You are here

Pedal Parts / DIY

Filter these results
Sort By:
products per page
View Mode: List View · Grid View

Pages

(33 pages)
P-QTL072Op-Amp - TL072, Dual, Low-Noise, JFET Input, 8-Pin DIP

The TL072 is a high speed JFET input dual operational amplifier incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.


$0.70
$0.63
You save: 10%
Click to read more
R-VNUT-38Nut & Washer - Panel, for ⅜" Potentiometers
Replacement nut and washer for pots with a ⅜" bushing diameter.
$0.70
$0.63
You save: 10%
Click to read more
R-GResistors - ⅛ Watt, Metal Film, 1% tolerance
Package of 5

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. These 1/8W resistors have a very small body and are great for tight builds.


$0.75
$0.67
You save: 11%
Click to read more
P-ECB-RACKRack - gear, for wahs and other pedals

Generic rack with 18 teeth for wah and other pedals using rack and pinion potentiometer shaft rotation. (Length = 1.91", width = 0.19", height = 0.25". Mounting hole diameter = 0.075")


$0.75
$0.68
You save: 9%
Click to read more
P-Q4558Op-Amp - 4558, Dual high-gain, 8-Pin DIP

Dual Operational Amplifier. The 4558 integrated circuit is a dual high-gain operational amplifier internally compensated and constructed on a single silicon chip using an advanced epitaxial process. Combining the features of the NJM741 with the close parameter matching and tracking of a dual device on a monolithic chip results in unique performance characteristics. Excellent channel separation allows the use of the dual device in single NJM741 operational amplifier applications providing density. It is especially well suited for applications in differential-in, differential-out as well as in potentiometric amplifiers and where gain and phase matched channels are mandatory. Features:



  • Operating Voltage (±4V~±18V)
  • High Voltage Gain (100dB typ.)
  • High Input Resistance (5MΩ typ.)
  • Bipolar Technology

$0.75
$0.68
You save: 9%
Click to read more
P-PC-3PDT-BOARDPCB - Daughterboard for Wiring 3PDT Footswitches

Our 3PDT PCB daughterboard is a small board designed to simplify the wiring of 3PDT footswitches in guitar pedals. All inputs and outputs are clearly labeled on the PCB, removing any confusion about how the footswitch should be wired, and decreasing the chances of wiring mistakes or short-circuits.


$0.75
$0.68
You save: 9%
Click to read more
P-QPT2399Integrated Circuit - PT2399, Echo / Delay

PT2399 echo/delay chip used in many DIY and commercial pedals. The PT2399 is in a DIP 16 package. Minimal external components are required for use and delay time is set with resistance.


$0.78
$0.70
You save: 10%
On Backorder
Click to read more
P-QLM741Op-Amp - LM741, Single, general purpose, 8-Pin DIP

LM741 single opamp in an 8-pin DIP package. The LM741 has been used in classic guitar pedals such as the Distortion Plus.



The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439 and 748 in most applications. The amplifiers offer many features which make their application nearly foolproof: overload protection on the input and output, no latch-up when the common mode range is exceeded, as well as freedom from oscillations.


$0.79
$0.71
You save: 10%
Click to read more
P-L400LED Bezel - with included 3mm Red LED

Bezel Assembly with 3mm Red LED. Required hole size: 0.25". Washer and hex nut included. LED Specifications: Color Red Lens Diam 3 mm Overall Height 5.4 mm Lens Type Diffused Luminous Intensity Min. 3.6 mCd @If (test) 10 mA Wavelngth (Peak) 568 nm V(FM) Max.(V) Forward Voltage 2.7 V @I(F) (test) 10 mA Min Operating Temp -30° Max Operating Temp 80°


$0.85
$0.77
You save: 9%
Click to read more
S-H750-XPower Jack - DC Panel Mount, 5.5mm External, 2.1mm Internal
Colors Available:

½" panel mount with solder lugs. Round plastic with normally closed switch. For barrel plugs with a 5.5mm external diameter and 2.1mm internal diameter.


$0.95
$0.85
You save: 11%
Click to read more

Pages

(33 pages)
Don't see a product you're looking for? Send us your product suggestions!
Subscribe to RSS - Pedal Parts / DIY