Pedal Parts / DIY
Metal Stamp Set - A-Z Alphabet, 0.125” Letter Height
Metal stamp set with 27 stamps for the letters A through Z and an ampersand. The height of the stamped letter is 0.125”. These stamps mark single characters by indenting the mark into the surface of a material. The process is simple, requiring only a hammer to strike the stamp onto the material. This stamp set is a great tool for adding control labels to projects such as pedal enclosures.
Metal Stamp Set - 0-9 Digits, 0.125” Numeral Height
Metal stamp set with nine stamps for the numbers 0 through 9. The 6 stamp is also used for 9. The height of a stamped numeral is 0.125”. These stamps mark single characters by indenting the mark into the surface of a material. The process is simple, requiring only a hammer to strike the stamp onto the material. This stamp set is a great tool for adding control labels to projects such as pedal enclosures.
Tool Set - Rocket Sockets, Pepers’ Pedals, Complete Set
Rocket Sockets by Pepers' Pedals allow for the tightening of various nuts for jacks, potentiometers and switches on guitar effects pedals without scratching the enclosure and damaging the graphics or paint as the typical metal tools will do.
Tool - Better Setter, Pepers’ Pedals, Knob Alignment
The Better Setter tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. The U-shaped slot is fitted around the pot shaft and the adjustable straight edge is then aligned and set to the edge of the enclosure. The two white lines on the U-shaped slot can then be used to set the knob to the beginning or end of the pot’s travel. Works best with 7mm bushing potentiometers.
Staking Tool Set - Anvil and Punch, for Eyelets and Turrets
Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.
Cutters - Xcelite, Relieved Tapered Head
- Relieved tapered head-flush cutter
- Allows use between closely spaced components
- Features blue cushion grips
Wire Stripper / Cutter - 8", 10-24 AWG
Heavy duty wire strippers with additional cutting and crimping features. Capable of stripping 12 through 24AWG stranded wires and 10 through 22AWG solid wires, these strippers can handle most wires used in electronics.
Screwdriver Set - Xcelite, Precision, XP600, 6 pieces
Electrostatic Discharge Safe. Designed to maximize efficiency and production. Fast turning swivel cap with cavity provides precise centering. Constructed of superior strength materials. Product Features:
- ESD safe to provide protection to ESD sensitive items
- Chrome-molybdenum vanadium steel blades provide superior strength
- Fast turning swivel caps provides optimum control for precise centering
- Black oxide tips for longer wear life
- No-roll handle design keeps drivers from rolling off uneven surfaces
- Storage case provides a home and keeps drivers safe
package of 6
Center Punch - Spring Loaded, Adjustable Force
Spring loaded center punch with an adjustable force for aligning pilot holes when drilling into materials. The large handle makes the push-to-strike action simple and accurate. Rotating the red handle adjusts the force amount.
Tool - Helping Hand with Magnifier, 65mm, 2.5X
Magnifier with 2 ½" lens. Both clamps and magnifier can be removed. Great for precision work on circuit boards, solders and repairs. 6 ball joints for any angle. Simple to adjust thumb screws. Nickel plating fittings. Sturdy iron cast base. Alligator spring clips
Storage Box - for electronic components
This electronic component storage box works great for storing caps, pots, resistors and other electronic components. Made of plastic.
Starting at $6.25
Soldering Iron Stand - Atten, TJ-228, Deluxe
Atten TJ-228 soldering iron stand with adjustable mounting angle, sponge holder and solder spool stand. This stand is a great option for stand-alone soldering irons or as a replacement for a worn out stand.
Caliper - Digital, highly-accurate for luthiers
This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.
- Measures fret height before AND after fret installation
- Accurate readouts in inches or millimeters
- A must for all precision guitar work
Heat Sink - dissipate heat during soldering
Temporary Heat Sink. Absorb & dissipate heat during soldering/desoldering sensitive parts. Made in Taiwan.
Bench-top Smoke Absorber - Atten, ST-1016, For Soldering
Atten ST-1016 benchtop fume extractor with LED light. This smoke absorber can be operated vertically or horizontally for more focused extraction based on positioning. The filter is made of highly activated carbon for better absorption. The fan provides a steady pull ensuring that all fumes pass through the filter when used properly. The optional light can provide additional lighting on the soldering surface. Carbon filter included. Specifications:
- Air volume (vertical): 1.03 m³/min
- Air volume (horizontal): 0.4 m³/min0.4
- Air flow (vertical): 1.0 m/s
- Air flow (horizontal): 2.6 m/s
Magnetic Parts Tray - Dunlop, System 65
Keep all of your parts in one place with this magnetic tray. 4” diameter across the top rim and 2.5” diameter on the base.
Staking Tool - for Eyelets and Turrets
Turret staking tool for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For anvil see S-T1717
For smaller staking tool, see S-T1714
For anvil see S-T1717
For smaller staking tool, see S-T1714
- Drill 1/8" hole
- Insert eyelet
- Flip board over on to a hard service
- Center staking tool over the eyelet
- Strike staking tool with hammer to clamp eyelet to board
Tape - Electrical, Black, 3⁄4" x 20 yds
Electrical tape for splicing and insulating wires up to 600V. Rubber adhesive with soft polyvinyl chloride film backing. UL Listed.
Tool - Precision Devices, Lead Former, Various Sizes
High quality, made in USA lead formers. These are great tools for bending component leads to fit various footprints. The radiused ends provide a right angle bend that does not stress the metal lead. These lead formers are made of high impact ABS plastic.
Pliers - Xcelite, serrated jaw, 5.5", Long Reach
5 1/2" Overall Length, 1 1/2" Jaw Length Product Features:
- Thin profile, long reach pliers
- For access into tight spaces
- Lightweight for maximum comfort
- For use in precision electronic assembly applications
- Features serrated jaws
- Features red grips
Container - Jar, Clear Round Mouth, White Cap, 2 oz
2 oz clear jar with a white cap. Instant identification for your parts, liquids or dry goods. Super wide mouth for easy filling.
- Durable polystyrene jars.
- FDA compliant.
- Caps included.
Tool - IC Extractor / Puller
Hand-held IC extractor for use on a variety of chip sizes. The metal ends hook beneath the chip. When a pinching force is applied to the bends of the plastic, the metal ends clamp onto the chip and pull upward uniformly to avoid bending pins. This tool can be used on widths of 7mm and up.
Desoldering Pump - Weller, manual, for removing solder
Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning. This lightweight desoldering pump has an anodized aluminium body to assure durability and features a plunger safety shield, short-stroke plunger and a no-clog automatic tip cleaner. Replace tip with S-T7875B. Made in Taiwan.
Tool - Solder Spool Stand
All-metal solder spool stand with a large metal roller for a smooth reel out. This stand features a handle as well as an eyelet that holds the solder line in a static position for ease of use. Extremely useful for making your soldering jobs quick and easy!