Pedal Parts / DIY

Jumper Test Lead Set - Clip 35mm, Total Length 24", 22AWG
Set of 10 Jumper Test Leads " Alligator Clips 35mm each. Total Length 24", 22AWG wire. Black, Red, White, Yellow, Green
$4.99
package of 10
Diode - 1N4739A, 9.1V, Zener, 1W, 5% Tolerance
1N4739A 9.1V zener diode in a DO-41 package. A semiconductor device that, above a certain reverse voltage(the zener value) has a sudden rise in current. If forward biased, the diode is an ordinary rectifier. When reverse biased, it exhibits a sharp break in its current-voltage graph. Voltage across the diode remains essentially constant for any further increase of reverse current.
$0.27
¼" Jack - Fender®, Mono, for Amps 1999 to present
Fender R/A 1/4" mono jack. Used 1999-present. Hex nuts not included (S-H510).
$4.25
Tool - Precision Devices, Lead Former, Various Sizes
High quality, made in USA lead formers. These are great tools for bending component leads to fit various footprints. The radiused ends provide a right angle bend that does not stress the metal lead. These lead formers are made of high impact ABS plastic.
$5.59
Power Jack - Cliff, DC Panel Mount, Low Profile, 5.5mm External, 2.1mm Internal
Colors Available:
High quality PCB mounted DC jack made by Cliff. This style of PCB mounted DC jack style can be found on many manufacturers’ pedals. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Three solder pins are available for tip, ring, and switch.
Starting at $1.79
Feet - Bumpers, Tapered Rubber, 3M Adhesive, ½”, Round
Colors Available:
Tapered rubber feet with 3M self-adhesive backing. These round feet have a ½” diameter and can be used to provide grip and slight elevation (0.15") when secured to most project enclosures. Great for effects pedals and rack mount units when removed from the rack.
Starting at $0.69
package of 4
Op-Amp - TL071, Single, Low-Noise, JFET-input, 8-Pin DIP
TL071 single op amp in an 8-pin DIP package. The TL07xx JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low-input bias and offset currents, and low offset-voltage temperature coefficient. The low harmonic distortion and low noise make the TL07xseries ideally suited for high-fidelity and audio pre-amplifier applications.
$0.82
Potentiometer - Alpha, Linear, 9mm, Vertical, Knurled Shaft
Linear taper, vertical mount, Alpha pots with a 6mm T18 knurled shaft. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.
$1.90
OTA - LM13700, Dual, Linearizing Diodes and Buffers, 16-Pin DIP
The LM13700 series consists of two current controlled transconductance amplifiers, each with differential inputs and a push-pull output. The two amplifiers share common supplies but otherwise operate independently. Linearizing diodes are provided at the inputs to reduce distortion and allow higher input levels. The result is a 10-dB signal-to-noise improvement referenced to 0.5 percent THD. High impedance buffers are provided which are especially designed to complement the dynamic range of the amplifiers. The output buffers of the LM13700 differ from those of the LM13600 in that their input bias currents (and thus their output DC levels) are independent of IABC.
$3.29
Switch - Carling, Mini Toggle, DPDT, 3 Position, Solder Lugs, Flatted
Genuine Carling DPDT 3-position mini toggle switch with solder lugs. These switches feature a flattened actuator.
  • 0.354" bushing length
  • 3-Position
  • ¼" chassis hole diameter
  • DPDT ( Double Pole/ Double Throw) switch
  • Solder Lugs
Starting at $6.45
Knob - Orange brand, top hat, set screw
Original Orange™ amp knob with hex set screw. Fits 6 mm diameter shaft. Black top-hat style knob with with white dot indicator.
Starting at $7.15
Op-Amp - TL074, Quad, Low-Noise, JFET Input, 14-Pin DIP
Low noise JFET quad operational amplifier. Incorporates well matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. Features high slew rates, low input bias and offset currents, and low offset voltage temperature coefficients. Features:
  • Wide common-mode and differential voltage range
  • Low input bias and offset current
  • Low noise en = 15 nV/HZ
  • Output short-circuit protection
  • High input impedance JFET input stage
  • Low harmonic distortion: 0.01%
  • Internal frequency compensation
  • Latch up free operation
  • High slew rate: 16 V/us (typical)
$1.32
Feet - Bumpers, Tapered Rubber, 3M Adhesive, ½”, Square
Colors Available:
Tapered rubber feet with 3M self-adhesive backing. These square feet have a ½” length and width and can be used to provide grip and slight elevation (0.25") when secured to most project enclosures. Great for effects pedals and rack mount units when removed from the rack. See P-H12R-X for round feet.
