Pedal Parts / DIY

Pedal Tape - Godlyke, Power Grip, 1 Meter Roll
For the best Pedalboard Dual Lock and Velcro Alternative, try Power-All Power-Grip. Simple, yet ingenious, Power-Grip pedal board tape mates to itself via rows of tiny mushroom-shaped posts that form a much stronger bond than traditional "hook & loop" Velcro fasteners. Just cut to size, apply, and GRIP! Approximately enough for 6 standard-sized pedals
$14.95
Nut - Hex finished, fine thread, zinc
Package of 5
Zinc nut. Designed to be used with any low carbon bolt or screw such as a grade 2 bolt. Most commonly used nut. Achieves strength through cold forming. Low carbon steel.
$0.30
Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Starting at $0.35
Washer - Type A Narrow, Flat, steel
Package of 5
Steel, type A narrow. SAE washers have a tighter fit on the bolt and a smaller outside diameter. Designed for general purpose mechanical and structural use.
Starting at $0.45
Standoffs - #6-32, Female, Aluminum
Package of 4
#6-32 threading, package of 4. Comes in 1/2" or 3/4". For male to female standoffs, see S-H170X
$2.20
Standoffs - 0.18", plastic with adhesive backing
Low-profile adhesive standoffs with a 0.180" standoff height that securely attaches your PCB to a flat surface. The post inserts into a 0.125” mounting hole and includes a locking tab that secures the PCB when inserted. It can be used with 1/16” or 1/32” thick PCBs. The 0.6 x 0.6” square base is offset to allow the base to be underneath the board when the mounting hole is close to the PCB edge and the offset base provides a large sticking surface while permitting the PCB to be mounted in tight spaces or close to walls. This can be useful when working with small enclosures. High-quality 3M™ brand double-sided tape secures the standoff to a flat surface. These standoffs are available in packs of 8, 24, or 100 pieces Features:
  • Low profile 0.180" standoff height.
  • Offset base allows use when holes are close to the PCB edge.
Starting at $2.25
Standoff - M3, Male-Female, Aluminum, 5.5mm Diameter
  • Finish/Plating: Clear Iridite
  • Material: Aluminum
  • OD: 5.5mm
  • Shape: Hex (Metric)
  • Style: M-F Standoff
  • Thread Depth(D): 8mm
  • Thread Length (TL): 8mm
  • Thread: M3
  • Type: Threaded Standoffs
Starting at $0.60
Solder Lug - #6 or #8 Hole, Locking
Package of 10
Locking terminal lugs, #6 or #8 hole, 5/8" length, angled. Package of 10
Starting at $1.50
Washer - Internal Tooth Lock, spring steel
Package of 5
Spring steel tooth-lock washer. Uses internal teeth for locking and tension.
Starting at $0.45
Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5
Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
$0.40
Standoff - #6-32, Male-Female, Aluminum
Package of 4
#6-32 threading, package of 4. Comes in 1/2" or 3/4" length. For female standoffs, see S-H172X
Starting at $2.25
Screws - Dunlop, MXR, housing screws, package of 4
Package of 4
Genuine Dunlop replacement housing screws for MXR/ Dunlop pedals. Replace lost screws and keep your battery access plate on tight. 6-32 thread, Phillips head.
$1.55