You are here

Pedal Parts / DIY

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(3 pages)
P-H1590ACE-XChassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Colors Available:
New!:

Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.


$4.95
Starting at $4.45
You save: 10%
Click to read more
P-H1590BCEXChassis Box - 1590B, Diecast, 4.39" x 2.34" x 1.06"
Colors Available:
New!:

4.39" x 2.34" x 1.06" D. Equivalent to Hammond P-H1590B.


$5.95
Starting at $5.36
You save: 10%
Click to read more
P-H1590LBXChassis Box - Hammond, 1590LB, Diecast, 1.99" x 1.99" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$6.14
Starting at $5.53
You save: 10%
Click to read more
P-H1590AChassis Box - Hammond, 1590A, Diecast, 3.64" x 1.52" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$6.22
$5.60
You save: 10%
Click to read more
P-H1590N1CE-XChassis Box - 1590N1 / 125B, Diecast, 4.77" x 2.60" x 1.39"
Colors Available:
New!:

Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.



Measures 4.77" x 2.60" x 1.39".


$6.59
Starting at $5.93
You save: 10%
Click to read more
P-H1590BXChassis Box - Hammond, 1590B, Diecast, 4.40" x 2.38" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$7.07
Starting at $6.36
You save: 10%
Click to read more
P-H1590B2Chassis Box - Hammond, 1590B2, Diecast, 4.4" x 2.3" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$7.73
$6.96
You save: 10%
Click to read more
P-H1590G2Chassis Box - 1590G2, Diecast, 3.9" x 2.0" x 1.2"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$7.95
$7.16
You save: 10%
Click to read more
P-H1590GChassis Box - Hammond, 1590G, Diecast, 3.94" x 1.97" x 0.83"

Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure. Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. Vibra finished for a smooth surface with no sharp edges. Four 6-32 x ½" machine screws secure lid - into tapped holes. Designed to meet IP54. Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.


$8.77
$7.89
You save: 10%
Click to read more
P-H1590B3Chassis Box - Hammond, 1590B3, Diecast, 4.6" x 3.0" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$8.90
$8.01
You save: 10%
Click to read more

Pages

(3 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Pedal Parts / DIY