$0.69
package of 4
Wire - 22 AWG Stranded Core, PVC, 600V, 50 Foot Roll
Colors Available:
600V stranded. Strands are tinned individually. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment.
Starting at $7.95
Knob - Phenolic, Set Screw, Stealth Chicken Head
High quality chicken head style knob with a unique angular design. The stealth chicken head has a thin band that extends above the base allowing for easy manipulation of the knob. This solid phenolic knob has an infilled indicator line. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
  • Height: 0.7 in.
  • Length: 1.408 in.
  • Fits ¼" shaft with set screw
$1.99
Potentiometer - GØRVA, Audio, 16mm, Solder Lug, Solid Shaft
High-quality solder lug audio taper 16mm pots from Gorva Design. Gorva Design left no boxes unchecked when engineering their potentiometer lineup. Every element was carefully designed to offer builders an exceptional potentiometer with high durability and tight tolerances. Gorva potentiometers are made with stompboxes in mind but offer the same advantages to amplifiers, synthesizers, studio equipment and other electronics.
  • Solder lug / panel mount
  • Audio taper
  • +/- 10% tolerance
  • ¼” (6.35mm) solid shaft
  • Machine-pressed dust seal
  • High quality wiper material
  • Low residual resistance

For linear taper solder lug pots see R-VGORVA-BX-SL. For audio taper right-angle PCB mount pots see R-VGORVA-AX-PC. For linear taper right-angle PCB mount pots see R-VGORVA-BX-PC.
$1.45
Knob - Aluminum, Matte Finish, Set Screw, Short Line, 0.5" Diameter
Colors Available:
Anodized aluminum knob with short indicator line, set screw, and a matte metal finish. This solid aluminum knob has a straight knurled grip with a diameter of 0.5”. The knob also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts. For a larger version of this knob, see P-K611-X. For a brushed finish version of this knob, see P-K655X.
$2.19
Footswitch - 4PDT, Black, Solder Lugs
Quad Pole, Double Throw (4PDT), latching footswitch with 12 solder lugs.
$4.99
Indicator Light - Bakelite, Soviet, Incandescent, 9V
Colors Available:
New-old-stock Soviet pilot lights that operate on 9V. These lights have a unique bakelite frame and metal bezel. The lights come with a 9V bulb but can be used with any voltage bulb that fits this type of socket. The diameter of the light is 12mm and the diameter of the mounting hole is 8.1mm. Includes a wavy washer and knurled nut. Note: There can be small differences in the appearance and tint of the lens and color of the bakelite. A small 0.1” notch must either be filed into the 0.625” mounting hole or filed off of the fuse to flush mount with a panel. The small bulbs can come loose during shipping and reseating the bulb is recommended before use.
$5.95
PCB - Vintage Style Circuit Board, Iss. 1 Fuzz, Phenolic Board
Iss. 1 fuzz PCB made with a phenolic substrate for an even closer match to the vintage production boards. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This PCB is a recreation of the iss. 1 circuit board found in classic Fuzz Face pedals. When drawing the layout, multiple originals were closely referenced to ensure a proper match and fit. The copper traces are gold plated providing protection from corrosion indefinitely. This classic board fits the mounting holes on both original and reproduction Fuzz Face enclosures.
$4.50
PCB - Charge Pump, -9V from +9V, 3PDT Switch Mount
3PDT switch mounted charge pump PCB for positive ground effects. This small PCB simplifies the wiring of 3PDT foot switches in guitar pedals while also offering -9V when used with a standard +9V power supply. This is a great option for positive ground effects such as vintage fuzz pedals. The circuit of this PCB also features a protection diode and an LED indicator for when the effect is engaged.
This board is compatible with the MAX1044, TC1044S, TC7660S, and LT1054 charge pump ICs.
$1.60
¼" Jack - Stereo, PC Mount, Switched
1/4" stereo jack. 4 PC mount terminals include: tip, tip-shunt (normally closed), ring and sleeve. Metric threading: M12 x 1.0.
$2.50
Chassis Box - 1590A, Diecast, 3.64" x 1.52" x 1.06"
Colors Available:
Rugged, diecast aluminum alloy chassis box. Equivalent to Hammond's P-H1590A.
Starting at $6.29
Knob - Phenolic, Set Screw, Gaunt Chicken Head
High quality chicken head knobs with vintage gaunt design. The gaunt chicken head has a thinner band that extends above the base allowing for easy manipulation of the knob. This knob has a thick infilled indicator line and is made of solid phenolic. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
  • Height: 0.67 in.
  • Length: 1.26 in.
  • Fits ¼" shaft with set screw
$1.20