the 0.625” mounting hole or filed off of the light to flush mount with a panel.

New-old-stock Soviet pilot lights that operate on 9V. These lights have a unique bakelite frame and metal bezel. The lights come with a 9V bulb but can be used with any voltage bulb that fits this type of socket. The diameter of the light is 12mm and the diameter of the mounting hole is 8.1mm. Includes a wavy washer and knurled nut. Note: There can be small differences in the appearance and tint of the lens and color of the bakelite. A small 0.1” notch must either be filed into the 0.625” mounting hole or filed off of the fuse to flush mount with a panel. The small bulbs can come loose during shipping and reseating the bulb is recommended before use.

Prewired low-profile LED bezel with a diffused LED. With a 0.07” height, this black metal LED bezel has an almost flush appearance on the panel it’s mounted to. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12VDC. Mounting nut and rubber o-ring included.

Prewired cone-shaped LED bezel. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12VDC. Mounting nut and lock washer included.

AML387 incandescent light bulb, T-1 3/4 midget flanged, miniature lamp. Great replacement for Morley.

Lens Diameter: 3 mm Overall Height: 5.4 mm Lens Type: Diffused Multiple color options available.

High brightness 3mm LED. Great for use in pedal builds and other applications where a bold, bright, indicator is needed. Multiple colors available.

• 3mm size
• Water clear
• High brightness
• Multiple colors available
• Package of 5

3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.

5mm (T-1 ¾) diffused LED’s. Great for use in pedal builds and other applications where a tinted and diffused indicator is needed. Multiple colors available.

• 5mm size
• Tinted and diffused
• Multiple colors available
• Package of 5

Prewired steel low-profile LED bezel with a diffused LED. With a 0.061” height, this steel LED bezel has an almost flush appearance on the panel it’s mounted to. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12VDC. Mounting nut and rubber o-ring included.

Prewired cup-shaped LED bezel with a red LED. An internal current limiting resistor is installed in this bezel and it can be used with voltages up to 12V. Mounting nut and lock washer included.

Holder for mounting LEDs to panels.

Bezel Assembly with 3mm Red LED. Required hole size: 0.25". Washer and hex nut included. LED Specifications: Color Red Lens Diam 3 mm Overall Height 5.4 mm Lens Type Diffused Luminous Intensity Min. 3.6 mCd @If (test) 10 mA Wavelngth (Peak) 568 nm V(FM) Max.(V) Forward Voltage 2.7 V @I(F) (test) 10 mA Min Operating Temp -30° Max Operating Temp 80°

High brightness 5mm LED. Great for use in pedal and amp builds as well as other applications where a bold, bright, indicator is needed. Multiple colors available.

• 5mm size
• Water clear
• High brightness
• Multiple colors available
• Package of 5

Leaded LED rings for use with standard footswitches. These LED rings use an array of LEDs with internal current limiting so no additional parts are required for use with 9VDC. Red, green, blue, and two-color combinations are available. A 15mm panel hole is required. See full dimensions below to check footswitch compatibility.

Panel mount led lenses made of high quality polycarbonate. These lenses provide a clean semi-flush appearance with a small panel footprint and work well in any project using LED indicators. Features:

• ¼” mounting hole
• For panel thicknesses of 1/16” to ⅛”
• Fresnel lens
• Low Profile

For a version that fits 3mm LEDs, see P-L310-X.