Pedal Parts / DIY

¼" Jack - Cliff, Mono, Switched, Gold
Mono input jack. 4 solder terminals, switched. Used in modern Marshall amps.
$2.79
BreadBoard - Solderless, 400 point pattern
Solderless (plug-in) breadboard with 400 connection tie-points (i.e. 400 wire insertion holes) and 4 power rails. Solderless breadboards are great for building and testing new circuits because parts can be easily inserted and removed making them completely re-usable. This breadboard has a 300 tie-point IC-circuit area plus four 25 tie-point power rails. The housing is made of white ABS plastic, with a printed legend giving numbers and letters for columns and rows. The internal contacts are phosphor bronze with a plated nickel finish and a peelable adhesive tape backing is provided for attaching it to a surface. Be sure to check out the Zipwire™ jumper wire kits for use with this breadboard.
$4.75
Jack Seal - Cliff, for S-H910 and S-H911
Replacement seal for S-H910 and S-H911 Cliff UK jacks.
$0.69
Audio Power Amplifier - LM386N-1, Low Voltage
LM386 Low Voltage Audio Power Amplifier The LM386 is a mono low voltage amplifier that can be used in a variety of applications. It can drive loads from 4 Ω to 32 Ω. The gain is internally set to 20 but it can be modified from 20 to 200 by placing a resistor and capacitor between pins 1 and 8. As this is an Op Amp it can be used in different configurations to fit in several applications. The internal gain setting resistor allows the LM386 to be used in a very low part count system. In addition a series resistor can be placed between pins 1 and 5 to modify the gain and frequency response for specific applications. These are found in many small audio amplifiers and even tiny pedal sized guitar amplifiers! There are tons of possibilities for this little Op Amp.
$1.70
Terminal Strip - 7 Lug, 1st & 7th Lug Common, Horizontal
Package of 5
Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets. 7 lugs, first and seventh lug common.
$5.00
Switch - Carling, Mini Toggle, SPDT, 3-Position, PC Pins
Carling mini-toggle switch, single pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position, On-Off-On.
$3.89
Bulb - Morley, Effects Pedals Replacement
AML387 incandescent light bulb, T-1 3/4 midget flanged, miniature lamp. Great replacement for Morley.
$0.95
Knob - Orange brand, top hat, set screw
Original Orange™ amp knob with hex set screw. Fits 6 mm diameter shaft. Black top-hat style knob with with white dot indicator.
Starting at $7.15
Capacitor - 25V, Radial Lead, Electrolytic
Package of 5
High quality, radial leaded, aluminum electrolytic capacitors rated at 25VDC.
Starting at $0.49
Chassis Box - Hammond, 1590LB, Diecast, 1.99" x 1.99" x 1.06"
Colors Available:
  • Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
  • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
  • Vibra finished for a smooth surface with no sharp edges.
  • Four 6-32 x ½" machine screws secure lid - into tapped holes.
  • Designed to meet IP54.
  • Low side wall draft angle (2 degrees or less) for easy P.C.
Starting at $6.14
Relay - Panasonic, DPDT, 5V, Single Coil, Non-Latching
High quality non-latching relays from the Panasonic TQ series. These 5 volt relays are commonly used in pedals for true bypass switching. Relay switching can allow for a variety of options on pedal builds. Different footswitch modes can be obtained using the same momentary footswitch. Stereo switching using a standard footswitch is another possible option. Features:
  • Compact low profile size
  • Standard DIL spacing for easy PCB use and breadboard compatibility
  • Non-Latching
  • Single Coil
  • 5V Coil Voltage

For a latching version, please see P-RP-TQ2-L-5V.
$3.25
¼" Jack - Mono, for Peavey, Insulated
2 tip HID (High Definition), insulated, plastic bushing. Please note that this does not include nuts or washers. Please see parts S-HRVNT, S-HRVLW, and R-VNUT-38 if you require them.
$2.15
Transistor - 2N3904, TO-92 case, NPN
General purpose low-power NPN bipolar junction transistor, used frequently in hobbyist electronic projects.
$0.18
Switch - Carling, Mini Toggle, SPDT, 2 Position, Solder Lugs
Carling, SPDT mini toggle, 2 positions, ¼" mounting hole diameter, 0.354" bushing length.
$2.50
¼" Jack - Switchcraft, Mono, open circuit
Switchcraft Type 11 Little-Jax phone jack. Mono 2-conductor, open circuit. Mates with standard ¼" plugs and is available with standard or long bushings. Great replacement for Fender® guitar & amp input jacks.
Starting at $1.95
Reverb Module - Accutronics Belton, Digi-Log, Adjustable Decay
A great digital reverb sound that easily replaces a spring reverberation unit. Stereo outputs may be summed for mono operation. Simple interface: input, output, +5V, and ground
$15.95
¼" Jack - Rean, horizontal, switched, solder lugs
Horizontal 1/4" jack, all contacts switched, plastic housing with nut and washer, solder tap version
$0.95
¼" Jack - Dunlop, Stereo, for effects pedals
Stereo jack for Dunlop effects pedals. Original Dunlop replacement part. Though hole PCB mount with six pins.
$3.35
Wire - 22 AWG Solid Core, PVC, 600V, Variety Pack
Variety pack, 10 feet for each color. 6 colors, 60 feet total. Great for color-coded wiring with smaller quantities.
600V stranded. Strands are tinned individually. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
Included colors:
  • Black
  • Red
  • Green
  • White
  • Yellow
  • Blue

See S-W33 for 50 foot rolls of individual colors.
$11.50
Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
$0.70
¼" Jack - Cliff, White, Solder Lug
Cliff UK 1/4" white jack. External threading: 7/16-20. Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability. Tough, molded Nylon body.
$2.85
StripBoard - Single Sided, 3.15” x 1.97”, Mounting Holes
Prototyping circuit board with a standard long strip pattern where tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads and the board has 0.1" hole spacing for DIP integrated circuits/ headers as well as other parts. Higher quality than traditional stripboard, the holes are drilled, not punched.
$2.95
¼" Jack - Cliff, Sealed, Switched
Original Cliff sealed and switched blue jack. Fully threaded. Many types of professional music equipment nowadays use high power components, and need to be cooled by fans. Fans draw in dust and pollutants which can adversely affect the contacts of conventional jacks, with exposed contacts. This sealed jack avoids possibility of contamination of contacts by means of a sealing cover over the top and bottom of the jack.
Starting at $2.95
DSP Module - Accutronics, 99 Effects (Reverb, Chorus, Delay, +)
The BTSE-99FX Effect board provides 99 different digital audio effects to be used in many audio applications that require sound enhancement. Equipped with a superb quality digital effects processing engine which adds that extra punch needed to make sounds truly stand out. Applications:
  • Guitar/ Keyboard/Bass amplifiers and combos
  • Audio mixing consoles / Powered mixing consoles
  • Stand -alone stereo effect units for studio and PA usage
  • Effects pedals
$32.00