Pedal Parts / DIY

Genuine Carling DPDT 3 Position Mini Toggle, Round Bat, Solder Lugs

• DPDT ( Double Pole/ Double Throw) switch
• 0.354" bushing length
• 0.409” bat length
• ¼" chassis hole diameter
• Solder terminals

Original Dunlop snap-in, black battery box with snap-closed swing door for effects pedals using one 9 volt battery (accessed via the bottom of the pedal). Cutout dimensions: 2.46" x 1.27", box depth: 0.70", snaps over a panel thickness of about 0.04". Used on Dunlop Cry Baby Wah Wah GCB95 and many Dunlop effects pedals.

Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On

The NJM2120 is a dual operational amplifier of 2-INPUT and 1-OUTPUT with analog switch. The NJM2120 can be used as analog switch under the condition of GV=0dB, as Switch + Amp in order that each gain (A or B) can be adjusted independently. Each amplifier of the NJM2120 has the same electrical characteristics as the NJM4558. The NJM2120 is suitable for audio, video, electrical musical instrument, etc.

Carling mini-toggle switch, DPDT, 3 position, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 3-Position
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)
• Solder lugs

Solder terminals, switched. Used in modern Marshall amps. Features: Low-noise Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability, tough, molded grade 1 black Nylon body.

The AS394H is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.

Alpha Mini Pots with solid shaft and short PC mount terminals.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 3.8 mm (0.150”)
• Lead Distance from shaft center: 12.5 mm + 3.5 mm (0.492” + 0.138”)
• Lead Thickness: 0.5 mm (0.020”)

Dual low power opamps in an 8-pin DIP package. The TL062 offers a high input impedance and 1MHz bandwidth.

3PDT latching footswitch with PC terminals. Blue with 9 terminals. Made in Taiwan.

1.99″ x 1.99″ x 1.22″ (51mm x 51mm x 31mm) diecast aluminum enclosure. Equivalent to the Hammond P-H1590LBX enclosure. This enclosure is great for tap tempos and other utility pedals.

Prototyping circuit board (PCB) designed to fit the Hammond 1590B die-cast aluminum enclosure. It has a convenient 2-hole pattern, which provides an easy way to connect parts while maximizing usable board area. It can be used as a stand-alone prototyping board, or installed in a Hammond 1590B enclosure. For fastening your project to a surface see our adhesive standoffs (S-H190-X) Features:

• Single-sided high-quality FR4 glass-epoxy circuit board.
• Convenient 2-hole pattern provides an easy way to connect parts.
• 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.
• 0.042" holes are drilled on 0.1" (2.54mm) centers. 2 mounting holes.
• PCB Size 2.05 x 4.05 in (52.1 x 102.9 mm)

Standard size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 3/8" centers.

Leaded LED rings for use with standard footswitches. These LED rings use an array of LEDs with internal current limiting so no additional parts are required for use with 9VDC. Red, green, blue, and two-color combinations are available. A 15mm panel hole is required. See full dimensions below to check footswitch compatibility.

Set screw with brass insert, ¼" shaft. Measures 1.28" diameter x .71" tall.

High quality crush-proof boxes that are perfectly sized for stompboxes. This cardboard box features triple wall sides and double wall front and bottom ensuring a safe housing for your pedals. The inside dimensions 6” x 4” x 3" fit 1590BB, 1590N1, and 125B. These boxes are ideal for storing or packaging effects pedals.

Ceramic disc capacitors rated for up to 2kV, ± 10% tolerance.

Threaded through wide dress nuts for use with mini toggle switches. This wide based nut is not capped allowing the nut to thread past the top of the switch’s bushing. The uncapped top can be useful where internal depth is an issue such as parallel PCB mounting. These plated dress nuts feature a wide chamfered edge for a professional and unique look. These work on any 1/4-40 UNS threaded bushing. Two sides are flatted for use with a tool when fastening.

Hammond Mfg. Diecast Aluminum Chassis Box – 7.4” x 4.7” x 1.3”. Made in Taiwan. Key Features: • Rugged, diecast aluminum alloy (tough - yet easy to machine), electronic instrument enclosure.

Diecast Aluminum Chassis Box, 7.40" x 4.72" x 1.30". Six included machine screws secure lid. Add 0.16" to enclosure depth for lid.

• Rugged, diecast aluminum alloy (tough yet easy to machine), electronic instrument enclosure.
• Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding.
• Vibra finished for a smooth surface with no sharp edges.
• Six 6-32 x ½" machine screws secure lid - into tapped holes.
• Designed to meet IP54.
• Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.
• Dimensions shown are exterior dimensions.

Low profile DC jack with solder lugs. This jack is the perfect size for smaller builds where additional space is necessary. The low profile DC jack is also great for builds where aesthetics are a priority. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter. Features two solder lugs for tip and ring.

Fender® Style ¼" Mono Input Jack with 4 PCB Terminals.

OPA2134 SoundPlus™ Audio dual op-amp with low distortion, low noise and precision. The OPA2134 are ultra-low distortion, low-noise operational amplifiers fully specified for audio applications. A true FET input stage is incorporated to provide superior sound quality and speed for exceptional audio performance. This, in combination with high output drive capability and excellent DC performance, allows for use in a wide variety of demanding applications. In addition, the OPA2134 has a wide output swing, to within 1 V of the rails, allowing increased headroom and making it ideal for use in any audio circuit. The OPA2134 SoundPlus™ audio operational amplifiers are easy to use and free from phase-inversion and the overload problems often found in common FET-input operational amplifiers. They can be operated from ±2.5-V to ±18-V power supplies.