Pedal Parts / DIY
Capacitor - Mod® Electronics, 50V, Oil Filled, Axial Lead
Mod® Electronics Oil Caps are high quality, hand-crafted capacitors that are the perfect choice for guitars, amplifiers, and all audio equipment. Each capacitor is impregnated with mineral oil for a void-free winding providing highly stable capacitance. The capacitor is hermetically sealed in an aluminum casing to ensure a long life. The detailed construction results in a precise capacitance with a tolerance of ±10%. Mod® Oil Caps also feature a red stripe to designate the outside foil. The 50V series are in smaller packages that are perfect for guitars, effects and more.
- Casing: Hermetically sealed aluminum
- Dielectric: Mineral oil
- Lead Diameter: 20AWG
- Termination Style: Axial
- Tolerance: ±10%
- Values: .001 μF - .047 μF
- Voltage Rating: 50V
Starting at $5.50
Capacitor - Siemens, 250V, .1uF, Film
New old stock radial capacitors from Siemens with 10mm lead spacing. These 0.1uF film capacitors are rated for 250V. The construction matches the style found in vintage equipment such as the MKIII and MKIV Tone Bender pedals.
$5.95
Capacitor - Philips, KT-347, 400V, .015uF, Polyester Film
New old stock radial capacitors from Philips with 10mm lead spacing. The KT-347 series capacitors feature the same lacquer coating as the Mullard / Philips mustard caps found in classic Marshall amps and many vintage pedals. These NOS caps feature a low-inductive wound cell of metal foil and a polyethylene terephthalate film.
$2.25
Capacitor - Siemens, 250V, .22uF, Film
New old stock radial capacitors from Siemens with 10mm lead spacing. These 0.22uF film capacitors are rated for 250V. The construction matches the style found in vintage equipment such as the MKIII and MKIV Tone Bender pedals.
$5.95
Transistor - ACY31, Germanium, TO-1 case, PNP
ACY31 PNP germanium transistors. The ACY31 is a popular PNP for fuzz pedals and other effects. The ACY31 can be found in the rare CSL Super Fuzz version of the MKIV Tone Bender. This transistor is in a TO-1 package with long leads commonly found on germanium transistors.
$4.95
¼" Jack - Cliff, Solder Lug, Non-Switched, Plastic Nut
Solder terminals, non-switched. Used in many vintage pedals and amplifiers. For the switched version, see S-H902-X. Features:
- Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
- Tough, molded grade 1 black Nylon body.
- Made in the U.K.
- Supplied with a black nylon hexagonal mounting nut
- Designed to receive both mono and stereo ¼" jack plugs
- Withstand Voltage: 2000VDC Min.
- Maximum Current: 5A
- Temperature Rating: -10°C ~ +70°C
- Life (Minimum): 10,000+ Operations
- Nominal Contact Resistance: < 50 mΩ
Starting at $1.45
Lock Washer - Grounding, for S4 jack socket
EMI / RFI screen (grounding washer) for S2 and S4 Cliff jack sockets. This lock washer is added to S2/S4 Cliff jacks to provide a chassis/shield connection for the connection. Jacks sold separately.
$0.39
Bezel - Cliff, Black for S4 Jack Socket
Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.
Colors Available:
New!:
$0.30
¼" Jack - Cliff, Solder Lugs, Non-Switched, Metal Nut
Solder terminals, non-switched. Metal ferrule, vintage style found in many amplifiers and pedals. For the switched version, see S-H901-X. Features:
- Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability
- Tough, molded grade 1 black Nylon body.
- Made in the U.K.
- Supplied with a metal hexagonal mounting nut
- Designed to receive both mono and stereo ¼" jack plugs
- Withstand Voltage: 2000VDC Min.
- Maximum Current: 5A
- Temperature Rating: -10°C ~ +70°C
- Life (Minimum): 10,000+ Operations
- Nominal Contact Resistance: < 50 mΩ
Starting at $1.85
Ferrule - for Cliff UK Jacks, Black Plastic
Genuine Cliff ferrule for internal thread S4 jacks (3/8-20). This matte black ferrule works great with the S-H960-X washers to provide a unique look for inputs on amplifiers, pedals, and other equipment.
$0.45
Knob - Brass Insert, Set Screw, Fits ¼” Shafts
Brass inserts for knobs. Fits ¼” potentiometer shafts. Features a slotted set screw. These inserts are a great option for repairing knobs with stripped out set screws or for building DIY knobs using resin molds, 3D printing, or any other method.
