You are here

Pedal Parts / DIY

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(3 pages)
P-H1032LChassis Box - 1092L, Diecast, Looper, 10" x 2.75" x 2.05"

Extra long diecast aluminum chassis commonly used for looper/loop-switching pedals. This enclosure style is often referred to as the 1032L. Mounting screws for the bottom plate are included with this chassis box.


$9.95
Click to read more
P-H1590BXChassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

Starting at $7.07
Click to read more
P-H1590DDCEChassis Box - 1590DD, Diecast, 7.38" x 4.70" x 1.30"

Diecast Aluminum Chassis Box, 7.4” x 4.7” x 1.3”. Six included machine screws secure lid.


$13.50
Click to read more
P-H1590ACE-XChassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Colors Available:
New!:

Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.


Starting at $4.95
Click to read more
P-H1590STPCChassis Box - Hammond, 1590STPC, Diecast, Octagon, 5.23" x 1.4"

Box, Hammond, Unpainted Aluminum Enclosure, Octagon, 5.23" x 5.23" x 1.38"


$11.63
Click to read more
P-H1590GChassis Box - Hammond, 1590G, Diecast, 3.94" x 1.97" x 0.83"

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.


$8.77
Click to read more
P-H1590AChassis Box - Hammond, 1590A, Diecast, 3.64" x 1.52" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$6.22
Click to read more
P-H1590BBXChassis Box - Hammond, 1590BB, Diecast, 4.67" x 3.68" x 1.18"
Colors Available:
New!:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

Starting at $9.42
Click to read more
P-H1590BBCE-XChassis Box - 1590BB, Diecast, 4.67" x 3.68" x 1.18"
Colors Available:

Chassis box perfectly suited for effects pedals and other DIY projects.


Starting at $8.95
Click to read more
P-H1590BBCE-PDChassis Box - 1590BB, Diecast, 4.67 x 3.68 x 1.18", predrilled

Same as Hammond P-H1590BB, but generic manufacture made in Taiwan. Measures 4.67" x 3.68" x 1.18" deep. Holes are drilled for pots, footswitch and jacks. Holes are 1 @ ½" dia., 2 @ 3/8" dia, and 2 @ 8 mm dia.


$9.95
Click to read more

Pages

(3 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Pedal Parts / DIY