You are here

Pedal Parts / DIY

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(3 pages)
P-H1032LChassis Box - 1092L, Diecast, Looper, 10" x 2.75" x 2.05"

Extra long diecast aluminum chassis commonly used for looper/loop-switching pedals. This enclosure style is often referred to as the 1032L. Mounting screws for the bottom plate are included with this chassis box.


$9.95
$8.96
You save: 10%
Click to read more
P-H1590AChassis Box - Hammond, 1590A, Diecast, 3.64" x 1.52" x 1.06"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$6.22
$5.60
You save: 10%
Click to read more
P-H1590ACE-XChassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Colors Available:
New!:

Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.


$4.95
Starting at $4.45
You save: 10%
Click to read more
P-H1590B2Chassis Box - Hammond, 1590B2, Diecast, 4.4" x 2.3" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$7.73
$6.96
You save: 10%
Click to read more
P-H1590B3Chassis Box - Hammond, 1590B3, Diecast, 4.6" x 3.0" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$8.90
$8.01
You save: 10%
Click to read more
P-H1590BB-GORVA-XChassis Box - GØRVA Design, S90, Diecast, 4.61" x 3.54" x 1.54"
Colors Available:

The Gorva S90 is a high quality powder-coated take on the Hammond 1590BBM size enclosure with a focus on function and design. Features:



  • Beveled top and rounded corners for high quality look.
  • Tight fit and small gap between the enclosure and lid.
  • Undercut boss allows more internal room for more flexible layout.
  • Smooth, eggshell-like matte powder coating.

$14.95
$13.46
You save: 10%
Click to read more
P-H1590BB2Chassis Box - Hammond, 1590BB2, Diecast, 4.7" x 3.7" x 1.5"
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
  • Dimensions shown are exterior dimensions.
  • Add 0.16" to enclosure depth for lid.

$10.12
$9.11
You save: 10%
Click to read more
P-H1590BBCE-PDChassis Box - 1590BB, Diecast, 4.67 x 3.68 x 1.18", predrilled

Same as Hammond P-H1590BB, but generic manufacture made in Taiwan. Measures 4.67" x 3.68" x 1.18" deep. Holes are drilled for pots, footswitch and jacks. Holes are 1 @ ½" dia., 2 @ 3/8" dia, and 2 @ 8 mm dia.


$9.95
$8.96
You save: 10%
Click to read more
P-H1590BBCE-XChassis Box - 1590BB, Diecast, 4.67" x 3.68" x 1.18"
Colors Available:

Chassis box perfectly suited for effects pedals and other DIY projects.


$8.95
Starting at $8.05
You save: 10%
Click to read more
P-H1590BBXChassis Box - Hammond, 1590BB, Diecast, 4.67" x 3.68" x 1.18"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.

$9.42
Starting at $8.48
You save: 10%
Click to read more

Pages

(3 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Pedal Parts / DIY