$0.75
Chassis Box - Hammond, 1590J, Diecast, 5.7” x 3.7” x 1.9”
Large 5.709” x 3.37” x 1.933” Hammond 1590J enclosures. This enclosure is a great option for dense builds and is a popular choice for vintage style fuzz pedals with plenty of room for point to point wiring.
Colors Available:
New!:
- Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
- Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
- Vibra finished for a smooth surface with no sharp edges.
- Four 6-32 x ½" machine screws secure lid - into tapped holes.
- Designed to meet IP54.
- Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
- Dimensions shown are exterior dimensions.
- Add 0.16" to enclosure depth for lid.
Starting at $13.95
Standoff - M3 Threaded, Adhesive Backing
Adhesive backed standoff with M3 threading. The high-strength adhesive tape allows the standoff to be securely mounted, providing an easy option for mounting PCBs in enclosures. These standoffs use a captive metal nut in a strong nylon plastic base for a durable and lightweight solution.
$0.95
Transistor - AF101, Telefunken, Germanium, SO-2 glass case, PNP
AF101 PNP germanium transistors made by Telefunken. The AF101 is a PNP transistor recommended for mixer and IF stages and works well in effects that use germanium transistors such as fuzz and boost pedals. This transistor is in a unique SO-2 package and features the long leads commonly found on germanium transistors.
$2.85
Transistor - ASY76, Germanium, TO-5 case, PNP
ASY76 PNP germanium transistors. The ASY76 is a PNP transistor recommended for audio frequency amplifiers and drivers and works well in effects that use germanium transistors such as fuzz and boost pedals. This transistor is in a TO-5 package with long leads commonly found on germanium transistors.
$2.85
Transistor - BC149C, Silicon, Lockfit case, NPN
BC149C NPN transistor in a rare Mullard Lockfit package. The BC149C is the equivalent of a BC109C but in the Lockfit package rather than a TO-18. The BC149C was used in a variety of audio and radio equipment and works well for fuzz and other effects. It can be found in the Brian May treble boost and the Electrolabs Fuzz.
$0.85
Transistor - BC183A, ITT, General Purpose, TO-92 case, NPN
The BC183A transistors manufactured by ITT. The BC183A is a general purpose NPN transistor in a TO-92 case. It is commonly used in fuzz pedals and has a reputation as a warm sounding silicon transistor for fuzz. A version of the BC183A, the BC183KA can be found in some vintage Fuzz Face pedals.
$0.45
Transistor - AC162, Siemens, Germanium, TO-1 case, PNP
AC162 PNP germanium transistors made by Siemens. The AC162 is a popular PNP transistor among fuzz builders and is a great option for effects that use germanium transistors. This transistor is in a TO-1 package that is unique to Siemens transistors and features the long leads commonly found on germanium transistors.
$2.85
Transistor - OC84N, Germanium, TO-1 case, PNP
OC84N PNP germanium transistors. The OC84N is a great PNP for fuzz pedals and boost effects. It is the TO-1 version of the OC84 which can be found in many fuzz pedals such as MKII Tonebender and Supa Fuzz clones. This transistor features long leads commonly found on germanium transistors.
$11.95
Resistors - 0.5 Watt, Carbon Composition
Carbon composition resistors are made by mixing carbon particles with a binder molded into a cylindrical shaped, and then baked. Resistance decreases as temperature increases. Resistance is more prone to drifting than with other types. Standard 'classic' resistor. Sold in multiples of 5. 10% tolerance.
Transistor - BC108C, Philips, TO-18 case, NPN
BC108C NPN silicon transistors made by Philips. The BC108C is a popular NPN choice for fuzz pedals and other effects such as vintage silicon Fuzz Face builds and Big Muff clones.
$2.55
Transistor - BC181, Texas Instruments, TO-92 case, PNP
The BC181 is a general purpose PNP transistor manufactured by Texas Instruments. This low-power PNP bipolar junction transistor is in a TO-92 case.
$0.35
Parts Kit - Iss 1 Fuzz Pedal, Standard Version, Premium Build
PCB and parts kit for the Iss 1 fuzz built in the style of the standard germanium Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. The germanium PNP transistors are not included such that customers can select and test their own.
$41.86
Tool - Better Setter, Pepers’ Pedals, Knob Alignment
The Better Setter tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. The U-shaped slot is fitted around the pot shaft and the adjustable straight edge is then aligned and set to the edge of the enclosure. The two white lines on the U-shaped slot can then be used to set the knob to the beginning or end of the pot’s travel. Works best with 7mm bushing potentiometers.
$12.95